Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

LZT

Updated: 2026-08-02

Overview

Lead Zirconate Titanate (LZT or PZT) is a perovskite-type piezoelectric ceramic material developed in the 1950s. As a solid solution of lead zirconate (PbZrO3) and lead titanate (PbTiO3), it exhibits superior piezoelectric properties compared to single-component materials. The material's performance can be precisely tuned by adjusting the Zr/Ti ratio, typically ranging from 52/48 to 58/42 for optimal piezoelectric response. LZT ceramics are manufactured through powder processing and high-temperature sintering (1200-1300°C). The polycrystalline structure requires electrical poling to align ferroelectric domains. Modern varieties often include dopants like lanthanum (soft doping) or iron (hard doping) to modify electrical and mechanical properties for specific applications.

Physical and Chemical Properties

低频电磁辐射仪LZT-1000 手持式辐射检测仪 场强仪青岛路博建业环保科技有限公司

LZT ceramics demonstrate remarkable electromechanical coupling, with piezoelectric coefficients (d33) ranging from 300-600 pC/N depending on composition and processing. The relative dielectric constant typically falls between 500-4000, with Curie temperatures of 200-400°C that determine maximum operating temperatures. Mechanically, LZT has a Young's modulus of about 60-80 GPa and exhibits brittleness typical of ceramics. The material shows excellent stability against aging when properly processed, with minimal property degradation over time. Chemically, it is inert to most solvents but may degrade in strong acids or bases, particularly those that attack lead compounds.

商家经验真实案例 · 安全可信
激光器没有红光
本文解析工业激光器红光指示失效的常见原因,包括电源模块异常、光学组件故障及操作设置问题,并提供基础排查方法帮助快速定位问题。

Main Applications

The largest application of LZT is in ultrasonic transducers for medical imaging (70% of market) and industrial NDT. These exploit the material's ability to efficiently convert electrical signals to mechanical vibrations at MHz frequencies. In consumer electronics, LZT ceramics power buzzer elements in watches and phones, while automotive applications include fuel injectors and knock sensors. Military/aerospace uses include sonar projectors and vibration damping systems. Emerging applications include energy harvesting from mechanical vibrations and precision positioning systems for semiconductor manufacturing. The material's pyroelectric properties also enable infrared detection in security and thermal imaging systems.

Safety and Storage

KA431LZTA 电压基准IC ON/安森美 封装TO-92 批次22+2南京宁之海电子科技有限公司

As a lead-containing material, LZT requires careful handling to prevent lead exposure. Processing should occur in controlled environments with proper ventilation and personal protective equipment (gloves, respirators). Unpoled ceramics pose minimal risk, but poled components may contain high voltages that require electrical safety precautions. Storage recommendations include keeping materials in sealed containers to prevent moisture absorption (which can affect electrical properties) and contamination from dust. Bulk ceramics should be protected from mechanical shock during transportation to prevent cracking. End-of-life disposal must comply with local regulations for lead-containing materials, with recycling preferred where possible.

商家经验真实案例 · 安全可信
inp激光器是什么
本文解析INP激光器的核心特性与应用场景,从半导体材料特性到工业加工优势,揭秘这一特殊激光器如何实现高精度与高稳定性的完美结合。

B2B Procurement Guide

When sourcing LZT materials, buyers should clearly specify: 1) Zr/Ti ratio (e.g., 53/47 for general purpose), 2) dopant types and concentrations, 3) required piezoelectric/ dielectric properties, 4) dimensional tolerances, and 5) poling requirements. Standard shapes include disks, plates, rings and custom geometries through machining or green-state forming. Quality control parameters should include density measurements (>95% theoretical), dielectric loss testing (<2%), and piezoelectric coefficient verification. For high-reliability applications, request certified test data including aging characteristics. Lead-free alternatives (e.g., KNN-based ceramics) may be considered where RoHS compliance is mandatory, though with performance trade-offs.

Related Manufacturers