LT3980EDE

Overview

The LT3980EDE is a monolithic, high-efficiency step-down switching regulator manufactured by Analog Devices. It is designed to deliver up to 1.5A of continuous output current with input voltages ranging from 4V to 36V. The device operates at a fixed switching frequency of 2.2MHz, allowing for the use of small external components. This regulator is particularly suited for harsh environments due to its robust design and wide operating temperature range (-40°C to +125°C). It includes features such as soft-start, current limiting, and thermal shutdown, making it a reliable choice for demanding applications.

Structure and Working Principle

LT3973IDD-3.3#PBF 电子元器件 ADI/亚德诺封装Tray 批号2023

深圳市华来深电子有限公司

The LT3980EDE integrates a high-side P-channel MOSFET switch and utilizes a constant frequency, current mode architecture. The regulator maintains high efficiency across a wide load range by reducing switching losses and optimizing gate drive. When the internal oscillator turns on the power switch, current flows through the inductor to the output capacitor and load. The feedback loop adjusts the duty cycle to maintain the desired output voltage, even with varying input voltages or load conditions. The device's low dropout capability allows it to regulate the output even when the input voltage approaches the output voltage.

商家经验真实案例 · 安全可信

监视器主机

本文探讨监视器主机的核心功能、应用场景及选购要点，帮助读者全面了解这一设备在工业监控系统中的关键作用与性能特点。

Key Features

Key features of the LT3980EDE include its 2.2MHz switching frequency, which enables the use of compact inductors and capacitors. The device offers high efficiency (up to 95%) and low quiescent current (40μA) in shutdown mode. The regulator also provides excellent line and load regulation, with typical output voltage accuracy of ±2%. Additional protections include reverse-battery protection, overcurrent protection, and thermal shutdown, making it suitable for automotive applications where reliability is critical.

Application Areas

The LT3980EDE is widely used in industrial control systems, automotive electronics, and telecommunications equipment. Its ability to operate from a wide input voltage range makes it ideal for battery-powered applications and systems with unstable power sources. In automotive applications, the regulator powers infotainment systems, LED lighting, and sensors. Industrial uses include factory automation, test and measurement equipment, and distributed power systems where space and efficiency are important considerations.

Maintenance and Precautions

深圳市煜芯城科技有限公司

Proper PCB layout is crucial for optimal performance of the LT3980EDE. The input and output capacitors should be placed close to the device to minimize parasitic inductance. Adequate copper area should be allocated for heat dissipation, especially in high ambient temperature environments. When designing with this regulator, pay special attention to the selection of external components. The inductor should have low DC resistance to minimize power loss, and the output capacitor should have low ESR for stable operation. Always refer to the manufacturer's datasheet for detailed layout guidelines.

商家经验真实案例 · 安全可信

AD9826国产替代型号全解析

本文解析AD9826国产替代型号，包括性能对比、选型要点及实际应用场景，帮助工程师快速找到合适替代方案，避免选型踩坑。

B2B Procurement Guide

When procuring the LT3980EDE in bulk, consider working directly with authorized distributors or the manufacturer to ensure genuine components. Volume pricing typically becomes competitive for orders above 1,000 units. Lead times can vary depending on market demand, so plan procurement well in advance for critical projects. For prototype quantities, many distributors offer sample programs. Verify the package type (e.g., DFN-10) matches your design requirements before placing orders.