Aicaigou LogoB2B WikiIndustrial Encyclopedia

MAX14891EATP+T

Updated: 2026-08-03

Overview

The MAX14891EATP+T is a high-performance RS-485/RS-422 transceiver manufactured by Maxim Integrated. It is designed for industrial communication systems where reliability and noise immunity are critical. The device supports data rates up to 20Mbps and operates over a wide supply voltage range of 3V to 5.5V, making it versatile for various applications. Its robust design includes ±15kV ESD protection on the bus pins, ensuring durability in harsh environments. The transceiver also features low electromagnetic interference (EMI), which is essential for compliance with industrial standards. These characteristics make the MAX14891EATP+T a preferred choice for factory automation, process control, and other demanding applications.

Structure and Working Principle

TQP3M9038 集成电路(IC) Qorvo 封装16-QFN 批次25+深圳市华睿芯科技有限公司

The MAX14891EATP+T integrates a driver and receiver for full-duplex communication. The driver converts logic-level signals into differential signals suitable for RS-485/RS-422 networks, while the receiver translates differential signals back into logic levels. The device includes internal fail-safe circuitry to ensure a logic-high output when the bus is idle or shorted. Power is supplied through a single 3V to 5.5V source, simplifying system design. The transceiver's low-power mode reduces current consumption when not actively transmitting, making it energy-efficient. Thermal shutdown protection is also included to prevent damage from excessive heat, enhancing reliability in high-temperature environments.

商家经验真实案例 · 安全可信
IP23防水等级解析
本文用生活化比喻解释IP23防护等级的真实含义,揭秘两个数字背后的防水防尘能力差异,并说明其适用场景与局限性,帮助读者快速掌握工业设备防护常识。

Key Features

The MAX14891EATP+T stands out for its high-speed performance, supporting data rates up to 20Mbps. This makes it suitable for time-sensitive industrial applications. The device's wide supply voltage range (3V to 5.5V) allows integration into diverse systems without requiring additional voltage regulation. Another notable feature is its robust ESD protection, with ±15kV on the bus pins. This ensures the transceiver can withstand electrostatic discharges common in industrial settings. Additionally, the low EMI design minimizes interference with other electronic components, complying with stringent industrial emission standards.

Application Areas

The MAX14891EATP+T is widely used in industrial automation, including programmable logic controllers (PLCs), motor control systems, and sensor networks. Its reliability and noise immunity make it ideal for factory floors and other electrically noisy environments. Other applications include building automation, security systems, and renewable energy systems like solar inverters. The transceiver's ability to operate over long cable lengths (up to 1200 meters) further extends its utility in large-scale installations, such as oil and gas pipelines or water treatment facilities.

Maintenance and Precautions

SDIN7DU2-8G-1210 电子元器件 SANDISK 封装NA 批次23+深圳市华来深电子有限公司

To ensure optimal performance, the MAX14891EATP+T should be handled with proper ESD precautions, such as using grounded wrist straps and anti-static mats. Power supply voltages must remain within the specified range (3V to 5.5V) to avoid damage. Regular inspection of communication lines for shorts or breaks is recommended, as these can degrade signal integrity. The device's thermal shutdown feature protects against overheating, but adequate ventilation should still be maintained in enclosed spaces. Firmware updates for connected controllers may also be necessary to address compatibility issues.

商家经验真实案例 · 安全可信
M.2 2280 NVMe PCIe4.0×4 SSD
本文解析M.2 2280 NVMe PCIe4.0×4固态硬盘的性能特点、适用场景及选购要点,帮助用户理解其高速传输优势与硬件兼容性需求。

B2B Procurement Guide

When procuring the MAX14891EATP+T, verify the supplier's authenticity to avoid counterfeit components. Authorized distributors like Digi-Key or Mouser are reliable sources. Bulk purchases typically offer cost savings, with prices ranging approximately $2.50 to $4.00 per unit. Check the device's date code to ensure fresh inventory, as prolonged shelf life can affect performance. Lead times may vary, so plan orders in advance for large projects. Technical support and datasheets should be readily available from the supplier to assist with integration challenges.

Related Manufacturers