Overview
Low-pressure membrane elements are specialized filtration devices engineered to operate efficiently at pressures below 1 bar (14.5 psi). They are integral to membrane bioreactors (MBRs), ultrafiltration (UF), and microfiltration (MF) systems. These elements consist of a semi-permeable membrane layer supported by a porous substrate, enabling selective separation of particles and solutes. Their design prioritizes energy efficiency, making them ideal for large-scale water treatment where reducing operational costs is critical. Unlike high-pressure reverse osmosis (RO) membranes, low-pressure variants minimize energy consumption while maintaining high rejection rates for contaminants like bacteria, viruses, and colloids.
Structure and Working Principle
A typical low-pressure membrane element comprises multiple layers: a dense active skin layer for separation, a porous support layer for mechanical strength, and sometimes a protective outer mesh. The asymmetric structure ensures high permeability while resisting clogging. Materials like PVDF or PES are chosen for their hydrophilicity and chemical stability. During operation, feedwater flows tangentially across the membrane surface under low pressure. Clean permeate passes through the membrane pores, while rejected particles remain on the concentrate side. This cross-flow design reduces fouling and extends membrane life. Some elements feature hollow-fiber or spiral-wound configurations to maximize surface area within compact modules.
Key Features
Low-pressure membrane elements excel in flux rates (typically 20–100 LMH, or liters per square meter per hour) while operating at pressures as low as 0.1–0.5 bar. Their pore sizes range from 0.01 μm (tight UF) to 0.1 μm (MF), effectively removing turbidity and pathogens without excessive energy use. Advanced anti-fouling coatings, such as polyethylene glycol (PEG), enhance performance in challenging feedwaters. These elements also exhibit strong tolerance to chlorine (up to 200 ppm for PVDF), simplifying maintenance. Their modular design allows easy scalability, from small residential units to industrial plants processing thousands of cubic meters daily.
Application Areas
In municipal water treatment, low-pressure membranes replace conventional sand filters, offering superior pathogen removal and smaller footprint. They are pivotal in MBR systems for wastewater reuse, meeting stringent discharge standards like China’s Class 1A. Industries leverage these elements for process water purification, particularly in food and beverage (e.g., juice clarification) and pharmaceuticals (e.g., sterile water production). Emerging applications include pretreatment for seawater desalination and landfill leachate treatment, where their low fouling tendency reduces RO system load.
Maintenance and Precautions
Regular maintenance includes periodic backwashing (every 15–60 minutes) and chemically enhanced backwash (CEB) weekly using sodium hypochlorite or citric acid. Annual clean-in-place (CIP) with 0.1–0.5% NaOH or HCl restores flux. Avoid temperatures above 40°C for prolonged periods, which may degrade polymer membranes. Sudden pressure surges should be prevented with control valves. Storage demands wet conditions; dried membranes require glycerin soaking to prevent pore collapse. Always follow manufacturer guidelines for chemical compatibility to avoid irreversible damage.
B2B Procurement Guide
When sourcing low-pressure membrane elements, verify certifications like NSF/ANSI 61 for drinking water safety or FDA compliance for food contact. Request pilot testing data for your specific feedwater to confirm rejection rates and fouling potential. Leading manufacturers include DuPont Water Solutions, SUEZ, and Toray Industries. Bulk orders (100+ elements) often attract 10–20% discounts. Consider total cost of ownership (TCO), including energy savings and lifespan, rather than upfront price alone. For OEMs, custom pore sizes or housing designs may be negotiable at MOQs of 500+ units.
