Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

MAX17220ELT+T

Updated: 2026-08-06

Overview

The MAX17220ELT+T is a highly integrated step-down DC-DC converter designed by Maxim Integrated. It is particularly suited for portable and battery-powered applications due to its ultra-low quiescent current and high efficiency. The device operates over a wide input voltage range, making it versatile for various power management needs. With its compact size and minimal external component requirements, the MAX17220ELT+T is ideal for space-constrained designs. It incorporates advanced features such as pulse-frequency modulation (PFM) for improved efficiency at light loads, and automatic switchover between PFM and pulse-width modulation (PWM) modes.

Structure and Working Principle

ADI MAX17220ELT+T UDFN-6(2x2) DC-DC 电源芯片深圳市捷佳讯科技有限公司

The MAX17220ELT+T integrates a synchronous buck converter with power MOSFETs, a control circuit, and protection features in a single chip. It converts a higher input voltage to a lower, regulated output voltage with high efficiency. The device uses a constant-on-time control scheme to maintain regulation across varying load conditions. During operation, the internal control logic adjusts the switching frequency and duty cycle to maintain the desired output voltage. The converter automatically transitions between PFM mode at light loads for better efficiency and PWM mode at heavier loads for improved output regulation.

商家经验真实案例 · 安全可信
商用台式集成电路
本文探讨商用台式集成电路的特点、应用场景及选购考量,帮助读者理解其在工业领域的核心价值与适用性,为采购决策提供实用参考。

Key Features

One of the standout features of the MAX17220ELT+T is its ultra-low quiescent current of just 300nA, which significantly extends battery life in portable applications. The device offers high efficiency across a wide load range, typically up to 95%, thanks to its advanced control architecture. The converter also includes comprehensive protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout. Its small 6-pin TDFN package (1.5mm × 1.0mm) makes it suitable for compact designs where board space is at a premium.

Application Areas

The MAX17220ELT+T finds extensive use in battery-powered IoT devices, wearable electronics, and portable medical equipment. Its low power consumption makes it particularly valuable for applications where extended battery life is critical. Other common applications include power management in smartphones, tablets, and digital cameras. The device's wide input voltage range (2.5V to 5.5V) and adjustable output voltage (0.8V to 3.3V) make it adaptable to various system requirements.

Maintenance and Precautions

MAX17220ELT+T 集成电路(IC) UDFN-6(2x2) 兼容性好 工作温度深圳市卓芯电子有限公司

When implementing the MAX17220ELT+T, proper PCB layout is crucial for optimal performance. Keep the input and output capacitors close to the device, and use a ground plane for thermal management and noise reduction. Ensure adequate clearance between sensitive analog components and high-current paths. The device's thermal performance should be verified under maximum load conditions. While the built-in thermal shutdown provides protection, sustained operation near the temperature limit may affect reliability. For applications with stringent EMI requirements, additional filtering may be necessary.

商家经验真实案例 · 安全可信
泰兴预售电源模块
本文探讨泰兴地区电源模块预售的市场动态与选购要点,分析工业级电源模块的核心性能指标及适配场景,为采购决策提供实用参考。

B2B Procurement Guide

When sourcing the MAX17220ELT+T, verify the supply chain authenticity as counterfeit components are a concern in the semiconductor industry. Consider purchasing directly from authorized distributors or the manufacturer for guaranteed quality. Evaluate your volume requirements as pricing tiers typically apply. For prototype quantities, sample purchases may be available through distributor programs. Lead times can vary, especially during industry shortages, so plan procurement accordingly for production schedules.

Related Manufacturers