Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

LT3471

Updated: 2026-07-15

Overview

The LT3471 is a monolithic step-up DC/DC converter specifically engineered for driving white LEDs or other constant current loads. Manufactured by Analog Devices, it integrates a high-efficiency switching regulator with a precision current sense amplifier. This IC is widely used in backlighting applications for LCD displays, automotive lighting systems, and industrial instrumentation due to its compact design and reliable performance. The device operates from an input voltage range of 2.5V to 16V, making it suitable for various power sources.

Structure and Working Principle

LT3471EDD#TRPBF 集成电路、处理器、微控制器 ADI 封装DFN 批次21+雅创芯城(深圳)供应链有限公司

The LT3471 combines a current-mode PWM controller with a power switch capable of handling up to 36V output. The internal architecture includes a reference voltage source, oscillator, error amplifier, and current comparator. When enabled, the device regulates current through an external sense resistor, adjusting the switching duty cycle to maintain constant current regardless of input voltage fluctuations or LED forward voltage variations. The switching frequency (200kHz to 2MHz) can be adjusted using an external resistor.

商家经验真实案例 · 安全可信
分频器相位差调整
本文解析分频器相位差的调整方法,涵盖基础概念、调整步骤及常见问题处理,帮助读者掌握精准调校技巧,提升音频系统表现。

Key Features

The LT3471 offers several notable features including up to 95% conversion efficiency, which significantly reduces power dissipation in space-constrained applications. Its True Color PWM dimming capability provides 3000:1 dimming ratio without color shift. The device includes built-in protection features such as open LED detection and thermal shutdown. The adjustable soft-start function prevents excessive inrush current during startup, while the synchronous rectification topology enhances efficiency compared to traditional diode-based designs.

Application Areas

Primary applications include white LED backlighting for medium-sized LCD panels in industrial equipment, automotive interior lighting, and avionics displays. The constant current regulation makes it suitable for driving LED arrays in architectural lighting. Secondary applications encompass general-purpose step-up conversion where precise current control is required, such as in laboratory equipment or battery-powered medical devices. The wide input voltage range allows operation from single-cell Li-ion batteries or 12V automotive systems.

Maintenance and Precautions

LT3471EDD#PBF 集成电路(IC) ADI 封装DFN-10 批次24+深圳市新思汇科技有限公司

Proper PCB layout is critical for optimal performance - place input capacitors close to the VIN and GND pins, and minimize trace lengths for the switch node. Adequate copper area should be allocated for heat dissipation, especially when operating at maximum load. ESD precautions must be observed during handling. The device should be stored in anti-static packaging when not in use. For continuous operation near maximum ratings, consider adding a small heatsink or increasing airflow to maintain junction temperature below 125°C.

商家经验真实案例 · 安全可信
陀螺仪测试工具
本文探讨陀螺仪测试工具的核心功能与应用场景,解析其精度验证的关键技术,并分享实际使用中的注意事项,帮助读者全面了解这一专业设备的实用价值。

B2B Procurement Guide

When procuring LT3471 ICs, verify authenticity through authorized distributors like Arrow Electronics or Avnet to avoid counterfeit components. Minimum order quantities typically range from 100 to 1000 units for commercial purchases. For prototype quantities, consider sample requests directly from Analog Devices or their distribution partners. Lead times vary from stock availability to 8-12 weeks for large orders. Pricing tiers generally start at around $5.00 per unit for small quantities, decreasing to approximately $3.50 for volume purchases above 1000 units.

Related Manufacturers