Aicaigou LogoB2B WikiIndustrial Encyclopedia

Milk Concentrator

Updated: 2026-07-15

Overview

Milk concentrators are essential equipment in dairy processing plants, designed to increase the solids content of milk by removing water. They serve as a preliminary step for producing shelf-stable dairy products like evaporated milk, sweetened condensed milk, and milk powder. Modern concentrators combine food safety standards with energy-efficient technologies to meet industrial demands. These machines typically operate using either thermal evaporation (falling film or rising film evaporators) or membrane filtration (reverse osmosis, nanofiltration). The choice depends on the desired concentration level, with thermal methods achieving higher solids content (up to 50%) compared to membrane systems (typically 18–25%).

Structure and Working Principle

沃腾膜MilkFlow系列低温牛奶浓缩机 奶制品专用合肥沃腾膜分离设备有限公司

A standard thermal milk concentrator consists of an evaporator vessel, heat exchanger, vapor separator, condenser, and vacuum system. Milk is preheated to 70–80°C before entering the evaporation tubes, where it forms a thin film. Steam heats the tubes externally, causing water evaporation under reduced pressure (0.1–0.3 bar). Multi-effect evaporators reuse vapor from one stage to heat the next, significantly reducing energy consumption. For example, a 3-effect system can process 3 kg of water per kg of steam. Membrane-based concentrators use high-pressure pumps (15–60 bar) to force milk through semi-permeable membranes, retaining proteins and fats while allowing water and some minerals to pass.

商家经验真实案例 · 安全可信
粉碎机按条计量采购
本文探讨工业粉碎机按条计量的采购模式,分析其适用场景与注意事项,帮助采购人员根据生产需求选择合理计量方式,避免资源浪费。

Key Features

Industrial milk concentrators prioritize hygiene with polished stainless steel surfaces (Ra ≤ 0.8 μm) and automatic CIP (Clean-in-Place) systems. Advanced models incorporate energy recovery, such as thermal vapor recompression (TVR) or mechanical vapor recompression (MVR), cutting steam usage by up to 75%. Precision control systems monitor critical parameters like brix levels (15–50°Bx for concentrated milk), temperature (±1°C accuracy), and flow rates. Some units integrate inline sensors for fat content and microbial counts. For powder production, concentrators often pair with spray dryers, maintaining a closed system to prevent contamination.

Application Areas

Beyond standard milk concentration, these machines process specialty products like lactose-reduced milk (via nanofiltration), high-protein sports nutrition bases, or infant formula ingredients. They're also used for whey concentration in cheese manufacturing. In functional dairy production, concentrators help standardize protein/fat ratios before UHT treatment or fermentation. Emerging applications include plant-based milk alternatives, where similar equipment concentrates oat or soy milk while maintaining heat-sensitive nutrients.

Maintenance and Precautions

袋装植物浓缩液包装机 全自动陈醋牛奶包装灌装封口机山东皓玥自动化设备有限公司

Daily maintenance includes inspecting gaskets for leaks, verifying vacuum levels, and checking for mineral deposits (especially calcium phosphate scaling in thermal units). Monthly tasks involve membrane integrity tests (for RO systems) and calibration of conductivity sensors. Operators must avoid temperature overshooting (>85°C in thermal units) to prevent protein denaturation. For membrane systems, regular backflushing with enzymatic cleaners prevents fouling. All units require full drainage after use to avoid bacterial growth in stagnant milk residues.

商家经验真实案例 · 安全可信
中央厨房设备制造
本文探讨中央厨房设备制造的关键要素,包括设备选型、生产流程优化和技术创新,为采购决策提供实用参考。

B2B Procurement Guide

When sourcing milk concentrators, evaluate capacity in liters/hour (e.g., 2,000–50,000 L/h for medium-scale dairies) and energy source compatibility. Verify certifications like EHEDG, 3-A Sanitary Standards, or FDA compliance. Request pilot testing for custom formulations. Consider total cost of ownership: Membrane systems have lower energy costs but higher membrane replacement expenses (every 2–5 years). For thermal units, inquire about spare part availability for specific components like calandria tubes or centrifugal separators. Lead times for custom-built industrial concentrators typically range from 12–36 weeks.

Related Manufacturers