Aicaigou LogoB2B WikiIndustrial Encyclopedia

MAX3051EKA+

Updated: 2026-07-15

Overview

The MAX3051EKA+ is a high-performance CAN transceiver IC manufactured by Maxim Integrated (now part of Analog Devices). It facilitates communication between controllers and devices in Controller Area Network (CAN) systems, widely used in automotive and industrial settings. Designed for robustness, it supports data rates up to 5Mbps and integrates enhanced ESD protection (±25kV), making it suitable for electrically noisy environments. Its compact 8-pin SOIC package ensures space efficiency in PCB designs.

Structure and Working Principle

MAX3051EKA+T 电子元器件 MAXIM 封装SOT-23-8 批次24+深圳市新思汇科技有限公司

The MAX3051EKA+ consists of a differential transmitter and receiver pair, conforming to the ISO 11898-2 standard for high-speed CAN. It converts digital signals from a CAN controller into differential bus signals and vice versa. Its integrated failsafe features ensure a logic-high output when the bus is idle or shorted, preventing data corruption. The device operates from a single +5V supply and includes thermal shutdown protection to safeguard against overheating.

商家经验真实案例 · 安全可信
可控硅短接两脚导通
本文解析可控硅短接哪两个脚可以直接导通,介绍可控硅的基本结构和工作原理,并提供操作时的注意事项,帮助读者安全有效地进行相关操作。

Key Features

1. **High-Speed Operation**: Supports CAN FD (Flexible Data Rate) for modern automotive networks. 2. **Low-Power Modes**: Features standby and sleep modes to reduce energy consumption in battery-operated systems. 3. **Robustness**: ±25kV ESD protection on bus pins exceeds automotive requirements (ISO 10605). These features make it a preferred choice for applications demanding reliability under extreme conditions, such as electric vehicles and factory automation.

Application Areas

The MAX3051EKA+ is deployed in: - **Automotive**: ECU communication, battery management systems (BMS), and diagnostic ports. - **Industrial**: PLCs, robotics, and sensor networks requiring noise immunity. Its compliance with AEC-Q100 standards ensures suitability for automotive-grade designs, while industrial users benefit from its wide temperature range (−40°C to +125°C).

Maintenance and Precautions

MAX3051EKA+T CAN收发器 代理电子元器件,可提供降本增效方案深圳市暮今电子科技有限公司

To ensure longevity: 1. Avoid exceeding the maximum supply voltage (5.5V). 2. Implement proper bus termination (120Ω resistors) to prevent signal reflections. For PCB layout, minimize trace lengths between the transceiver and CAN controller. Use ground planes to reduce EMI. Regularly inspect for physical damage in high-vibration environments.

商家经验真实案例 · 安全可信
蓝牙5.4和6.0接收器区别
本文从传输速率、功耗表现和兼容性三个维度对比蓝牙5.4和6.0接收器的核心差异,解析新一代蓝牙技术如何提升无线音频体验。

B2B Procurement Guide

When sourcing the MAX3051EKA+: 1. **Certifications**: Verify suppliers provide automotive-grade (AEC-Q100) components if needed. 2. **Packaging**: Tape-and-reel options are available for automated assembly. 3. **Alternatives**: Compare with Texas Instruments’ TCAN332 or NXP’s TJA1051 for cost-performance trade-offs. Lead times vary; consider stocking agreements for high-volume projects. Pricing typically decreases for orders above 1,000 units.

Related Manufacturers