Overview
N-Methyl-3-pyrrolidone (NMP) is an organic compound belonging to the class of cyclic amides known as pyrrolidones. First commercialized in the 1950s, it has become an essential industrial solvent due to its exceptional solvency power and favorable physical properties. The compound features a five-membered lactam ring structure with a methyl group attached to the nitrogen atom. As a polar aprotic solvent, NMP dissolves a wide range of organic and inorganic materials while remaining chemically stable under most conditions. Its balanced properties of high boiling point, low freezing point, and moderate evaporation rate make it particularly valuable for processes requiring controlled solvent behavior. The global NMP market continues to grow, driven by demand from electronics and energy storage applications.
Physical and Chemical Properties
NMP demonstrates several notable physical characteristics that contribute to its industrial utility. With a viscosity of 1.65 cP at 25°C and surface tension of 40.7 mN/m, it flows readily while maintaining good wetting properties. The solvent has a dielectric constant of 32.2, indicating strong polarity that enables dissolution of ionic compounds. Chemically, NMP exhibits stability across a pH range of 5-9 and shows resistance to reduction under normal conditions. However, it can undergo hydrolysis at elevated temperatures in strongly acidic or alkaline environments. The compound's flash point of 96°C (closed cup) classifies it as combustible rather than flammable, requiring appropriate handling precautions. Its autoignition temperature of 245°C suggests moderate thermal stability under processing conditions.
Main Applications
In the pharmaceutical industry, NMP serves as a reaction medium for API synthesis and as an excipient in drug formulations. Its ability to enhance transdermal absorption makes it valuable for topical preparations. The electronics sector utilizes NMP extensively in photoresist stripping, wafer cleaning, and as a solvent for polyimide coatings in flexible circuits. The agrochemical industry employs NMP in pesticide formulations where its solvency improves active ingredient dispersion. Polymer applications include use as a spinning solvent for aromatic polyamides and as a processing aid for engineering plastics. Emerging uses include lithium-ion battery electrode production, where NMP aids in slurry preparation for cathode materials. In petrochemical processing, it functions as an extraction solvent for aromatics separation.
Safety and Storage
NMP requires careful handling due to potential health effects, including skin irritation and reproductive toxicity. The European Union has classified it as a substance of very high concern (SVHC) under REACH regulations. Appropriate personal protective equipment including nitrile gloves and chemical goggles should be used when handling. Storage should be in sealed containers made of stainless steel, polyethylene, or glass, protected from direct sunlight. Secondary containment is recommended to prevent environmental release in case of primary container failure. The solvent is incompatible with strong oxidizing agents and acids, which may cause dangerous reactions. Facilities should maintain proper ventilation to keep airborne concentrations below occupational exposure limits (typically 10-50 ppm).
B2B Procurement Guide
When procuring NMP commercially, buyers should specify technical grade (typically 99.5% purity) or electronic grade (99.9%+ purity with lower metal content) depending on application requirements. Bulk shipments commonly occur in isotanks (20-25 metric tons) or drums (200 kg), with some suppliers offering intermediate bulk containers (IBCs). Key procurement considerations include verifying compliance with regional chemical regulations (e.g., REACH, TSCA), obtaining complete safety data sheets, and confirming supply chain reliability. Prices fluctuate with raw material (butyrolactone and methylamine) costs and energy prices. Some manufacturers offer toll processing services for specialized applications. Buyers should evaluate supplier capabilities for consistent quality control and technical support.
