Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

LT3680HMSE#PBF

Updated: 2026-07-24

Overview

The LT3680HMSE#PBF is a step-down (buck) switching regulator IC manufactured by Analog Devices. It is designed to deliver high efficiency and reliable performance in demanding environments such as industrial automation, automotive electronics, and telecommunications infrastructure. This regulator operates over a wide input voltage range (3.6V to 36V) and can deliver output currents up to 2.1A. Its compact MSOP-16 package makes it suitable for space-constrained applications while maintaining excellent thermal characteristics.

Structure and Working Principle

LT3680HMSE#PBF 电子元器件 ADI/亚德诺 封装Tape Reel 批号2023深圳市华来深电子有限公司

The LT3680HMSE#PBF integrates a high-frequency switching controller, power MOSFETs, and control circuitry in a single package. It employs a current-mode architecture that provides fast transient response and stable operation across varying load conditions. During operation, the internal switch turns on to store energy in an inductor, then turns off to transfer that energy to the output. The duty cycle is automatically adjusted to maintain the desired output voltage regardless of input voltage or load changes. Feedback through an external resistor divider ensures precise voltage regulation.

商家经验真实案例 · 安全可信
三极管放大镜
本文探讨三极管放大镜的应用场景和工作原理,解析其在电子维修和检测中的实际作用,并分享使用技巧和注意事项。

Key Features

The device offers several notable features including a low 40μA quiescent current in standby mode, making it suitable for battery-powered applications. The switching frequency can be programmed from 200kHz to 2.4MHz to optimize efficiency or reduce component size. Built-in protection features include thermal shutdown, current limiting, and reverse-battery protection. The regulator maintains high efficiency (up to 94%) across a wide load range through its Burst Mode operation, which minimizes switching losses at light loads.

Application Areas

Primary applications include industrial control systems where stable power is required for sensors, PLCs, and motor controllers. In automotive electronics, it powers infotainment systems, ADAS components, and lighting modules. The regulator is also widely used in telecommunications equipment, particularly for powering FPGAs, ASICs, and RF modules in base stations and networking hardware. Its wide input range makes it suitable for both 12V/24V vehicle systems and 5V/12V/24V industrial power buses.

Maintenance and Precautions

LT3680HMSE#PBF 电子元器件 ADI/亚德诺 封装Tape Reel 批次2023海芯未来半导体电子(深圳)有限公司

Proper PCB layout is critical for optimal performance. Place input capacitors close to the VIN and GND pins, and use a ground plane for thermal management. Ensure adequate airflow or heat sinking when operating at maximum load currents. Avoid exceeding the absolute maximum ratings, particularly the 40V input voltage limit. When designing for automotive applications, consider additional transient voltage protection as the IC alone may not withstand load dump events.

商家经验真实案例 · 安全可信
btk3048a引脚参数
本文详细解析btk3048a的引脚参数,包括引脚功能定义、电压范围及连接建议,帮助工程师快速掌握该元器件的硬件设计要点。

B2B Procurement Guide

When procuring the LT3680HMSE#PBF, verify the manufacturer's part number and package (MSOP-16) to ensure compatibility. Lead times can vary, so plan purchases in advance for production schedules. Consider purchasing from authorized distributors to guarantee authenticity, as counterfeit components are a known issue in the semiconductor market. For high-volume orders (1,000+ units), negotiate pricing with suppliers as significant discounts are typically available.

Related Manufacturers