Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

MAX13085EESA+

Updated: 2026-07-17

Overview

The MAX13085EESA+ is a high-performance RS-485/RS-422 transceiver IC manufactured by Maxim Integrated. This device is specifically designed for industrial communication systems that require reliable data transmission over long distances. It operates with a wide supply voltage range of 3V to 5.5V, making it compatible with various industrial power systems. The transceiver supports data rates up to 25Mbps, enabling high-speed communication in automation and control applications. Its small 8-pin SOIC package offers space efficiency while maintaining robust performance. The MAX13085EESA+ is particularly valued for its excellent ESD protection (up to ±15kV) and failsafe receiver inputs that ensure proper operation in noisy industrial environments.

Structure and Working Principle

MAX13085EESA RS-485/RS-422芯片 ADI亚德诺/MAXIM美信 SOP-8 25/26+深圳市芯锐华科技有限公司

The MAX13085EESA+ integrates both a driver and receiver in a single chip, facilitating half-duplex communication. The driver section converts TTL/CMOS logic levels to differential RS-485 signals, while the receiver converts differential signals back to logic levels. The device features thermal shutdown protection that activates when junction temperature exceeds safe limits. Internally, the IC includes slew-rate limited drivers to reduce EMI and improve signal integrity. The receiver input impedance is typically 96kΩ, allowing up to 256 transceivers on a single bus. The failsafe circuitry ensures a logic-high output when inputs are open, shorted, or terminated but not driven, preventing communication errors in industrial networks.

商家经验真实案例 · 安全可信
小分子合成工厂
本文探讨小分子合成工厂的核心价值、技术优势及行业应用场景,解析其如何通过模块化设计和精准工艺控制,满足医药研发与精细化工领域的定制化需求。

Key Features

The MAX13085EESA+ stands out for its robust ESD protection, with ±15kV protection on the bus pins (human body model). This makes it exceptionally durable in industrial environments where electrostatic discharge is common. The device consumes only 300µA of supply current when unloaded, significantly lower than many competing transceivers. Another notable feature is its wide common-mode voltage range (-7V to +12V), which allows reliable communication in the presence of ground potential differences between network nodes. The transceiver also features a low-current shutdown mode (0.1µA typical) for power-sensitive applications. These characteristics combine to make the MAX13085EESA+ a preferred choice for industrial automation systems.

Application Areas

The MAX13085EESA+ is widely used in industrial automation systems, including PLCs (Programmable Logic Controllers), motor control systems, and industrial sensors. Its robust design makes it suitable for harsh environments found in manufacturing plants and process control facilities. Beyond industrial automation, this transceiver is employed in building automation systems for HVAC control, security systems, and lighting control networks. It's also found in instrumentation systems, medical equipment, and telecommunications infrastructure where reliable data transmission is critical. The device's wide temperature range (-40°C to +85°C) ensures operation in extreme conditions common to these applications.

Maintenance and Precautions

MAX13085EESA+T 电子元器件 MAXIM/ADI 封装SOP8 批次新年份深圳市华芝杰电子有限公司

Proper PCB layout is crucial when using the MAX13085EESA+. Keep signal traces short and matched in length for differential pairs to maintain signal integrity. Adequate power supply decoupling (typically 0.1µF ceramic capacitor near the VCC pin) is essential for stable operation. In high-temperature environments, ensure proper thermal management through adequate PCB copper area or heat sinking if necessary. Avoid exposing the device to voltages beyond its absolute maximum ratings, especially on the bus pins. When designing the network, proper termination (typically 120Ω at each end of the bus) is necessary to prevent signal reflections that can degrade communication reliability.

商家经验真实案例 · 安全可信
贴片电容0805是什么
本文详细解析贴片电容0805的尺寸含义、常见应用场景以及与其他规格的对比特点,帮助读者快速理解这一电子元件的核心参数与实际价值。

B2B Procurement Guide

When procuring MAX13085EESA+ ICs for industrial applications, verify the supplier's authenticity as counterfeit components are a concern in the semiconductor market. Authorized distributors typically offer better reliability and technical support. Consider ordering samples for testing before large-volume purchases. For industrial projects, evaluate the device's performance under your specific environmental conditions, particularly regarding temperature extremes and electrical noise. Lead time can vary (commonly 6-8 weeks for large orders), so plan procurement accordingly. Some suppliers offer value-added services like programming or testing that may benefit your production process. Always check for the latest revision of the datasheet as specifications may change over time.

Related Manufacturers