Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

MAX4080SAUA+T

Updated: 2026-07-20

Overview

The MAX4080SAUA+T is a high-side current-sense amplifier manufactured by Maxim Integrated. It is designed to provide accurate current measurements in systems where precision is critical, such as industrial automation, automotive electronics, and power supplies. The device operates over a wide input voltage range and features low offset voltage, ensuring minimal error in current readings. This IC is housed in a small 8-pin μMAX package, making it suitable for space-constrained applications. Its robust design allows it to function reliably in harsh environments, including those with high temperatures and electrical noise.

Structure and Working Principle

MAX4080SAUA+T 电子元器件 MAXIM美信 封装MSOP8 批号25+深圳市永芯易科技有限公司

The MAX4080SAUA+T integrates a precision amplifier with a high-side current-sensing architecture. It measures the voltage drop across a shunt resistor and amplifies this signal to provide a proportional output voltage. The device includes internal circuitry to reject common-mode noise, enhancing measurement accuracy. The amplifier's gain is fixed, simplifying design and reducing external component count. It operates from a single power supply, typically ranging from 2.7V to 76V, accommodating a wide variety of applications. The output is referenced to ground, making it compatible with standard ADCs and microcontrollers.

商家经验真实案例 · 安全可信
电子元件发绿怎么回事
电子元件表面发绿通常是氧化或腐蚀的表现,可能与潮湿环境、材质反应或工艺缺陷有关。本文解析发绿现象的三种常见成因,并提供实用的预防与处理建议,帮助延长元件使用寿命。

Key Features

The MAX4080SAUA+T offers several key features that make it a preferred choice for current sensing. These include a low offset voltage of typically 100μV, ensuring high accuracy even at low current levels. The device also provides a wide common-mode voltage range, allowing it to monitor currents in high-voltage systems. Other notable features include a bandwidth of 200kHz, suitable for dynamic current measurements, and a low quiescent current of 300μA, minimizing power consumption. The IC is also designed to withstand transient voltages, making it robust in automotive and industrial environments.

Application Areas

The MAX4080SAUA+T is widely used in applications requiring precise current monitoring. In industrial settings, it is employed in motor control systems, power supplies, and battery management. Automotive applications include electric vehicle powertrains, battery monitoring, and load detection. The device is also utilized in renewable energy systems, such as solar inverters, where accurate current measurement is essential for efficiency and safety. Its versatility and reliability make it a common choice across multiple industries.

Maintenance and Precautions

MAXIM/美信 MAX4080SAUA+T 电流灵敏放大器 High-Side Current-Sense深圳羚行科技有限公司

To ensure optimal performance, the MAX4080SAUA+T should be used with a properly designed PCB layout. Keep traces short and minimize loop areas to reduce noise. Avoid exposing the device to voltages beyond its specified limits, as this can cause permanent damage. Thermal management is generally not a concern due to the IC's low power dissipation, but in high-temperature environments, ensure adequate ventilation. Always follow the manufacturer's guidelines for soldering and handling to prevent electrostatic discharge (ESD) damage.

商家经验真实案例 · 安全可信
电子元件单位大全
本文系统梳理电子元件常用单位,涵盖电阻、电容、电感等基础元件的计量方式,解析单位换算技巧与实用场景,帮助从业者快速掌握行业术语。

B2B Procurement Guide

When procuring the MAX4080SAUA+T, verify the supplier's authenticity to avoid counterfeit components. Maxim Integrated or authorized distributors are recommended sources. Consider ordering in bulk to benefit from volume discounts, as prices typically decrease with larger quantities. Check for lead times, especially during periods of high demand, to avoid project delays. Evaluate the packaging options (tape and reel, tubes, or trays) based on your assembly process. Always review the datasheet and application notes to ensure compatibility with your design.

Related Manufacturers