Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Moisture-proof Cable Compound

Updated: 2026-07-21

Overview

Moisture-proof cable special material refers to specialized polymer compounds engineered to provide superior protection against moisture penetration in electrical wiring systems. These materials are formulated with additives that create a hydrophobic barrier while maintaining excellent electrical insulation properties. Primarily based on polyethylene (PE) or polyvinyl chloride (PVC) polymers, these compounds undergo rigorous testing to ensure performance in wet environments. The global market for these materials is growing steadily, driven by increasing infrastructure development and stricter safety regulations for electrical installations in challenging environments.

Physical and Chemical Properties

PP韩国SK B350F 尺寸稳定性好 抗冲共聚物 聚丙烯 pp塑料上海苏逸曦塑化有限公司

The material exhibits low water absorption rates (typically <0.1% after 24 hours immersion), crucial for maintaining dielectric properties in humid conditions. Its volume resistivity remains high (>10¹⁴ Ω·cm) even after prolonged exposure to moisture. Modern formulations often incorporate UV stabilizers for outdoor use and flame retardants for safety compliance. The mechanical properties include good flexibility (important for cable installation) and tensile strength (usually 10-20 MPa), allowing cables to withstand mechanical stresses during deployment and operation.

商家经验真实案例 · 安全可信
TPU 1195A10与HF-1195A-2区别
本文对比TPU 1195A10和HF-1195A-2两种材料的性能差异,从硬度、耐磨性和适用场景三方面解析其特点,帮助工业采购者快速匹配需求。

Main Applications

The primary application is in manufacturing moisture-resistant power and communication cables for underground installations, where constant ground moisture would degrade standard insulation. Marine and offshore applications account for about 25% of usage, particularly for shipboard wiring and subsea cables. Industrial plants with high humidity environments (e.g., paper mills, wastewater treatment facilities) represent another major market segment. Some specialized formulations are used in military applications where reliability in tropical or arctic conditions is critical.

Safety and Storage

注塑TPE本色包胶料挤出吹塑压涎成型tpe耐磨汽车配件原料东莞市鑫塑源塑胶科技有限公司

While generally stable at room temperature, the material requires proper handling during processing (typically 150-200°C) with adequate ventilation due to potential fume emission. Finished cables made with this material are classified as low-hazard under normal use conditions. Storage should maintain the material below 30°C and 60% relative humidity to prevent moisture absorption before processing. Bulk quantities are usually packaged in moisture-proof bags with desiccants, while smaller quantities may use sealed containers. Shelf life is typically 12-24 months when stored properly.

商家经验真实案例 · 安全可信
PC料产品料花调试指南
本文针对PC料产品生产过程中出现的料花问题,提供系统化的调试方案,从温度控制、模具优化到工艺调整三个维度,帮助解决材料表面瑕疵问题。

B2B Procurement Guide

When sourcing moisture-proof cable materials, buyers should prioritize suppliers with ISO 9001 certification and specific expertise in cable compounds. Technical specifications should include water absorption rate (ASTM D570), dielectric strength (IEC 60243), and volume resistivity (IEC 60093). For large-volume procurement (10+ tons), consider requesting custom formulations to optimize cost-performance for specific applications. Lead times typically range from 2-6 weeks depending on formulation complexity and order volume. Quality verification should include third-party testing reports and material certification for relevant industry standards.

Related Manufacturers