Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

MCP6547-E/MS

Updated: 2026-07-21

Overview

The MCP6547-E/MS is a low-power comparator manufactured by Microchip Technology, designed for precision voltage comparison applications. It features a push-pull output stage, eliminating the need for an external pull-up resistor, and operates over a wide voltage range from 1.6V to 5.5V. This component is particularly suitable for battery-powered devices due to its ultra-low quiescent current (typically 1.6μA). The MCP6547-E/MS comes in a small MSOP-8 package, making it ideal for space-constrained applications in consumer electronics, industrial controls, and automotive systems.

Structure and Working Principle

STPS3045CG-TR 整流二极管 ST 封装TO-263-2 批次21+深圳市芯巴巴科技有限公司

The MCP6547-E/MS consists of a differential input stage, a comparator circuit, and a push-pull output stage. The differential inputs compare two voltage signals, with the output switching between high and low states based on which input is at a higher potential. The push-pull output configuration provides both sinking and sourcing capability, allowing direct drive of both high and low logic levels without additional components. This architecture enables rail-to-rail output swing, ensuring maximum signal integrity even at low supply voltages.

商家经验真实案例 · 安全可信
存储器的分类与作用
本文系统介绍存储器的分类、特点及其在不同场景中的作用,帮助读者理解各类存储器的适用场景和技术差异,为工业采购提供参考依据。

Key Features

Key specifications include an ultra-low quiescent current of 1.6μA (typical), making it suitable for battery-operated devices. The device offers a propagation delay of approximately 8μs with 5mV overdrive, balancing speed with power efficiency. The comparator features rail-to-rail input capability, allowing it to process signals across the entire supply voltage range. With a typical input offset voltage of ±3mV, it provides good accuracy for most general-purpose comparison applications.

Application Areas

Primary applications include battery monitoring systems, where the comparator detects low-voltage conditions. It's also widely used in window comparators for power supply monitoring and in analog-to-digital converter front-ends. Industrial applications include sensor interfaces, threshold detection in process control systems, and general-purpose signal conditioning. In consumer electronics, it finds use in portable devices for power management and signal processing tasks.

Maintenance and Precautions

MKE04Z8VTG4R 电子元器件 安世 封装NA 批次23+深圳市永怡佳科技有限公司

When handling the MCP6547-E/MS, observe standard ESD precautions as with all CMOS devices. Storage should be in anti-static packaging at room temperature with controlled humidity. In circuit design, ensure the input voltage does not exceed the supply rails by more than 300mV to prevent latch-up. For noisy environments, consider adding small bypass capacitors near the power supply pins to improve stability.

商家经验真实案例 · 安全可信
PM传感器故障处理
本文详细介绍了PM传感器常见故障的排查与处理方法,包括初步检查、信号诊断和校准维护三个关键步骤,帮助用户快速恢复传感器正常功能。

B2B Procurement Guide

When sourcing the MCP6547-E/MS, verify the manufacturer part number suffix to ensure correct package type (MSOP-8). Lead times typically range from 4-8 weeks for standard orders, though some distributors may stock limited quantities. For large volume purchases (1,000+ units), prices typically range from $0.50 to $0.80 per unit. Consider requesting samples for prototype verification before committing to large orders. Always purchase from authorized distributors to ensure genuine Microchip products.

Related Manufacturers