Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

MAX7317AEE

Updated: 2026-08-03

Overview

The MAX7317AEE is a 16-bit input/output (I/O) port expander in a QSOP-16 package that communicates via the I²C serial interface. Manufactured by Maxim Integrated (now part of Analog Devices), this IC provides a cost-effective solution for expanding the GPIO capabilities of microcontrollers and embedded processors. Designed for industrial and commercial applications, the MAX7317AEE operates across a wide voltage range (2.3V to 5.5V) and features programmable polarity for flexible input configuration. Its compact form factor makes it ideal for space-constrained designs requiring additional I/O lines.

Structure and Working Principle

MMBZ15VALT1G MC74VHC4316DTG MC100H680FNG MJE802G LB1843V-TLM-E深圳市友智联科技有限公司

The MAX7317AEE consists of 16 bidirectional I/O pins that can be individually configured as inputs or outputs through I²C commands. Each I/O pin includes a programmable pull-up resistor and polarity control register for input sensing. The device operates as an I²C slave with a 7-bit address (configurable via hardware pins) and supports standard (100kHz) and fast (400kHz) modes. An interrupt output pin alerts the host microcontroller when any configured input changes state, reducing the need for continuous polling.

商家经验真实案例 · 安全可信
电源芯片3810替代方案
本文探讨电源芯片3810的替代选择,分析兼容型号的关键参数匹配原则,并提供实际替换时的注意事项,帮助工程师快速找到合适方案。

Key Features

The MAX7317AEE offers several notable features including programmable I/O direction (per pin), interrupt generation on input change, and software reset capability. The IC's wide operating voltage range makes it compatible with both 3.3V and 5V systems. Additional features include low standby current (typically 1μA), thermal shutdown protection, and robust ESD protection (≥15kV HBM). The device maintains output latch-up performance up to 300mA, making it suitable for driving LEDs and small relays directly.

Application Areas

Primary applications include industrial control systems, embedded computing platforms, and consumer electronics where GPIO expansion is needed. Typical implementations include control panel interfaces, sensor arrays, and LED matrix drivers. In automotive electronics, the MAX7317AEE finds use in climate control systems and dashboard lighting controls. Its robust design also makes it suitable for building automation systems, particularly in applications requiring multiple discrete inputs or outputs.

Maintenance and Precautions

LT3033IUDC#PBF 电子元器件 AD 封装QFN-20 批次21+深圳市博亿诚科技有限公司

The MAX7317AEE requires minimal maintenance in normal operation. Designers should ensure proper decoupling capacitors are placed near the power pins (0.1μF ceramic recommended) and observe maximum voltage ratings. For reliability, avoid exceeding the maximum junction temperature (150°C) and implement proper PCB layout techniques to minimize noise on the I²C lines. When handling, follow standard ESD precautions as the device contains MOS structures sensitive to static discharge.

商家经验真实案例 · 安全可信
5060ti和5070性能差多少
本文对比分析5060ti与5070、5070ti的性能差异,从核心参数到实际应用场景,帮助读者清晰了解不同型号间的性能差距及适用场景。

B2B Procurement Guide

When sourcing the MAX7317AEE, verify the manufacturer (Maxim/Analog Devices) and part number suffix to ensure correct package type (AEE denotes QSOP-16). Consider purchasing from authorized distributors to guarantee authenticity. Lead times typically range from 4-8 weeks for standard orders. For high-volume purchases (1,000+ units), negotiate pricing directly with distributors or manufacturer representatives. Evaluation kits (MAX7317EVKIT) are available for prototyping and testing purposes.

Related Manufacturers