Aicaigou LogoB2B WikiIndustrial Encyclopedia

MT48LC8M16A2-7EG

Updated: 2026-08-28

Overview

The MT48LC8M16A2-7EG is a synchronous DRAM component from Micron Technology's extensive memory product line. As a 128-megabit (16MB) device organized as 8M × 16, it represents a mature technology solution for applications requiring moderate memory capacity with reliable performance. The component operates at a clock frequency of 143MHz with a 7ns access time, making it suitable for real-time systems where predictable latency is crucial. Manufactured using Micron's advanced semiconductor processes, this SDRAM is designed for longevity in the industrial and embedded markets. Its -7E speed grade designation indicates industrial temperature range capability (-40°C to +85°C), distinguishing it from commercial-grade alternatives. The device supports burst lengths of 1, 2, 4, 8, or full-page and features programmable burst read and write operations.

Structure and Working Principle

MT48LC8M16A2TG-7E:G TR 电子元器件 Micron/美光 批次最新批次深圳楷东科技有限公司

The MT48LC8M16A2-7EG employs a four-bank architecture that allows concurrent activation of different memory banks, improving overall system performance. Each bank contains an array of memory cells organized in rows and columns, with synchronous interface timing that coordinates all operations with the system clock. The device uses pipelined architecture to enable high-speed operation while maintaining data integrity. Internally, the memory utilizes a double-pumped (DDR) bus running at twice the clock frequency for address and control signals, while maintaining a single data rate for the 16-bit data bus. This hybrid approach provides a balance between performance and power consumption. The memory array is refreshed automatically through either auto-refresh or self-refresh commands, with a refresh period of 64ms for all 8,192 rows.

商家经验真实案例 · 安全可信
能源矿机芯片直营
本文探讨能源矿机芯片直营模式的特点和优势,分析其在B2B采购中的应用场景,并解析如何通过直营渠道获得更可靠的芯片供应和技术支持。

Key Features

The MT48LC8M16A2-7EG offers several distinguishing features that make it valuable for industrial applications. Its programmable CAS latency (2 or 3 cycles) allows optimization for different system requirements, while the burst mode operation enhances data transfer efficiency. The device includes a temperature-compensated self-refresh (TCSR) feature that automatically adjusts refresh rates based on operating conditions. Power management is a critical aspect, with the component supporting multiple low-power states including power-down and deep power-down modes. The 2.5V/3.3V dual voltage capability provides design flexibility, though all inputs are LVTTL-compatible regardless of supply voltage. Error detection is facilitated through a built-in write mask function that allows selective writing to specific bytes during write operations.

Application Areas

This SDRAM finds extensive use in industrial automation systems where reliable memory operation under varying environmental conditions is essential. Common applications include programmable logic controllers (PLCs), human-machine interfaces (HMIs), and industrial PCs. Its predictable timing characteristics make it particularly suitable for real-time control systems. The networking sector utilizes the MT48LC8M16A2-7EG in routers, switches, and gateways where moderate memory capacity meets the requirements for packet buffering and routing tables. Embedded computing platforms, including single-board computers and system-on-module designs, frequently incorporate this memory component due to its balance of performance, power efficiency, and industrial-grade reliability.

Maintenance and Precautions

回收工厂余料 回收呆料 进口ic回收 SGM2019-1.8YN5G/TR深圳市富源生电子有限公司

Proper handling of the MT48LC8M16A2-7EG is essential to prevent electrostatic discharge (ESD) damage. All standard semiconductor handling procedures should be followed, including the use of grounded workstations and ESD-safe packaging during transport. The device should be stored in moisture-sensitive packaging until ready for use, with attention to the manufacturer's recommended shelf life. System designers should ensure proper power sequencing during startup and shutdown to prevent latch-up conditions. Decoupling capacitors should be placed as close as possible to the power pins, following the manufacturer's layout guidelines. Thermal management is generally not required for individual devices, but high-density board layouts may necessitate airflow considerations.

商家经验真实案例 · 安全可信
芯片维修速度慢
本文解析芯片维修速度慢的常见原因,包括检测流程、设备性能和维修工艺等影响因素,并提供优化建议,帮助提升维修效率。

B2B Procurement Guide

When sourcing the MT48LC8M16A2-7EG, buyers should first verify the required temperature grade (-7E for industrial) and package type (typically 54-pin TSOP II). Lead times can vary significantly depending on market conditions, so advance planning is recommended. Many distributors offer both new and factory-sealed surplus stock, with appropriate price differentials. Quality assurance is critical - reputable suppliers should provide traceability to Micron's manufacturing lots. For high-volume purchases, direct engagement with Micron's distribution network may yield better pricing and allocation security. Buyers should be aware of common counterfeit indicators such as mismarked date codes, inconsistent laser marking, or unusual packaging. Consider requesting samples for testing before large purchases.

Related Manufacturers