Overview
Matte UV coating is a radiation-curable polymer applied as a liquid and hardened using ultraviolet light. Unlike glossy finishes, it diffuses light to create a soft, non-reflective surface. It is widely adopted in industries where aesthetic appeal and durability are prioritized. The coating consists of oligomers, monomers, photoinitiators, and matting agents. The matting effect is achieved through additives like silica or wax, which disrupt surface smoothness. UV curing ensures rapid processing, making it suitable for high-volume production lines.
Physical and Chemical Properties
Matte UV coatings exhibit a typical viscosity of 500–2000 cP at 25°C, allowing easy application via spray, roller, or curtain coating. After curing, they achieve a pencil hardness of 2H–4H and a gloss range of 10–30 GU (60° angle). Chemically, these coatings resist solvents, water, and mild acids once cured. Their adhesion varies by substrate—optimized formulations exist for plastics, metals, and wood. The absence of volatile organic compounds (VOCs) during curing aligns with environmental regulations.
Main Applications
In furniture manufacturing, matte UV coatings protect surfaces like MDF and hardwood while maintaining a natural look. Electronics manufacturers use them for bezels and touch panels to reduce glare. The automotive sector applies these coatings to interior trims and dashboards. Packaging industries leverage their fast curing for luxury boxes and labels, where tactile appeal is critical. Specialty formulations are also used in artistic prints and decorative laminates.
Safety and Storage
Uncured matte UV coatings may contain acrylates, which can irritate skin and eyes. Proper PPE—gloves, goggles, and respirators—is essential during handling. Ensure workspaces are well-ventilated to avoid vapor accumulation. Storage requires opaque containers at 15–25°C to prevent premature curing. Avoid contamination with water or incompatible solvents. Shelf life depends on formulation but typically ranges from 6 to 12 months.
B2B Procurement Guide
Buyers should specify gloss level, substrate compatibility, and cure speed (e.g., under 5 seconds with 300–400 nm UV lamps). Request technical datasheets for hardness, adhesion, and chemical resistance metrics. Bulk procurement (200+ kg) often reduces costs by 10–20%. Partner with suppliers offering custom formulations for niche applications. Verify compliance with REACH or FDA standards if needed for food-contact surfaces.
Related Manufacturers
- 主营：异辛醇、乳化剂、乙烯醚、醚羧酸、脂肪醇、分散剂、染色助剂、聚乙二醇、异构醇醚、泊洛沙姆、椰油酰胺、基羟乙基、烷基糖苷、特辛基酚、聚氧乙烯、嵌段聚醚、单油酸酯、异构十三醇、丙烯磺酸钠、氢化蓖麻油、丙烯酰胺基、醇醚葡糖苷、低泡渗透剂、甲酯乙氧基、癸基葡糖苷
- 主营：合成树脂、固化剂、不饱和树脂、哑光粉YT、环氧树脂、聚酯多元醇、酚醛树脂、医药中间体
- 主营：UV光固涂料、氟碳面漆
- 主营：哑光漆、白底漆、家具漆、聚氨酯漆
- 主营：地板漆、地板水性漆、水性色浆染料、uv漆、油性色浆染料、木地板油漆
- 主营：Q-lab老化箱、紫外老化箱、氙灯老化箱、盐雾试验箱、析塔表面清洁度仪、涂魔师测厚仪、taber磨耗测试仪
- 主营：功能型添加剂、手感弹性树脂、抗涂鸦树脂、哑光树脂、双重固化树脂、准分子树脂、羟基丙烯酸树脂、UV胶粘剂树脂、UV转移胶树脂、膜材加硬液
- 主营：哑光剂2105、润滑剂、尼龙增韧剂
- 主营：固化剂、表面处理剂、无机矿物颜填料、氨基硅烷偶联剂
- 主营：表面活性剂、十六碳二酸、防锈添加剂、椰油醇醚硫酸钠、二硬脂酸乙烯酯
- 主营：环氧树脂、乙烯基树脂、丙烯酸树脂、消光粉、炭黑、钛白粉、色粉、聚乙烯醇、抗氧剂、成膜助剂、固化剂、硅油、抗静电剂、润湿分散剂、消泡剂、光紫外线吸收剂、氯化聚丙烯树脂
- 主营：功能型光固化UV树脂、功能型添加剂、手感弹性树脂、哑光树脂、抗涂鸦树脂、双重固化树脂、耐钢丝绒树脂、准分子树脂、羟基丙烯酸树脂、UV胶粘剂、UV转移胶、膜材加硬液
- 主营：改性POM、增韧剂、改性尼龙、哑光粉、耐磨POM、增韧POM、玻纤增强POM、POM工程塑料、阻燃PC、防火PC、消音POM、聚甲醛、阻燃PC+ABS、消光粉
- 主营：哑光粉、固化剂、油漆
- 主营：美缝剂、脱泡剂、分散剂、UV涂料哑光粉YT、除水剂、溶剂txma、杀菌剂、银助剂、含羧基、蜡乳液、添加量、高温杀、防沉剂、催化剂、清洗液、efka-4010、防流剂、eep溶剂、shytb6058、防白水、防绿剂、流挂剂、羟乙基、流变剂、白炭黑、efka助剂