Aicaigou LogoB2B Wiki

LT1764AET#PBF

Updated: 2026-08-29

Overview

The LT1764AET#PBF is a high-performance low-dropout (LDO) linear voltage regulator produced by Analog Devices. It is designed to provide stable and efficient voltage regulation in a wide range of electronic applications. The regulator is known for its low noise output, making it ideal for sensitive analog and digital circuits. Its compact surface-mount package (TO-220) allows for easy integration into space-constrained designs. The LT1764AET#PBF is widely used in industrial, telecommunications, and automotive systems where reliable power management is critical. With a dropout voltage as low as 300mV, it ensures efficient operation even when the input voltage is close to the output voltage. This feature, combined with its low quiescent current, makes it a popular choice for battery-powered devices.

Structure and Working Principle

The LT1764AET#PBF consists of a precision voltage reference, error amplifier, and a pass transistor. The voltage reference provides a stable voltage, which the error amplifier compares to the output voltage. Any discrepancy between the two voltages results in an adjustment of the pass transistor's conductivity to maintain the desired output voltage. The regulator operates by dissipating excess power as heat, which is why thermal management is crucial. The device includes built-in thermal shutdown and current limit protection to prevent damage under extreme conditions. Its internal circuitry ensures minimal output voltage variation across varying load and temperature conditions, providing consistent performance.

Key Features

One of the standout features of the LT1764AET#PBF is its low dropout voltage, which allows it to regulate output voltage even when the input voltage is only slightly higher than the desired output. This makes it highly efficient in battery-operated applications. Additionally, the regulator offers low noise performance, typically below 20µV RMS, which is essential for RF and precision analog circuits. Another key feature is its high accuracy, with output voltage tolerance as tight as ±1%. The device also supports a wide input voltage range (up to 20V) and provides adjustable output voltage via external resistors. Its robust design includes reverse-battery protection and thermal overload protection, ensuring longevity and reliability in harsh environments.

Application Areas

The LT1764AET#PBF is commonly used in industrial control systems, where stable voltage regulation is necessary for sensitive sensors and actuators. Its low noise characteristics make it suitable for telecommunications equipment, such as base stations and RF modules, where signal integrity is paramount. In the automotive sector, the regulator is employed in infotainment systems, engine control units, and other electronic components requiring reliable power. It is also found in medical devices, portable electronics, and instrumentation, where precision and efficiency are critical. The device's versatility and performance make it a go-to solution for engineers across various industries.

Maintenance and Precautions

To ensure optimal performance and longevity of the LT1764AET#PBF, proper thermal management is essential. Adequate heat sinking should be provided, especially in high-current applications, to prevent thermal shutdown. The device should be operated within its specified input voltage and current limits to avoid damage. Care should be taken to avoid reverse polarity connections, as this can permanently damage the regulator. Additionally, the use of input and output capacitors, as recommended in the datasheet, is crucial for stability and noise reduction. Regular inspection of solder joints and connections is advised to maintain reliable operation over time.

B2B Procurement Guide

When procuring the LT1764AET#PBF in bulk for B2B applications, it is important to verify the authenticity of the parts to avoid counterfeit products. Purchasing from authorized distributors or directly from Analog Devices is recommended. Volume discounts may be available, so negotiating with suppliers for larger orders can lead to cost savings. Lead times should be considered, especially for time-sensitive projects, as availability can vary. It is also advisable to review the latest datasheet for any updates or revisions to specifications. For custom requirements, such as specific packaging or testing, direct communication with the manufacturer may be necessary.

Related Manufacturers