Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

MBR10200

Updated: 2026-08-05

Overview

The MBR10200 is a schottky barrier rectifier diode designed for high-efficiency power conversion applications. Schottky diodes are known for their low forward voltage drop (typically 0.55V at 10A) and fast switching characteristics compared to standard PN junction diodes. These properties make the MBR10200 particularly suitable for switch-mode power supplies (SMPS), DC-DC converters, and reverse polarity protection circuits where energy efficiency and thermal performance are critical. The device is commonly available in industry-standard packages like TO-220 and D2PAK.

Structure and Working Principle

MCC 整流二极管 MBR10200CT TO-220AB 原厂供应 21+深圳市捷佳讯科技有限公司

The MBR10200 utilizes a metal-semiconductor junction (typically platinum-silicon) rather than a conventional P-N junction. This schottky barrier creates a lower potential barrier for electron flow, enabling faster switching speeds and reduced forward voltage drop. Internally, the diode features an epitaxial construction with guard rings to enhance voltage blocking capability. The 200V reverse voltage rating is achieved through careful control of the semiconductor doping profile and junction geometry. The device's thermal characteristics are optimized through copper leadframes in power packages.

商家经验真实案例 · 安全可信
绿色发光二极管压降
本文解析绿色发光二极管(LED)的典型压降范围,解释不同材料和波长对压降的影响,并对比常见LED颜色的电压特性差异,帮助读者理解LED选型的基础参数。

Key Features

With a maximum average forward current of 10A and peak surge current capability up to 150A, the MBR10200 handles substantial power levels while maintaining efficiency. The typical forward voltage of 0.55V at rated current represents significantly lower conduction losses than conventional diodes. The fast recovery time (<50ns) minimizes switching losses in high-frequency applications. The device's operating junction temperature range of -65°C to +175°C makes it suitable for demanding environments. Package options include through-hole (TO-220) and surface-mount (D2PAK) variants for different PCB assembly requirements.

Application Areas

Primary applications include switch-mode power supplies (particularly output rectification stages), DC-DC converters in telecom and computing equipment, and reverse polarity protection in automotive/marine systems. The MBR10200's characteristics make it ideal for solar panel bypass diodes and battery charging circuits. In industrial settings, these diodes are commonly used in motor drive circuits, welding equipment, and UPS systems. The fast switching capability also makes them suitable for high-frequency pulse power applications such as RF amplifiers and pulse generators.

Maintenance and Precautions

CRYX品牌MBR10200肖特基二极管200V 10A TO-220高频整流低功耗深圳源芯半导体有限公司

Proper heat sinking is critical when operating near maximum current ratings. The thermal resistance junction-to-case (RθJC) of 3°C/W means that without adequate cooling, the diode can quickly exceed safe operating temperatures. Designers should ensure the operating reverse voltage does not exceed the 200V rating, including any transient spikes. In parallel configurations, current sharing resistors may be needed due to the negative temperature coefficient of forward voltage. Always follow ESD precautions during handling and assembly.

商家经验真实案例 · 安全可信
微波炉高压二极管
本文详细解析微波炉高压二极管的工作原理、常见故障及更换注意事项,帮助读者全面了解这一关键元件的作用与维护方法。

B2B Procurement Guide

When sourcing MBR10200 diodes, verify manufacturer certifications (especially for automotive or military applications). Major manufacturers include ON Semiconductor, Vishay, and STMicroelectronics. Lead times typically range from 2-8 weeks for standard orders. For high-volume procurement (10,000+ units), prices often drop below $0.40 per unit. Consider requesting samples for thermal performance testing before large orders. Verify packaging specifications (tape-and-reel for SMD versions) and RoHS compliance status based on your market requirements.

Related Manufacturers