Aicaigou LogoB2B WikiIndustrial Encyclopedia

MAX5075AAUA+T

Updated: 2026-08-20

Overview

The MAX5075AAUA+T is a synchronous buck (step-down) DC-DC converter IC manufactured by Maxim Integrated (now part of Analog Devices). It is designed to provide efficient power conversion in demanding environments, making it suitable for industrial automation, automotive systems, and telecommunications equipment. This IC integrates high-side and low-side MOSFETs, reducing external component count and board space. Its wide 4.5V to 76V input voltage range accommodates various power sources, including automotive batteries and industrial power buses. The device delivers up to 2.5A of output current with high efficiency across the operating range.

Structure and Working Principle

MAX5075AAUA+T 电子元器件 MAXIM美信 封装UMAX8 批号26+深圳市中芯巨能电子有限公司

The MAX5075AAUA+T operates as a current-mode PWM controller with synchronous rectification. It uses an internal oscillator with adjustable frequency (100kHz to 1MHz) to regulate the output voltage through pulse-width modulation of the integrated power MOSFETs. The IC incorporates several protection features including thermal shutdown, overcurrent protection, and undervoltage lockout. The feedback loop maintains stable output voltage by comparing a fraction of the output with an internal reference voltage (adjustable through external resistors). The device comes in a 8-pin μMAX package (3mm x 3mm) for space-constrained applications.

商家经验真实案例 · 安全可信
天普芯科什么档次
本文从技术实力、市场定位和产品特性三个维度解析天普芯科的行业定位,帮助读者客观理解其在半导体领域的实际水平与竞争优势。

Key Features

The MAX5075AAUA+T stands out for its combination of high voltage capability and integration. The wide input range allows direct operation from automotive batteries (including cold-crank conditions) and industrial power supplies without additional pre-regulation. Key technical features include 90% typical efficiency, adjustable soft-start to limit inrush current, and a power-good output signal. The device supports both forced-PWM and pulse-skipping modes, allowing optimization for either lowest noise or highest light-load efficiency. The integrated MOSFETs have low RDS(ON) values (100mΩ high-side, 70mΩ low-side) to minimize conduction losses.

Application Areas

Primary applications include industrial control systems, automotive electronics, and telecom infrastructure equipment where reliable power conversion from high voltage sources is required. Typical uses include powering microcontrollers, sensors, and communication modules in harsh environments. In automotive systems, the IC is suitable for infotainment systems, advanced driver assistance systems (ADAS), and body control modules. Industrial applications include factory automation, motor control, and process instrumentation. The wide temperature range (-40°C to +125°C) makes it appropriate for outdoor and high-reliability applications.

Maintenance and Precautions

MAX5075AAUA+T 集成电路(IC) MAXIM 封装MSOP8 批次24+深圳市华本天成电子有限公司

Proper PCB layout is critical for optimal performance of the MAX5075AAUA+T. The IC requires a low-ESR input capacitor close to the VIN pin, and the power ground should be separated from the signal ground with a single-point connection. Thermal management is important when operating at high ambient temperatures or maximum load current. The exposed pad on the package bottom must be soldered to a copper pour on the PCB for heat dissipation. Input voltage transients should stay within the absolute maximum ratings to prevent damage. Follow ESD precautions during handling and assembly.

商家经验真实案例 · 安全可信
直流降压原理
本文用生活化比喻解析直流降压的核心原理,包括电阻分压、开关斩波和线性稳压三种典型方案,并比较其适用场景与效率差异。

B2B Procurement Guide

When sourcing the MAX5075AAUA+T, verify authenticity by purchasing through authorized distributors like Arrow, Avnet, or Digi-Key. Consider lead times which can vary based on market conditions, especially for automotive-grade components. Evaluate alternative part numbers (such as the MAX5075B with different default switching frequency) if flexibility is needed. For high-volume applications, consult the manufacturer for pricing tiers and potential alternatives with similar specifications. Check for compliance with relevant industry standards (AEC-Q100 for automotive applications) if required.

Related Manufacturers