Aicaigou LogoB2B WikiIndustrial Encyclopedia

Non-heating Anchoring Material

Updated: 2026-07-22

Overview

Non-heated anchoring material is a polymer-based adhesive designed to secure metal fixtures in concrete and masonry without thermal activation. Unlike traditional epoxy anchors requiring heat, it cures at ambient temperatures through chemical reactions, making it suitable for on-site construction and repairs. This material is typically formulated with modified epoxy, vinyl ester, or polyester resins, combined with mineral fillers for enhanced mechanical properties. Its cold-cure feature simplifies installation in environments where heating equipment is impractical or hazardous, such as confined spaces or explosive atmospheres.

Physical and Chemical Properties

LHMH-II型 洛杉矶磨耗试验机 沥青混合料试验仪器一测仪器设备(河北)有限公司

The material exhibits high tensile strength (often 20–30 MPa) and bond strength to concrete (exceeding 15 MPa), ensuring reliable load transfer. Its viscosity allows deep hole penetration, while low shrinkage during curing minimizes stress buildup. Most formulations achieve initial set within 30–90 minutes and full cure in 24–72 hours, depending on temperature and humidity. Chemically, cured anchors resist water, oils, and mild acids, though prolonged UV exposure may degrade performance. Temperature tolerance ranges from -40°C to +80°C for standard grades, with high-temperature variants available. The absence of volatile organic compounds (VOCs) in many modern formulations complies with environmental regulations.

商家经验真实案例 · 安全可信
混凝土地面修补砂浆
本文详细介绍混凝土地面修补砂浆的特性与应用,包括其材料组成、施工要点及常见问题解决方案,帮助读者了解如何有效修复破损混凝土地面。

Main Applications

Primary uses include securing rebar in concrete overlaps, installing structural steel columns, and anchoring heavy machinery in industrial floors. It is indispensable for seismic retrofitting of bridges and buildings, where drilled-in anchors must absorb dynamic loads. In infrastructure projects, the material fixes guardrails, signage, and electrical conduits. M&E contractors use it for HVAC equipment anchoring, avoiding vibrations that loosen mechanical fasteners. Unlike expansion anchors, it distributes loads evenly without creating radial stresses that could crack brittle substrates.

Safety and Storage

广惠仪器 标准养护室自动控湿控温设备 移动标养室河北广惠试验仪器有限公司

Uncured components may cause skin irritation or respiratory sensitization. Always use nitrile gloves and NIOSH-approved respirators in poorly ventilated areas. Accidental eye contact requires immediate flushing with water for 15 minutes and medical attention. Store resin and hardener separately in original containers, away from heat sources. Frozen material must be thawed at room temperature for 24 hours before use. Shelf life is typically 12–18 months from manufacture; expired product shows separation or viscosity changes. Dispose of waste according to local hazardous material regulations.

商家经验真实案例 · 安全可信
溪流坝铁丝网砂浆加固法
本文详细介绍溪流坝采用铁丝网与砂浆结合的加固技术,包括材料选择、施工步骤及效果评估,为水利工程提供实用的加固方案。

B2B Procurement Guide

When sourcing, specify required pullout strength (e.g., for overhead anchors) and substrate type (cracked vs. uncracked concrete). Reputable suppliers provide technical datasheets with third-party test reports. Bulk buyers should request batch testing certificates to ensure consistency. For large projects, consider pre-qualifying products through mockup tests simulating actual load conditions. Delivery logistics matter—some formulations require temperature-controlled transport. Negotiate MOQs (Minimum Order Quantities) and lead times, especially for customized fast-cure or underwater grades. Partner with suppliers offering field technical support for complex installations.

Related Manufacturers