Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

MAX3485E

Updated: 2026-07-29

Overview

The MAX3485ESA+ is a 3.3V-powered RS-485/RS-422 transceiver manufactured by Maxim Integrated (now part of Analog Devices). This 8-pin SOIC device enables robust serial communication over long distances (up to 1200 meters) in electrically noisy environments. It serves as an interface between microcontroller logic levels and differential RS-485/RS-422 networks commonly used in industrial automation, building control systems, and instrumentation. The IC features a half-duplex communication architecture with driver enable and receiver enable control pins. It's particularly valued for its ±15kV ESD protection on bus pins, which enhances reliability in harsh industrial environments. The device operates with a single 3.3V supply while maintaining compatibility with 5V logic inputs.

Structure and Working Principle

MAX3485ESA SOP8 15+  电子元器件 other/其他 规格书 数据手册深圳市金胜达微科技有限公司

The MAX3485ESA+ integrates a differential line driver and receiver in a single package. The driver converts TTL/CMOS logic signals from a microcontroller into balanced differential signals for transmission over twisted-pair cables. The receiver converts incoming differential signals back to single-ended logic levels. Key internal components include a slew-rate limited driver (reducing EMI), fail-safe circuitry (ensures known output state when inputs are floating), and thermal shutdown protection. The device implements RS-485 standard compliant differential signaling with a minimum 1.5V output differential voltage when loaded with 54Ω, supporting communication with up to 32 unit loads on a single bus.

商家经验真实案例 · 安全可信
a105800k和a106700区别
本文详细对比a105800k和a106700两款工业产品的核心差异,从性能参数、适用场景到维护特点,帮助用户快速理解两者区别并做出合理选择。

Key Features

The MAX3485ESA+ offers several distinctive features that make it suitable for industrial applications. Its low-power shutdown mode (consuming just 0.1μA typical) is valuable for battery-powered devices. The IC operates across the industrial temperature range (-40°C to +85°C), ensuring reliability in challenging environments. Notable specifications include a 10Mbps maximum data rate, ±15kV human body model ESD protection on bus pins, and a 1/8 unit load receiver input impedance (allowing up to 256 devices on a bus). The device also features reduced slew rates to minimize EMI and reflections in unterminated or improperly terminated networks.

Application Areas

This transceiver finds extensive use in industrial automation systems including PLCs, motor controls, and sensor networks. It's commonly implemented in building automation for HVAC control, lighting systems, and security equipment. The device is also employed in professional audio/video equipment and telecommunications infrastructure. Other applications include utility meter reading systems, renewable energy monitoring (solar/wind farms), and transportation systems (railway signaling, vehicle diagnostics). The IC's robustness makes it suitable for oil/gas field equipment and other harsh environment installations where electrical noise and voltage transients are common.

Maintenance and Precautions

CD74ACT04M 电子元器件 HVCA PDF 资料 规格书 数据手册深圳市金胜达微科技有限公司

Proper installation is crucial for reliable operation. Always use twisted-pair cabling for differential signals and implement proper termination (typically 120Ω resistors) at both ends of the bus. Avoid stubs in the network topology as they can cause signal reflections. For ESD protection, ensure proper grounding of equipment chassis and consider additional transient voltage suppressors in high-risk environments. When designing PCB layouts, maintain proper spacing between data lines and other signals to minimize crosstalk. Regularly inspect connectors and cables for damage in industrial installations.

商家经验真实案例 · 安全可信
a358gr347是什么材质
本文解析a358gr347的材质特性、常见应用场景及选择建议,帮助读者全面了解这一工业材料的性能与适用性。

B2B Procurement Guide

When sourcing MAX3485ESA+ in bulk, verify authenticity through authorized distributors like Arrow, Avnet, or Digi-Key to avoid counterfeit components. Consider lead times (typically 6-8 weeks for large orders) and minimum order quantities (often 1000 units for best pricing). Evaluate alternative packaging options (TSSOP, SOIC) if space constraints exist in your application. For long-term projects, check Analog Devices' product longevity forecasts, as industrial-grade ICs typically have extended availability. Request samples for testing before large-scale procurement to verify compatibility with your specific application requirements.

Related Manufacturers