Aicaigou LogoB2B WikiIndustrial Encyclopedia

Low-Zinc Brass Wire

Updated: 2026-07-15

Overview

Low-zinc brass wire is a copper alloy where zinc constitutes less than 20% of the composition, distinguishing it from standard brass (30% Zn). This reduced zinc content enhances electrical conductivity while retaining brass's workability and golden hue. The alloy is particularly valued in industries requiring precise electrical performance combined with aesthetic appeal, such as premium connector manufacturing and artistic wirework. Its composition typically includes trace elements like lead or tin for improved machinability.

Physical and Chemical Properties

中创 裸电线钢丝绳 钢筋 白铜线 合金丝反复弯曲试验机弯折测试仪济南中创工业测试系统有限公司

With zinc content below 20%, this alloy exhibits electrical conductivity of 25-28% IACS (International Annealed Copper Standard), significantly higher than standard brass. Its tensile strength ranges from 300-500 MPa depending on temper, while elongation at break reaches 15-25% in annealed conditions. The material demonstrates excellent corrosion resistance to fresh water and atmospheric exposure, though it remains susceptible to dezincification in saltwater unless alloyed with arsenic or other inhibitors. Thermal conductivity is approximately 120 W/m·K, making it suitable for heat-exchanger components.

商家经验真实案例 · 安全可信
h p5铜箔生产吗
本文探讨h p5铜箔的生产情况,包括其定义、生产工艺及市场应用,帮助读者了解这一材料的特性和生产现状。

Main Applications

In electrical engineering, low-zinc brass wire serves as a cost-effective alternative to pure copper in switchgear components and relay contacts where moderate conductivity suffices. The jewelry industry utilizes its warm color for clasps and findings, often preferred over nickel-containing alloys for hypoallergenic properties. Marine applications include anti-fouling mesh and decorative boat fittings, where its corrosion resistance outperforms standard brass. Industrial uses encompass precision springs in instrumentation and brazing filler materials, with diameters ranging from 0.1mm to 6mm commonly stocked.

Safety and Storage

云母耐火高温线 GN1000℃ 纯镍丝内芯 耐高温硅树脂烧结上海蓝双电气有限公司

As a stable metal alloy, low-zinc brass wire presents minimal handling risks under normal conditions. However, grinding or welding operations may generate zinc oxide fumes requiring local exhaust ventilation. The material is REACH and RoHS compliant when lead-free grades are specified. Storage recommendations include polyethylene wrapping to prevent oxidation in humid environments. Bulk coils should be stored on edge to prevent deformation, with desiccant packs advised for long-term storage. Contact with ammonia-based cleaners must be avoided to prevent stress corrosion cracking.

商家经验真实案例 · 安全可信
63a电流用多大铜线
本文详细解析63A电流环境下铜线截面积的选择方法,包括安全载流量计算、线径选择建议,以及实际应用中的注意事项,帮助读者准确匹配电线规格。

B2B Procurement Guide

Industrial buyers should specify: 1) Zinc content tolerance (typically ±1%), 2) Temper (soft/quarter-hard/half-hard), 3) Surface finish (bright/drawn/oxidized), and 4) Packaging (spool/coil dimensions). MOQs for specialty diameters often start at 100kg, with mill runs requiring 3-6 week lead times. Quality verification should include conductivity testing (4-point probe method) and spectrochemical analysis for composition. Reputable suppliers provide EN 12164 or ASTM B134 certification. Just-in-time procurement is feasible for standard diameters (0.5mm, 1mm, 2mm) maintained in Asian and European warehouses.

Related Manufacturers