Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Nitrate Nitrogen Reagent

Updated: 2026-07-19

Overview

Nitrate Nitrogen Reagent is a specialized chemical solution designed to detect and measure nitrate nitrogen (NO₃-N) concentrations in water and soil samples. It is widely used in environmental science, agriculture, and industrial applications to assess water quality and soil fertility. The reagent reacts with nitrate ions to produce a measurable color change, which can be quantified using spectrophotometry or colorimetric methods. Its accuracy and reliability make it indispensable for laboratories and field testing. The reagent is typically supplied as a ready-to-use solution or in concentrated form, requiring dilution before use. Its formulation ensures minimal interference from other ions, providing precise results. Due to its critical role in environmental and agricultural testing, the reagent must meet stringent quality standards to ensure consistent performance.

Physical and Chemical Properties

路博环保 硝酸盐氮快速检测包 水质比色卡 快检试剂包青岛恒昌盛旭环保科技有限公司

Nitrate Nitrogen Reagent is a water-soluble liquid, often appearing clear or slightly colored. Its density ranges between 1.0 and 1.2 g/cm³, depending on the concentration. The reagent is stable under normal storage conditions but may degrade if exposed to extreme temperatures or prolonged sunlight. It is designed to react specifically with nitrate ions, producing a distinct color change that correlates with nitrate concentration. The reagent's sensitivity allows it to detect nitrate levels as low as 0.1 mg/L, making it suitable for both high-precision laboratory analysis and field testing. Its chemical stability ensures long shelf life when stored properly, though users should always check expiration dates to avoid compromised results.

商家经验真实案例 · 安全可信
庚烷与正己烷UN号
本文解析庚烷与正己烷的UN编号及其特性差异,帮助读者快速区分这两种常见工业溶剂,并了解其安全运输的关键要点。

Main Applications

Nitrate Nitrogen Reagent is primarily used in environmental monitoring to assess nitrate pollution in water bodies, which can indicate agricultural runoff or industrial contamination. In agriculture, it helps determine soil nitrate levels, guiding fertilizer application to optimize crop yields while minimizing environmental impact. Wastewater treatment plants use the reagent to monitor effluent quality and ensure compliance with regulatory standards. Additionally, the reagent is employed in research laboratories to study nitrogen cycles and water quality dynamics. Its versatility and accuracy make it a staple in fields requiring precise nitrate measurement. Some advanced formulations are also used in automated testing systems for high-throughput analysis.

Safety and Storage

连华科技硝酸盐氮试剂LH-NO3-100个样苏州兰城仪器设备有限公司

While Nitrate Nitrogen Reagent is generally safe when handled properly, it can cause irritation upon contact with skin or eyes. Users should wear appropriate personal protective equipment (PPE), including gloves and goggles, and work in a well-ventilated area. In case of accidental exposure, rinse affected areas with plenty of water and seek medical advice if irritation persists. The reagent should be stored in a cool, dry place, away from direct sunlight and heat sources. Containers must be tightly sealed to prevent evaporation or contamination. Shelf life typically ranges from 6 months to 2 years, depending on the formulation, so users should always check labels for expiration dates and storage recommendations.

商家经验真实案例 · 安全可信
正己烷旋转蒸发温度
本文解析正己烷旋转蒸发的合适温度范围,探讨温度选择对溶剂回收效率与安全性的影响,并提供操作中的实用建议,帮助实验人员优化蒸发过程。

B2B Procurement Guide

When procuring Nitrate Nitrogen Reagent, buyers should prioritize suppliers who provide certificates of analysis (CoA) to verify product quality and compliance with industry standards (e.g., EPA, ISO). Bulk purchases may offer cost savings, but storage capacity and shelf life must be considered to avoid waste. It is also advisable to request technical support from suppliers for proper usage and troubleshooting. For laboratories with specific needs, customized formulations or packaging options may be available. Buyers should compare prices and lead times across multiple suppliers to ensure timely delivery and cost-effectiveness. Establishing long-term relationships with reputable suppliers can also secure consistent quality and reliable supply chains.

Related Manufacturers