Related Manufacturers
- 主营：软化阀、软水阀、玻璃钢、纯水低压、过滤器、控制阀、传感器、控制器、过滤罐、钠离子、石英砂、软水机、海德能、纯水设备、工业废水、前置过滤、塑料转子、线绕滤芯、加药装置、过滤净水、机玻璃柱、交换树脂、通用配件、碱性树脂、熔喷滤芯
- 主营：水处理反渗透膜、全自动过滤阀软化阀、PP棉滤芯、反渗透水处理设备、活性炭滤芯、工业自动软水机、软水盐、工业纯水机设备、折叠滤芯、熔喷滤芯、线绕滤芯、不锈钢过滤器、滤罐、RO控制器、润新控制阀
- 主营：无烟煤、石英砂滤料、活性炭、通用滤膜、离子交换树脂、反渗透膜、玻璃钢罐
- 主营：反渗透膜、阴阳离子交换树脂、美国海德能反渗透膜、销售反渗透膜元件回收、进口苏伊士反渗透膜、反渗透ro膜销售回收、ro反渗透膜销售、二手旧反渗透膜销售、二手陶氏反渗透膜销售、废弃反渗透膜回收销售、阴阳离子交换树脂回收、阴离子阳离子树脂回收、大孔强碱性阴离子交换、过期丙烯酸树脂、废旧离子回收、ro反渗透膜清洗销售、美国陶氏反渗透膜、回收二手ro膜销售、回收反渗透膜销售、D113大孔吸附树脂、超纯水废旧树脂
- 主营：反渗透膜、离子交换树脂、岩棉板、玻璃棉板、橡塑板、橡塑管、挤塑板、玻璃棉管、岩棉管、硅酸铝板、硅酸铝针刺毯、岩棉卷毡、玻璃棉卷毡、硅酸铝管
- 主营：苯乙烯、采暖水、计量泵、低压ro膜、超纯水、带内衬、漂莱特、检测仪、阳树脂、循环水、卧式泵、阻垢剂、纯净水、海德能、加药泵、压力表、过滤阀、专用ro膜、工业ro膜、软化树脂、管道水垢、芯含滤芯、家用井水、交换树脂、水垢清洗
- 主营：反渗透设备、反渗透膜、紫外线杀菌设备、低压膜、全自动加药装置
- 主营：纯水设备、软化水设备、水处理滤芯、反渗透膜元件、电泳漆超滤膜、南开软化树脂、容鑫泰玻璃钢罐
- 主营：反渗透设备、实验室纳滤、实验室污水、超滤膜分离设备、污水处理设备、陶瓷膜实验室、养殖污水处理
- 主营：大流量滤芯、熔喷滤芯、油滤芯、滤膜元件、空气滤筒、滤油机、线绕滤芯、板框过滤器、空压机滤芯、滤油车、精密滤芯、吸油过滤器、回油过滤器、稀油站滤芯、双筒过滤器、空气过滤棉、聚结分离滤芯、天然气滤芯、油气分离滤芯、不锈钢滤网、活性炭滤芯、折叠滤芯、铜烧结滤芯、除尘滤筒、烧结滤芯、再生滤芯
- 主营：反渗透膜元件、污废水处理设备、纯水系统、膜分离浓缩
- 主营：mbr膜架、帘式膜、mbr膜片、过滤膜、mbr膜组件、中空纤维、不锈钢膜架、生物反应器、插片式膜组件
- 主营：工业ro 卷膜机、卷膜机、管式膜、中空纤维膜排丝机、中空纤维膜收丝机、膜设备、围板箱、造口袋、盘管机、自动卷膜、工业ro膜、造瘘袋、封口机、绕丝机、封边机、引流袋、超滤管、移液管、护套管、培养瓶、焊接机、滤管机、对接机、焊接设备、焊机设备
- 主营：抗冲击、平板膜、清洗频率、滤膜abs、滤膜膜片、低压出水、导流板滤膜、清洗操作、组件清洗、自动控制、出水水质、剩余污泥、不锈钢支架、一体化污水、生物反应器
- 主营：反渗透设备、纯净水设备、桶装水设备、大桶水灌装设备、工业超滤设备、井水处理设备、纯化水设备、去离子软化水设备、EDI超纯水设备维修、自来水设备、无菌水箱、车用尿素设备、离子交换设备、电镀超纯水设备、高纯水设备、Edi超纯水设备、RO反渗透膜、不锈钢过滤器、除铁锰过滤器、除氟水处理设备、除黄泥水设备、净化水设备、工业纯净水设备、工业反渗透设备、净化设备
- 主营：反渗透、纯水机、软化水、水处理、过滤器
- 主营：三菱mbr、垃圾渗滤液处理、实验室废水、超滤膜、纳滤膜、一体化净水设备、工业废气处理、废水处理设备、一体化净水器、碧水源MBR膜、海森MBR膜、中空纤维膜、喷淋塔、一体化污水处理设备租、三菱化学MBR膜、MBR膜组件、养殖废水处理、应急污水处理设备、平板膜、柔性平板膜、mbr膜、出租污水处理设备、污水处理设备、医院废水处理、反渗透膜
- 主营：管式微滤膜元件
- 主营：反渗透膜元件