Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

lvc8t245

Updated: 2026-08-06

Overview

The LVC8T245 is a bidirectional voltage level translator integrated circuit designed for digital systems operating at different logic levels. It belongs to the LVC (Low-Voltage CMOS) family of devices, known for their robust performance in mixed-voltage environments. This IC is particularly useful in systems where microcontrollers, FPGAs, or other digital components operate at different voltage levels (e.g., 1.8V, 3.3V, or 5V). The LVC8T245 enables seamless communication between these components while maintaining signal integrity and preventing voltage mismatch issues.

Structure and Working Principle

SN74LVC8T245DBQR 转换器,电平移位器 TI 封装24-QSOP 批次24+深圳市新思汇科技有限公司

The LVC8T245 consists of eight bidirectional translation channels, each capable of converting signals between two voltage domains. A direction control pin (DIR) determines the data flow direction for all channels simultaneously. Internally, the device uses a pass-gate architecture with built-in voltage level detection. When translating from a lower to higher voltage, the output drivers are powered by the higher supply voltage (VCCB). For the reverse direction, the drivers use the lower supply voltage (VCCA). Automatic direction sensing is not supported - the direction must be explicitly controlled.

商家经验真实案例 · 安全可信
控制器最多能控制多少
本文解析海湾控制器的控制容量,包括其设计原理、典型应用场景及扩展能力,帮助用户了解如何根据需求选择合适的控制器配置。

Key Features

The LVC8T245 offers several notable features including wide voltage translation ranges (typically 1.2V to 5.5V), high-speed operation (up to 100Mbps), and very low standby current consumption. Additional features include power-off protection (I/O pins are high impedance when power is removed), 24mA output drive capability, and bus-hold inputs on the A-side ports. These characteristics make the device suitable for both portable battery-operated applications and industrial systems requiring robust signal translation.

Application Areas

This voltage level translator finds extensive use in various digital systems including microcontroller interfaces, memory systems, and communication buses. It's commonly employed in SPI, I2C, and parallel bus interfaces. Industrial applications include PLCs, motor controllers, and sensor interfaces. Consumer applications range from smartphones and tablets to digital cameras and gaming consoles. The device is also widely used in embedded systems and IoT devices where multiple voltage domains coexist.

Maintenance and Precautions

SN74LVC8T245PWR TI德州仪器 电平转换器 集成电路(IC)现货在售上海云汉天启电子科技有限公司

Proper handling of the LVC8T245 requires ESD precautions during installation and operation. The device should be stored in anti-static packaging when not in use. Design considerations include proper power supply sequencing (VCCA should be ≤ VCCB), adequate decoupling capacitors near power pins, and attention to signal integrity for high-speed applications. The DIR pin should not be left floating and must be properly driven to a valid logic level.

商家经验真实案例 · 安全可信
蓝芽接收器选型指南
本文探讨如何选择适合的蓝牙接收器,包括关键性能指标、使用场景适配及性价比考量,帮助读者做出明智决策。

B2B Procurement Guide

When procuring LVC8T245 ICs in bulk, verify the manufacturer's authenticity and request full datasheet specifications. Key parameters to confirm include voltage range compatibility, operating temperature range, and package type. For high-reliability applications, consider automotive-grade or industrial-grade variants. Lead time and minimum order quantities vary by supplier, with typical MOQs starting at 1,000 pieces for standard commercial-grade parts. Price breaks typically occur at 10,000 and 50,000 unit quantities.

Related Manufacturers