Related Manufacturers
- 主营：增塑剂、顺酐、环丁砜、二甲基亚砜、二甲基二硫醚、赋臭剂、四氢噻吩加臭剂、环戊烷、塑化剂、二辛酯、石油醚、异丁醇、氯化苄、叔十二硫醇、硬脂酸钙、树脂涂料、四氢噻吩、化学试剂、国标染料、氯乙酸、硬脂酸锌、乙二醛、异辛烷、橡胶塑料
- 主营：除油剂、乙酰氯、凡士林、甲基甲胺、硫酸铜、异丙醇、三乙胺、漂白粉、丙烯酸、硬脂酸、制冷剂、石油醚、清洗剂、铭酸酐、脱硝剂、二氯甲烷、涂料油墨、正丁酰氯、盐酸羟胺、印染助剂、四氢呋喃、环氧丙烷、偏硅酸钠、过硫酸钠、氢氧化钾、橡胶助剂
- 主营：四氢噻吩、乙酰氯、氢氟酸、二甲基亚砜、二甲基二硫醚、二甲基硫醚、二甲苯、甲酰胺、丙烯腈、正丙醇、水杨酸、甲酸钠、正丙醛、苯甲醛、丙二腈、硬脂酸、石油醚、水合肼、氯乙酸、乙二醛、乙二醇、异戊烷、苯乙烯、仲丁胺、叔丁醇
- 主营：鲁西辛醇、丙烯酸、丙烯酸异冰片酯、二甲基亚砜、N-甲基吡咯烷酮、甲基丙烯酸、甲基丙烯酸甲酯、环氧氯丙烷、二乙二醇、二乙二醇甲乙醚、环己胺、二氯甲烷、乙二醇二甲醚、丙二醇甲醚醋酸酯、二氯乙烷、苯乙烯、丙烯酸丁酯、丙烯酸羟乙酯、丙烯酸异辛酯、1.2丙二醇、二辛酯、溶剂油、衣康酸、正丁醇
- 主营：糖精钠 128-44-9、70693-62-8 过硫酸氢钾、水杨酸钠 54-21-7、硫化钴 12013-10-4、聚乙烯胺、烯丙基磺酸钠
- 主营：棕榈酸、乙酸铋、异喹啉、2-乙二硫醇、4-二氟苄溴|、3-丙烷磺内酯、胶粘剂、丙烯酸酯、化学试剂、分析试剂、透明液体、二乙二醇、光引发剂、岩白菜素、对甲苯磺酸、苯甲酸苄酯、偏苯三酸酐、六氟异丙醇、纳米氧化铽、六氟磷酸铯、表面活性剂、蓖麻醇酸锌、乙基纤维素、荧光指示剂、丙烯酸羟乙酯
- 主营：磺酰胺、氧化铌、除醛剂、硅化镱、基硅油、成核剂、酞菁钴、甘氨酸铬、光学树脂、鼠李糖脂、甲磺酸铋、氧化亚铁、封端硅油、左旋乳酸)、六水氯化钇、己基磺酸盐、恩诺沙星钠、二聚季戊四醇、聚醚硫酸酯钠、恶唑啉交联剂、洗手凝胶增稠剂、生物活性玻璃粉、氰基丙烯酸乙酯、脱硫脱氢催化剂
- 主营：乙酸铵、甲乙酮肟、多种包装、2-己酮肟、8-溴辛酸、3-氯代苯酐、4-氯代苯酐、3-硝基苯酐、1-氯甲基萘、n-苯基乙醇胺、4-甲基苯丁酮、3-甲基尿嘧啶、6-氨基间甲酚、间甲基苯甲酸、对甲基苯甲酸、3.4-二氨基甲苯、2-羟基-5-溴烟酸、间苯二甲、异丁酰胺、工中间体、定制包装、树脂促进剂、邻氨基对甲酚、间氨基苯甲酸、对氨基苯甲酸
- 主营：网站建设、企业官网设计、网站搭建
- 主营：黑檀醇、丙烷三、龙涎酮、三羟甲基、7-羟基香豆素、4-氟苯肼盐酸盐、丁酸己酯、丙烯酸酯、茉莉内酯、二乙氨基乙醇、半胱胺盐酸盐、乙基乙烯基醚、叔丁基对苯二酚、优级支链烷基苯
- 主营：化学试剂、日用化工品、医药中间体、甲基、生化试剂、过渡金属、高端材料
- 主营：羟基磷灰石头、二醋酸纤维素、间苯二甲酸二甲酯、甲基丙烯酸镁、DL-苹果酸、抗氧化剂1135、苯代三聚氰胺、苄索氯铵、柏木脑、乳酸铵、咪唑、明胶、靛红酸酐、异噻唑啉酮、海藻酸
- 主营：药品检测标准品、药物杂质标准品、对照品、中药对照药材、中药农残空白基质、分析标准品、仪器检测校准品、金属离子标准溶液、滴定溶液、食品检测标准物质、有机检测标准溶液、指示液、缓冲液、电导率溶液、PH标准溶液、熔点标准品、国家标准物质、比色液
- 主营：吡啶盐酸盐
- 主营：盐酸多奈、多非利特、乙醇酸东、7583、盐酸阿考、吡啶甲酸、芜地溴铵、基乙醇酸、羟基苯甲醛、溴铵一水合、吡咯烷系列