Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

MAX13485EESA+T

Updated: 2026-08-05

Overview

The MAX13485EESA+T is a half-duplex RS-485/RS-422 transceiver designed by Maxim Integrated, a leader in analog and mixed-signal solutions. It is widely used in industrial and automotive applications due to its reliability, low power consumption, and robust performance in noisy environments. The device supports data rates up to 250kbps and operates over a wide supply voltage range, making it versatile for various communication systems. The transceiver is housed in an 8-pin SOIC package, which is compact and suitable for space-constrained applications. Its integrated features, such as fail-safe biasing and thermal shutdown, enhance system reliability and longevity. The MAX13485EESA+T is a preferred choice for engineers seeking a balance between performance and cost-effectiveness.

Structure and Working Principle

MAX13485EESA+T 电子元器件 Maxim Integrated 封装SOP8深圳市芯锐华科技有限公司

The MAX13485EESA+T consists of a transmitter and receiver pair, enabling half-duplex communication. The transmitter converts logic-level signals into differential RS-485/RS-422 signals, while the receiver converts differential signals back to logic levels. The device includes internal slew rate limiting to reduce EMI and improve signal integrity. The transceiver operates on a single 3V to 5.5V supply, making it compatible with a wide range of microcontrollers and processors. It features high input impedance, allowing multiple devices to share a common bus without significant signal degradation. The integrated ESD protection safeguards the device from electrostatic discharges, ensuring durability in harsh environments.

商家经验真实案例 · 安全可信
贴片电容0805是什么
本文详细解析贴片电容0805的尺寸含义、常见应用场景以及与其他规格的对比特点,帮助读者快速理解这一电子元件的核心参数与实际价值。

Key Features

The MAX13485EESA+T offers several standout features, including a wide operating voltage range (3V to 5.5V), which provides flexibility in various power supply configurations. Its low quiescent current (typically 300µA) makes it ideal for battery-powered applications. The device also includes fail-safe biasing, ensuring a known output state when inputs are open or shorted. Robust ESD protection (±15kV) enhances the transceiver's reliability in industrial and automotive settings. The small SOIC-8 package saves board space, while the extended temperature range (-40°C to +125°C) ensures performance under extreme conditions. These features collectively make the MAX13485EESA+T a reliable choice for demanding applications.

Application Areas

The MAX13485EESA+T is commonly used in industrial automation systems, where reliable long-distance communication is critical. It is employed in programmable logic controllers (PLCs), motor control systems, and sensor networks. The transceiver's robustness makes it suitable for harsh industrial environments with high noise levels. In the automotive sector, the device is used in vehicle communication networks, such as CAN bus systems and infotainment networks. Its compliance with AEC-Q100 standards ensures reliability in automotive applications. Additionally, the MAX13485EESA+T is used in building automation, security systems, and other applications requiring robust serial communication.

Maintenance and Precautions

原装MAX13485EESA+T 电子元器件 MAXIM美信 封装SOP8 批号26+深圳市中芯巨能电子有限公司

To ensure optimal performance, the MAX13485EESA+T should be operated within its specified voltage and temperature ranges. Proper grounding and decoupling are essential to minimize noise and signal interference. Avoid exposing the device to electrostatic discharge (ESD) by following standard ESD handling procedures during installation and maintenance. Regular inspection of the communication lines for damage or corrosion is recommended, especially in industrial environments. If the transceiver is used in high-temperature applications, ensure adequate heat dissipation to prevent thermal shutdown. Following these precautions will extend the device's lifespan and maintain reliable operation.

商家经验真实案例 · 安全可信
模拟IC设计流程
本文详细介绍了模拟IC设计的完整流程,从规格定义到最终验证,逐步解析每个关键环节,帮助读者理解模拟IC设计的核心步骤和技术要点。

B2B Procurement Guide

When procuring the MAX13485EESA+T, verify the supplier's authenticity to avoid counterfeit products. Reputable distributors and authorized resellers are recommended. Check for compliance with industry standards, such as AEC-Q100 for automotive applications, if required. Consider purchasing in bulk to benefit from volume discounts, but ensure the components are stored in anti-static packaging to prevent damage. Evaluate the supplier's lead times and inventory levels to avoid delays in production. Request samples for testing before large-scale procurement to confirm compatibility with your system.

Related Manufacturers