Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

MAX1697UEUT+T

Updated: 2026-08-05

Overview

The MAX1697UEUT+T is a high-performance, step-down DC-DC converter from Maxim Integrated, designed for demanding automotive and industrial environments. It integrates a synchronous rectifier to achieve high efficiency, reducing power loss and heat generation. The device operates over a wide input voltage range (4V to 40V), making it suitable for applications with fluctuating power sources, such as automotive battery systems. This IC is particularly valued for its low quiescent current (typically 40µA), which minimizes power consumption in standby or light-load conditions. Its compact 6-pin SOT23 package makes it an excellent choice for space-constrained designs, while its robust design ensures reliable operation in harsh environments.

Structure and Working Principle

MAX1697UEUT+T 电子元器件 MAXIM 封装N/A 批次21+深圳市芯诚惠电子有限公司

The MAX1697UEUT+T employs a synchronous buck converter topology, which uses two internal MOSFETs (high-side and low-side) to efficiently step down the input voltage. The high-side MOSFET switches the input voltage to an LC filter, while the low-side MOSFET provides a path for inductor current during the off-time. This synchronous operation significantly reduces power loss compared to traditional diode-based designs. The device features a fixed-frequency PWM control scheme (typically 500kHz), which simplifies output filter design and reduces output voltage ripple. It includes internal soft-start to limit inrush current during startup, protecting both the converter and the load. The output voltage is adjustable via an external resistor divider, providing flexibility for various applications.

商家经验真实案例 · 安全可信
RFID射频网
本文探讨RFID射频网的核心原理与应用场景,解析其如何通过无线电波实现非接触式数据交换,并分析在工业环境中的部署要点与常见挑战。

Key Features

The MAX1697UEUT+T offers several notable features that make it stand out in its class. Its wide 4V to 40V input range covers most automotive and industrial voltage requirements, including cold-crank and load-dump conditions. The high efficiency (up to 94%) reduces power dissipation, allowing for smaller heatsinks or none at all in many applications. Other important features include a low shutdown current (0.1µA typical), thermal shutdown protection, and cycle-by-cycle current limiting for robust operation. The device maintains regulation with ceramic output capacitors, ensuring stable performance and reducing bill-of-materials costs. Its -40°C to +125°C operating temperature range makes it suitable for harsh environments.

Application Areas

The MAX1697UEUT+T is widely used in automotive electronics, particularly in infotainment systems, instrument clusters, and advanced driver assistance systems (ADAS). Its ability to handle automotive transients and wide temperature ranges makes it ideal for these applications. The low quiescent current is especially valuable for always-on systems that must minimize battery drain. In industrial settings, this converter powers sensors, actuators, and control systems in factory automation equipment. It's also found in telecommunications infrastructure, test and measurement instruments, and portable medical devices. The compact size and high efficiency make it popular in battery-powered applications where space and energy are at a premium.

Maintenance and Precautions

MAX1697UEUT+T 电子元器件 MAXIM 封装1842 批次19+深圳市齐森电子有限公司

Proper handling and application of the MAX1697UEUT+T are crucial for reliable operation. Always observe ESD precautions when handling the device, as the small package size makes it susceptible to electrostatic discharge damage. Ensure adequate PCB copper area for heat dissipation, especially when operating at high ambient temperatures or near maximum load currents. Input and output capacitors should be selected carefully to meet the device's requirements for stability and transient response. The input capacitor should be placed as close as possible to the VIN and GND pins to minimize high-frequency loop area. Layout should follow the manufacturer's recommendations to avoid noise coupling and ensure proper operation.

商家经验真实案例 · 安全可信
jbf52s02控制器技术参数
本文详细解析jbf52s02控制器的核心参数特性,包括硬件配置、功能模块及适用场景,帮助用户全面了解该设备的性能特点与应用价值。

B2B Procurement Guide

When sourcing the MAX1697UEUT+T, verify the manufacturer's part number and package marking to ensure authenticity. Counterfeit components are a significant concern in the semiconductor industry. Purchase from authorized distributors or directly from Maxim Integrated to guarantee genuine parts. Consider lead time and minimum order quantities when planning production. For prototype quantities, sample requests may be available through manufacturer programs. Volume pricing typically applies for orders above 1,000 units. Evaluate alternative parts with similar specifications if supply chain issues arise, but always verify compatibility through thorough testing.

Related Manufacturers