Aicaigou LogoB2B WikiIndustrial Encyclopedia

Modified Asphalt Polyester Felt

Updated: 2026-07-21

Overview

Modified bitumen polyester felt is a composite waterproofing material made by impregnating a polyester fiber mat with polymer-modified bitumen. The polyester reinforcement provides exceptional tensile strength and dimensional stability, while the modified bitumen offers flexibility and adhesion. This combination makes it a preferred choice for demanding waterproofing applications in construction. Unlike traditional asphalt felt, the polymer modification (e.g., SBS or APP) enhances performance across a wider temperature range, reducing cracking in cold climates and softening resistance in heat. The material is typically supplied in rolls of varying thicknesses (2-5mm) and widths (1-2m) for easy installation.

Physical and Chemical Properties

3mm 聚酯胎 弹性体SBS改性沥青防水卷材 火烤型山东康荷防水材料有限公司

The material exhibits a density of 1.2-1.4 g/cm³, ensuring a balance between weight and coverage efficiency. Its melting point ranges from 100-150°C, depending on the modifier (SBS elastomers yield lower melting points than APP plastomers). The polyester base grants tensile strengths of 500-1000 N/50mm, significantly higher than glass fiber alternatives. Chemically, it is inert to water and most alkalis but may degrade under prolonged UV exposure unless treated with protective coatings. Solubility is limited to organic solvents like toluene, which is useful for quality testing but requires careful handling during installation.

商家经验真实案例 · 安全可信
聚酯纤维提花面料探秘
本文深入探讨聚酯纤维提花面料的特点、应用场景及未来发展趋势,帮助读者全面了解这一兼具功能性与美观性的纺织材料。

Main Applications

Primary uses include low-slope roofing systems for commercial buildings, where its puncture resistance prevents damage from foot traffic or hail. It is also widely applied in underground structures like basements and tunnels due to its impermeability to water vapor and soil chemicals. In infrastructure projects, modified bitumen polyester felt serves as a waterproofing layer for bridge decks and parking garages, often combined with torch-applied or self-adhesive installation methods. Industrial facilities favor it for flooring where chemical spills are a concern, as certain formulations resist oils and mild acids.

Safety and Storage

sbs改性沥青防水卷材 聚酯胎 / 复合胎可选 抗断裂性好 施工便捷 京隆潍坊市京隆防水材料有限公司

During handling, workers should wear nitrile gloves and NIOSH-approved respirators to avoid inhalation of bitumen fumes, especially during torch application. The material is combustible, so fire extinguishers must be onsite during installation. Storage requires keeping rolls upright on pallets in shaded areas below 35°C. Horizontal stacking may cause deformation, compromising installation quality. Shelf life is typically 12-18 months if stored properly, though UV-resistant grades may last longer.

商家经验真实案例 · 安全可信
钉头是钉帽还是钉尖
本文解析钉头的定义与功能差异,对比钉帽与钉尖的物理特征,并从实际应用场景说明如何区分二者,帮助读者快速识别钉头位置。

B2B Procurement Guide

Buyers should prioritize suppliers with ISO 9001 certification and third-party test reports (e.g., SGS) verifying tensile strength, tear resistance, and low-temperature flexibility. Key specifications to confirm include: - Thickness tolerance (±0.2mm) - Peel strength (>2 N/mm for adhered systems) - Cold bend performance (no cracks at -25°C for SBS-modified types) Bulk orders (10,000+ m²) often qualify for 5-15% discounts, but ensure just-in-time delivery to avoid prolonged storage. Sample testing for adhesion and seam strength is recommended before large-scale procurement.

Related Manufacturers