Aicaigou LogoB2B Wiki

MAX809LTRG

Updated: 2026-09-13

Overview

The MAX809LTRG is a widely used microprocessor reset circuit manufactured by Maxim Integrated. It is designed to monitor system power supplies and ensure reliable operation of microprocessors by generating a reset signal during power-up, power-down, or brownout conditions. The device is particularly valued for its low quiescent current, which makes it suitable for battery-powered and portable applications. The MAX809LTRG comes in a compact SOT-23 package, making it ideal for space-constrained designs. It offers precise voltage monitoring with factory-set reset thresholds, ensuring consistent performance across different units. Its simplicity and reliability have made it a popular choice in embedded systems, industrial controls, and consumer electronics.

Structure and Working Principle

The MAX809LTRG consists of a voltage comparator, a reference voltage source, and an output driver. The comparator continuously monitors the supply voltage (VCC) against an internal reference. If VCC falls below the preset threshold, the output driver asserts a reset signal to the microprocessor, ensuring a controlled shutdown or restart. The device operates with a very low quiescent current, typically around 5µA, which minimizes power consumption in standby modes. The reset signal remains active until VCC rises above the threshold and stabilizes for a minimum delay period, typically 140ms. This ensures that the microprocessor starts only when the power supply is stable.

Key Features

The MAX809LTRG offers several key features that make it stand out in its category. Its low quiescent current (5µA typical) is a significant advantage for battery-powered applications, extending battery life. The device also provides precise voltage monitoring with factory-set thresholds, eliminating the need for external components or calibration. Another notable feature is its compact SOT-23 package, which saves board space in densely packed designs. The MAX809LTRG is available with various reset threshold voltages (e.g., 2.63V, 3.08V, 4.38V), allowing designers to select the optimal version for their specific application. Additionally, it operates over a wide temperature range (-40°C to +85°C), making it suitable for harsh environments.

Application Areas

The MAX809LTRG is commonly used in applications where reliable microprocessor operation is critical. It is frequently found in embedded systems, such as industrial controllers, automotive electronics, and medical devices, where power supply stability is essential. Portable and battery-powered devices, such as handheld instruments, IoT sensors, and wearable technology, also benefit from the MAX809LTRG's low power consumption. Consumer electronics, including smart home devices and gaming consoles, often incorporate this reset circuit to ensure smooth operation during power transitions. Its versatility and reliability make it a go-to solution for many design engineers.

Maintenance and Precautions

To ensure optimal performance of the MAX809LTRG, designers should adhere to recommended operating conditions. The device should not be exposed to voltages exceeding its maximum ratings, as this could lead to permanent damage. Proper PCB layout practices, such as minimizing trace lengths and avoiding noise sources, are also important. For long-term reliability, it is advisable to protect the device from excessive moisture and mechanical stress. Storage conditions should be within the specified temperature and humidity ranges. Regular testing during the design phase can help verify that the reset circuit functions as intended under all expected operating conditions.

B2B Procurement Guide

When procuring the MAX809LTRG in bulk, it is essential to verify the authenticity of the components, as counterfeit parts can compromise system reliability. Purchasing from authorized distributors or directly from the manufacturer is recommended. Lead times and minimum order quantities (MOQs) can vary, so it is advisable to plan procurement well in advance. Pricing typically decreases with larger order volumes, but exact costs depend on market conditions and supplier agreements. Designers should also confirm that the selected reset threshold voltage matches their application requirements before placing orders.

Related Manufacturers