Overview
Polyacrylamide microparticles (PAM) are synthetic polymers derived from acrylamide monomers, widely recognized for their flocculation and viscosity-enhancing properties. They are extensively used in industrial processes due to their ability to form bridges between particles, facilitating aggregation and sedimentation. These microparticles are classified based on their ionic charge (anionic, cationic, or non-ionic), each suited for specific applications. Their high molecular weight and water solubility make them ideal for large-scale operations like wastewater treatment and oilfield recovery.
Physical and Chemical Properties
Polyacrylamide microparticles exhibit a white to off-white granular or powdered appearance. They dissolve readily in water, forming viscous solutions that can significantly alter fluid dynamics. Their molecular weight ranges from 1 to 30 million g/mol, influencing their performance in different applications. Thermal stability is moderate, with decomposition occurring before melting. The material is generally stable under normal storage conditions but degrades under prolonged exposure to UV light or extreme temperatures. Its density is approximately 1.3 g/cm³, and it is non-volatile.
Main Applications
In water treatment, PAM microparticles are used to remove suspended solids and clarify effluent. Their flocculation properties make them indispensable in municipal and industrial wastewater plants. In the oil industry, they enhance oil recovery by thickening injected water, improving sweep efficiency. The papermaking industry uses PAM to improve retention and drainage, while mining operations employ it for tailings dewatering and sediment control.
Safety and Storage
While polyacrylamide microparticles are generally non-toxic, prolonged exposure to dust should be avoided to prevent respiratory irritation. Use gloves and protective eyewear when handling the powder form. Store in a dry, cool environment away from direct sunlight and moisture. Properly sealed containers are essential to maintain product integrity. Shelf life is typically 12-24 months under optimal conditions.
B2B Procurement Guide
When procuring PAM microparticles, specify the required ionic type (anionic, cationic, or non-ionic) and molecular weight to match your application. Bulk purchases often attract discounts, but verify storage capacity to prevent degradation. Reliable suppliers should provide certificates of analysis (CoA) detailing purity and performance metrics. For water treatment, opt for products with low residual acrylamide content (<0.05%) to meet regulatory standards.
Related Manufacturers
- 主营：水处理剂、水处理药剂、聚合氯化铝、聚丙烯酰胺、粉末污水处理、阳离子絮凝剂、阴离子絮凝剂、净水材料
- 主营：除磷剂、泥水分、絮凝剂、聚丙烯酰胺、水处理剂、废水处理、聚合氯化铝、聚合硫酸铁、泳池水处理、工业废水除浊、矿山泥浆废水、工业废水专用pam、污泥脱水增稠剂
- 主营：[]
- 主营：椰壳活性炭、果壳活性炭、煤质柱状活性炭、聚丙烯酰胺、煤质颗粒活性炭、蜂窝活性炭、氧化铁脱硫剂、石英砂滤料、无烟煤滤料、生物陶粒滤料、天然海砂滤料、纤维球滤料、锰砂滤料、免焊接斜板填料、斜板填料、蜂窝斜管填料、侧向流斜板填料、絮凝网格填料、固定床平板填料、混凝土滤板、ABS整体浇筑滤板、S型滤砖、T型滤砖、活性炭翻板滤池U型滤管、可调节式长柄滤头
- 主营：聚合氯化铝、聚合硫酸铁、活性炭、聚丙烯酰胺、乙酸钠、阻垢剂、消泡剂、葡萄糖、水处理药剂、滤料
- 主营：聚丙烯酰胺、絮凝剂
- 主营：聚丙烯酰胺
- 主营：聚丙烯酰胺、阳离子聚丙烯酰胺、阴离子聚丙烯酰胺、非离子聚丙烯酰胺
- 主营：[]
- 主营：活性炭、高效水处理药剂、PAM、聚丙烯酰胺、阴离子聚丙烯酰胺、阳离子聚丙烯酰胺、非离子聚丙烯酰胺、两性离子聚丙烯酰胺、净水絮凝剂、椰壳活性炭、柱状活性炭、粉末活性炭、活性吸附炭、净水滤炭
- 主营：羧甲基淀粉、黄原胶、瓜尔胶、聚丙烯酰胺、阴离子聚丙烯酰胺、羧甲基纤维素、预糊化淀粉、吸水树脂、农林保水剂、抑尘剂、聚阴离子纤维素、型煤粘合剂、SAP吸水树脂、改性玉米粉、抑尘固化剂、饲料用预糊化淀粉、羧甲基变性淀粉、陶瓷用纤维素、抗旱保水剂
- 主营：聚丙烯酰胺、污泥脱水
- 主营：聚丙烯酰胺、聚合氯化铝、葡萄糖、循环水药剂
- 主营：黄原胶、羧甲基纤维素、羧甲基淀粉、聚丙烯酰胺、抑尘剂、型煤粘合剂、聚阴离子纤维素、农林保水剂、预糊化淀粉、吸水树脂、瓜尔胶
- 主营：黄原胶、羧甲基淀粉、羧甲基纤维素、聚丙烯酰胺、预糊化淀粉、抑尘剂、聚阴离子纤维素、吸水树脂、农林保水剂、型煤粘合剂、瓜尔胶
- 主营：酸洗抑雾剂、生物菌种、污水处理菌种、聚丙烯酰胺、除磷剂、氨氮去除剂、COD去除剂、重金属捕捉剂、脱色剂、小苏打、碳酸氢钠、硫酸亚铁、融雪剂、阻垢剂、聚合氯化铝、纯碱、消泡剂、复合碳源、杀菌灭藻剂、聚合硫酸铁、石灰
- 主营：聚丙烯酰胺、净水材料、水处理药剂
- 主营：絮凝剂、碳源、除磷剂、聚丙烯酰胺、生物碳源、污水处理、聚合氯化铝、消泡剂、高分子材料、除臭剂、滤料、活性炭、微生物菌种、葡萄糖
- 主营：除臭剂、氨氮去除剂、COD处理剂、聚丙烯酰胺、总氮去除剂、除磷剂、污水处理、水处理药剂、聚合氯化铝、破乳剂、脱色剂、絮凝剂、混凝剂、重金属捕捉剂、污水菌种、污水处理药剂、除铜剂
- 主营：聚丙烯酰胺、聚合氯化铝
- 主营：阳离子聚丙烯酰胺、水处理填料
- 主营：阴离子聚丙烯酰胺、总氮去除剂、超磁分离磁种