Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

LPS33HWTR

Updated: 2026-07-15

Overview

The LPS33HWTR is a MEMS-based absolute pressure sensor developed for demanding industrial and consumer applications. Manufactured using advanced piezoresistive technology, it provides highly accurate pressure measurements while withstanding challenging environmental conditions. This sensor stands out for its robust packaging that meets IPx8 waterproof standards, making it suitable for applications exposed to moisture or dust. Its compact 2.5mm × 2.5mm footprint allows integration into space-constrained designs without compromising performance.

Structure and Working Principle

LPS33HWTR 集成电路(IC) ST意法 封装CCLGA10 批次25+深圳市中芯巨能电子有限公司

The LPS33HWTR consists of a MEMS pressure sensing element and an ASIC interface chip in a single package. The sensing element uses piezoresistors that change resistance when deformed by applied pressure, converting mechanical stress into electrical signals. The integrated ASIC provides temperature compensation and digitizes the analog signal, delivering calibrated pressure data through I2C or SPI interfaces. This digital output simplifies integration with microcontrollers while maintaining high resolution (24-bit pressure data) across the full measurement range.

商家经验真实案例 · 安全可信
先导基电与存储芯片关系
本文探讨先导基电与存储芯片之间的关联,分析其在半导体制造中的相互作用及技术协同,帮助理解两者在产业链中的定位与价值。

Key Features

The LPS33HWTR offers a pressure measurement range of 260-1260 hPa with ±0.5 hPa absolute accuracy. Its low power consumption (3 μA in low-power mode) makes it ideal for battery-powered applications. Notable features include embedded temperature compensation, FIFO buffer for data storage, and interrupt functions that alert the host system to significant pressure changes. The sensor maintains stable performance across a wide temperature range (-40°C to +85°C), ensuring reliability in diverse operating environments.

Application Areas

This sensor is widely used in industrial equipment for pressure monitoring and leak detection. Automotive applications include tire pressure monitoring systems and engine management. In consumer electronics, the LPS33HWTR enables altitude tracking in smartwatches and fitness devices. It's also implemented in weather stations, HVAC systems, and IoT devices for environmental monitoring, particularly where waterproof performance is required.

Maintenance and Precautions

LPS33HWTR 集成电路(IC) ST(意法半导体) 封装LGA-10 批次22+深圳市创芯联盈电子有限公司

While the LPS33HWTR requires minimal maintenance, users should avoid exposing the sensor to corrosive chemicals or pressures beyond its specified range. The sensing membrane is protected but not indestructible. For optimal performance, ensure clean, dry air access to the pressure port. When designing the PCB, follow manufacturer guidelines for pad layout and keep sensitive analog traces away from noise sources. Regular calibration checks are recommended for critical applications.

商家经验真实案例 · 安全可信
5060ti和5070性能差多少
本文对比分析5060ti与5070、5070ti的性能差异,从核心参数到实际应用场景,帮助读者清晰了解不同型号间的性能差距及适用场景。

B2B Procurement Guide

When sourcing LPS33HWTR sensors in bulk, verify the manufacturer's quality certifications and request production test reports. Lead times typically range from 8-12 weeks for large orders. Consider purchasing through authorized distributors to ensure genuine components. For custom configurations (e.g., specific calibration or packaging), minimum order quantities usually apply. Evaluate total cost of ownership, including any necessary interface components and potential integration support.

Related Manufacturers