Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

LP2981-29DBVR

Updated: 2026-07-20

Overview

The LP2981-29DBVR is a low-dropout (LDO) voltage regulator manufactured by Texas Instruments. It is designed to provide a stable output voltage with minimal input-to-output differential, making it ideal for battery-powered and space-constrained applications. The device operates with a low quiescent current, enhancing energy efficiency in portable electronics. This regulator is available in a small SOT-23 package, which is suitable for compact PCB designs. It features thermal shutdown and current limit protection, ensuring reliable performance under various operating conditions. The LP2981-29DBVR is widely used in consumer electronics, medical devices, and industrial systems.

Structure and Working Principle

BQ294604DRVT 电子元器件 TI 批次21+深圳市东芯盛科技有限公司

The LP2981-29DBVR consists of a voltage reference, error amplifier, and pass transistor. The error amplifier compares the output voltage to a reference voltage and adjusts the pass transistor to maintain a stable output. The low-dropout design allows the regulator to function even when the input voltage is close to the output voltage. The device includes built-in protection features such as thermal shutdown and current limiting. Thermal shutdown activates when the junction temperature exceeds a safe threshold, preventing damage to the regulator. Current limiting protects the device and load from excessive current conditions.

商家经验真实案例 · 安全可信
160a开关用多少平方线
本文详细解答160A开关应匹配的导线截面积,分析电流与线径的关系,并提供选线建议,确保安全可靠使用。

Key Features

The LP2981-29DBVR offers several key features that make it a preferred choice for voltage regulation. Its low dropout voltage (typically 300 mV at 100 mA) ensures efficient operation even with low input voltages. The regulator provides high output voltage accuracy (±1.5% over temperature and load variations). Additionally, the device has a low quiescent current (typically 75 µA), which minimizes power consumption in battery-operated systems. The thermal shutdown and current limit features enhance reliability, making the LP2981-29DBVR suitable for demanding applications.

Application Areas

The LP2981-29DBVR is used in a wide range of applications, including portable electronics, IoT devices, and medical equipment. Its small form factor and low power consumption make it ideal for smartphones, tablets, and wearable devices. The regulator is also employed in industrial control systems and automotive electronics. In medical devices, the LP2981-29DBVR ensures stable voltage supply to sensitive components, such as sensors and microcontrollers. Its reliability and precision are critical in applications where consistent performance is essential.

Maintenance and Precautions

Mini-Circuits  LFCN-1400D+ 信号调节 LOW PASS FLTR / SURF MT / RoHS深圳市金腾微科技发展有限公司

To ensure optimal performance, the LP2981-29DBVR should be operated within its specified voltage and temperature ranges. Exceeding the maximum input voltage (typically 16 V) can damage the device. Proper PCB layout and thermal management are recommended to prevent overheating. The regulator should be stored in a dry, static-free environment to avoid moisture absorption and electrostatic discharge (ESD) damage. When soldering, follow the manufacturer's guidelines to prevent thermal stress on the component.

商家经验真实案例 · 安全可信
电容的差模与共模信号
本文详细解析电容在电路中对差模信号和共模信号的不同响应,揭示其背后的工作原理及实际应用中的关键点,帮助读者理解电容在信号处理中的独特作用。

B2B Procurement Guide

When procuring the LP2981-29DBVR in bulk, consider factors such as lead time, supplier reliability, and pricing. Texas Instruments and authorized distributors are the primary sources for genuine components. Volume discounts are often available for large orders. Verify the manufacturer's part number and packaging (e.g., tape and reel) to ensure compatibility with your assembly process. It is advisable to request samples for testing before placing a large order. Compare prices from multiple suppliers to secure the best deal.

Related Manufacturers