Overview
Low Gloss POM is a modified version of polyoxymethylene engineered to minimize surface reflectivity while retaining the material’s inherent advantages, such as high tensile strength and chemical resistance. The matte finish is achieved through specialized additives or surface treatments during production. This variant is particularly favored in applications where glare reduction or aesthetic uniformity is critical, such as automotive dashboards or premium appliance components. Unlike standard POM, low-gloss grades prioritize visual consistency across large surfaces and are often specified in industries with stringent design requirements. The material maintains POM’s core benefits, including low moisture absorption and exceptional dimensional stability, making it suitable for precision parts.
Physical and Chemical Properties
Low Gloss POM exhibits a typical tensile strength of 60–70 MPa and a flexural modulus of 2,500–3,000 MPa, comparable to standard POM but with a controlled surface roughness (Ra ~0.8–2.0 µm) to diffuse light. Its thermal stability allows continuous use at temperatures up to 85°C, with short-term tolerance to 100°C. The material’s low coefficient of friction (0.1–0.3 against steel) makes it ideal for sliding components. Chemically, it resists hydrocarbons, alcohols, and weak acids but degrades in strong acids, bases, and hot water. UV stabilizers are often added for outdoor applications. The matte effect is typically achieved through inorganic fillers (e.g., silica) or micro-texturing during molding, which scatter incident light without compromising mechanical performance.
Main Applications
In the automotive sector, Low Gloss POM is used for interior trim, button panels, and seat adjustment mechanisms where glare reduction enhances driver comfort. Consumer electronics manufacturers employ it for keyboard keys, camera housings, and wearable device components to achieve a premium, non-reflective finish. Industrial applications include conveyor system guides, bearing pads, and food processing equipment parts, leveraging its FDA compliance (for specific grades) and wear resistance. The material’s noise-dampening properties also make it suitable for gears and bushings in quiet-operation machinery. Designers often select it for products requiring a consistent matte appearance across large surfaces, as it avoids the uneven gloss common in painted or coated alternatives.
Safety and Storage
While Low Gloss POM is generally safe in finished products, precautions are necessary during processing. Melting the material above 200°C may release trace formaldehyde, requiring adequate ventilation. Dust generated during machining should be controlled via local exhaust systems, as prolonged inhalation may irritate respiratory tracts. Storage recommendations include keeping the material in original packaging or sealed containers to prevent moisture absorption (though POM is less hygroscopic than other engineering plastics). Avoid exposure to direct sunlight or high humidity, which could affect processing consistency. For long-term storage (>6 months), nitrogen-purged containers are advisable to prevent oxidative degradation. Fire safety measures should follow standard plastic protocols, as POM is combustible with a LOI of 15–16%.
B2B Procurement Guide
When sourcing Low Gloss POM, buyers should specify technical requirements such as gloss level (usually measured at 60° incidence), mechanical properties (e.g., impact strength for snap-fit parts), and regulatory certifications (e.g., FDA, RoHS). Sample testing is recommended to verify surface uniformity across production batches. Suppliers typically offer grades with 10–30% glass or mineral fillers for enhanced stiffness, which may affect gloss. Prices vary by volume, with bulk orders (>1 ton) often discounted by 10–15%. Lead times range from 2–6 weeks for standard grades, while custom formulations may require 8–12 weeks. Preferred procurement channels include specialized polymer distributors or direct engagement with manufacturers like Celanese, DuPont, or Mitsubishi Engineering-Plastics, who provide technical data sheets with gloss measurements.
Related Manufacturers
- 主营：POM、PVDF、PA66、日本旭化成pom、日本宝理pom、美国杜邦pom、PPS、PBT、Pom500p、Pom100p、Pom900p、F20-03、M90-44、Ppsu、PPA、POE、PA9T、德国巴斯夫pa66、共聚甲醛赛钢、PCTG、PC材料、PC ABS材料、ABS、PA6材料
- 主营：LCP、PA66、PSU、TPEE、PEEK、PA12、PBT/ASA、PPSU、PPS、PC、PC/ABS、ABS、润滑脂、PTFE、特富龙
- 主营：塑胶颗粒、聚丙烯塑料、ABS塑料、耐低温尼龙塑料、耐低温PP聚丙烯、POM塑料、日本宝理POM代理、陶氏PE塑料、耐高温PP聚丙烯、台湾PP聚丙烯塑料、巴塞尔PP代理、道达尔PP代理、韩国道达尔代理商、台湾台塑POM
- 主营：PVDF、FEP、PFA、POM、PPA、PPS、PA66、PA46、PA9T、COC、PA6T、PC、LCP、PA12、PA6、PEEK、PARA、PC/ABS、氟塑料、弹性体
- 主营：弹性体、工程材料、特种塑料、增韧剂、氟塑料
- 主营：EAA、EMAA、沙林树脂、中低温胶膜、PTW、增韧剂、相容剂、PO热熔胶颗粒、挤出薄膜、马来酸酐接枝、中高温胶膜、电线电缆膜、塑料改性剂
- 主营：PA、PC、PBT、耐低温、PP、pc/abs、PC/PBT、PC/PET、POM、LCP、PPS、耐高温、耐化学、代替金属、弹性体
- 主营：工程塑料、奇美ABS、PA66、PA6、塑料颗粒、PPS聚苯硫醚、塑料制品、聚碳酸酯PC、聚甲醛POM、耐磨塑料、均聚物、聚四氟乙烯PTFE、POM、PC、PC/ABS、PE
- 主营：工程塑料、PA66、PEEK、低光泽、POM、PC、PVDF、ABS、EVA、TPEE、PCTG、PMMA、LCP
- 主营：POM美国杜邦、POM巴斯夫、POM韩国工程、POM韩国科隆、PA66美国杜邦、PA66巴斯夫、PA66东丽、PA66旭化成、PA66首诺、PBT巴斯夫、PBT杜邦、PBT东丽、PBT台湾新光、PBT德国朗盛、PC科思创、PC嘉兴帝人、500P、100P、M90-44、F20-03、2805、2405、2807、L-1225Y、SK605
- 主营：POM聚甲醛、工程塑料PA6/66、通用塑料PP/ABS、防弹胶PC、特种塑料PPS/LCP、500P杜邦POM、PC/ABS合金品牌、PBT/PET、聚乙烯PE
- 主营：特种工程塑料、弹性体塑料、通用塑料、工程塑料、合金塑料
- 主营：低光泽POM聚甲醛、聚甲醛
- 主营：EVA
- 主营：POM、TPV、ABS、EMA、PA、PBT、TPU、PPS、EEA、沙林、EAA、PA66、PA6、EBA