Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

LPC11E67JBD48

Updated: 2026-07-29

Overview

The LPC11E67JBD48 is a 32-bit microcontroller from NXP Semiconductors, based on the ARM Cortex-M0+ core. It is designed for embedded applications requiring low power consumption and high performance. The microcontroller features a rich set of peripherals, including GPIO, UART, SPI, I2C, and ADC, making it versatile for various applications. With its compact size and efficient design, the LPC11E67JBD48 is ideal for industrial control systems, consumer electronics, and IoT devices. It operates at a frequency of up to 50 MHz and includes features like power management and sleep modes to optimize energy usage.

Structure and Working Principle

ST 存储IC M24C02-WMN6TP IC EEPROM 2K I2C 400KHZ 8SO深圳市安博威科技有限公司

The LPC11E67JBD48 microcontroller integrates an ARM Cortex-M0+ core, which executes Thumb-2 instructions for efficient processing. The core is supported by on-chip memory, including flash and SRAM, enabling fast data access and storage. The microcontroller's peripherals are connected via an AHB-Lite bus, ensuring seamless communication between components. The working principle involves executing programmed instructions stored in flash memory. The microcontroller interacts with external devices through its GPIO pins and communication interfaces like UART and SPI. Power management units regulate voltage levels, ensuring stable operation across different conditions.

商家经验真实案例 · 安全可信
p1604ed场效应管参数
本文详细解析p1604ed场效应管的关键参数,包括其电气特性、应用场景以及选型时的注意事项,帮助工程师更好地理解和应用该器件。

Key Features

The LPC11E67JBD48 offers several key features, including a 50 MHz ARM Cortex-M0+ core, 128 KB flash memory, and 16 KB SRAM. It supports multiple communication protocols, such as UART, SPI, and I2C, facilitating connectivity with sensors and other devices. The microcontroller also includes a 12-bit ADC for analog signal processing. Low power consumption is a standout feature, with multiple sleep modes and power-saving techniques. The device operates at a wide voltage range (1.8V to 3.6V), making it suitable for battery-powered applications. Additionally, it features hardware CRC calculation and a unique device serial number for enhanced security.

Application Areas

The LPC11E67JBD48 is widely used in industrial control systems, where it manages sensors, actuators, and communication modules. Its low power consumption and robust performance make it ideal for automation and monitoring applications. The microcontroller is also employed in consumer electronics, such as smart home devices and wearable technology. In the IoT sector, the LPC11E67JBD48 enables connectivity and data processing for smart devices. Its compact size and energy efficiency are particularly advantageous for portable and battery-operated products. Other applications include medical devices, automotive systems, and embedded computing solutions.

Maintenance and Precautions

LPC11E67JBD48K 单片机MCU 恩智浦 封装LQFP48 批号25+深圳市中芯巨能电子有限公司

To ensure longevity and reliability, the LPC11E67JBD48 should be handled with ESD precautions. Proper grounding and anti-static measures are essential during installation and maintenance. The microcontroller's operating conditions, such as voltage and temperature ranges, should be strictly adhered to as specified in the datasheet. Regular firmware updates and debugging can help maintain optimal performance. Avoid exposing the device to excessive moisture or mechanical stress. For troubleshooting, refer to the manufacturer's documentation and support resources.

商家经验真实案例 · 安全可信
IRFP254场效应管参数
本文深入解析IRFP254场效应管的关键参数,包括耐压值、导通电阻和栅极电荷等核心指标,帮助工程师全面了解其性能特点与应用场景。

B2B Procurement Guide

When procuring the LPC11E67JBD48, verify the supplier's authenticity to avoid counterfeit products. NXP Semiconductors or authorized distributors are recommended sources. Check for compliance with industry standards and request sample units for testing before bulk purchases. Consider lead times and minimum order quantities, as these may vary by supplier. Pricing is typically volume-dependent, with discounts available for large orders. Ensure compatibility with your existing hardware and software ecosystem to avoid integration challenges.

Related Manufacturers