Aicaigou LogoB2B WikiIndustrial Encyclopedia

LP2983IM5-1.2

Updated: 2026-07-19

Overview

The LP2983IM5-1.2 is a precision low-dropout voltage regulator manufactured by Texas Instruments, designed to deliver a fixed 1.2V output with minimal voltage deviation. As part of the LP2983 series, it stands out for its ultra-low dropout voltage (typically 80mV at 100mA load), making it ideal for battery-operated devices where power efficiency is critical. The regulator comes in a compact SOT-23-5 package, suitable for space-constrained applications. It incorporates advanced protection features including thermal shutdown and current limiting, ensuring robust performance in industrial temperature ranges (-40°C to +125°C). Its low quiescent current (typically 85μA) further enhances energy efficiency in portable electronics.

Structure and Working Principle

RICHTEK 集成电路、处理器、微控制器 RT8859AGQW IC REG IMVP-7 VR12 2OUT 56WQFN深圳市东芯盛科技有限公司

The LP2983IM5-1.2 utilizes a PNP pass transistor architecture that enables its low dropout characteristic. The internal circuitry includes a voltage reference, error amplifier, and feedback network that continuously monitors and adjusts the output voltage. When the input voltage drops close to the output level, the regulator maintains regulation with minimal headroom. Key components include the bandgap reference for temperature stability and the protection circuitry that activates during fault conditions. The device requires only a small 1μF ceramic output capacitor for stability, simplifying board design. The enable pin allows for power management by putting the device in shutdown mode when not needed.

商家经验真实案例 · 安全可信
远程开关的弊端
本文探讨远程开关在实际应用中的局限性,包括网络依赖带来的不稳定、操作延迟影响使用体验以及潜在的安全风险,帮助用户全面了解其优缺点。

Key Features

The LP2983IM5-1.2 offers several distinguishing features that make it popular in power-sensitive applications. Its ultra-low dropout voltage enables operation with input voltages as low as 1.28V, maximizing battery life in portable devices. The output voltage accuracy is ±1% under all line, load, and temperature conditions. Other notable features include low output noise (40μVRMS typical) for sensitive analog circuits, and fast transient response to load changes. The device's thermal performance is enhanced by its ability to deliver 150mA continuous current in the small SOT-23 package without requiring heatsinks in most applications.

Application Areas

This voltage regulator finds widespread use in portable electronics where stable low-voltage power is required. Common applications include powering microprocessors, FPGAs, and memory components in handheld devices. Its precision makes it suitable for analog circuits such as sensors and data converters. Industrial applications include factory automation equipment where reliable power regulation is needed in harsh environments. The automotive sector uses it for infotainment systems and electronic control units. Medical devices benefit from its low noise characteristics for sensitive measurement circuitry.

Maintenance and Precautions

LP2983IM5-1.2 电子元器件 TI德州仪器 封装SOT-23-5 批次21+深圳市柒鑫微科技有限公司

While the LP2983IM5-1.2 is designed for reliable operation, proper handling ensures optimal performance. The device should not be subjected to input voltages exceeding 16V, and reverse polarity should be avoided. Adequate PCB thermal design is recommended when operating at maximum current in high ambient temperatures. For best performance, place the input and output capacitors as close as possible to the regulator pins. The enable pin should not be left floating. When designing for high-reliability applications, derating guidelines (80% of maximum ratings) should be followed to account for component variations and environmental stresses.

商家经验真实案例 · 安全可信
免布线开关配对流程
本文详细讲解免布线开关的配对操作流程,包括准备工作、具体配对步骤及常见问题处理,帮助用户轻松完成设备连接。

B2B Procurement Guide

When procuring LP2983IM5-1.2 regulators in bulk, buyers should verify the manufacturer's authentication to avoid counterfeit components. Texas Instruments provides quantity pricing breaks starting at 1,000 units, with significant discounts at higher volumes (10,000+). Lead times typically range from 4-8 weeks for standard orders. Alternative packaging options (tape and reel) are available for automated assembly processes. Buyers should specify the exact part number (LP2983IM5-1.2/NOPB for lead-free version) and consider lifecycle status, as some LDO regulators may have newer replacements available.

Related Manufacturers