Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

LMV358TP-SR

Updated: 2026-07-29

Overview

The LMV358TP-SR is a dual operational amplifier designed for low-voltage and low-power applications. It is part of Texas Instruments' LMV series, optimized for portable and battery-operated devices. With a rail-to-rail output swing and a wide supply voltage range (2.7V to 5.5V), it is ideal for precision analog circuits in industrial and consumer electronics. This IC is packaged in a SOT-23-5 form factor, making it suitable for space-constrained designs. Its low quiescent current (typically 300 µA per amplifier) ensures minimal power drain, extending battery life in portable applications.

Structure and Working Principle

SGM2032-2.9YN5G/TR 电子元器件 SGMICRO 批号24+深圳智普芯科技有限公司

The LMV358TP-SR integrates two independent op-amps on a single silicon die. Each amplifier consists of input differential pairs, gain stages, and output buffers. The rail-to-rail output stage allows the signal to swing close to both supply rails, maximizing dynamic range in low-voltage systems. The device operates on a single or dual supply voltage and features internal frequency compensation for stability. Its input common-mode range includes ground, enabling direct interfacing with sensors or signals referenced to ground.

商家经验真实案例 · 安全可信
IGBT代换指南:型号匹配全解析
本文解析IGBT型号代换问题,以igbth20pr5与20n135fd为例,说明代换需考虑的参数匹配、性能差异及安全验证,助你避开电路隐患。

Key Features

The LMV358TP-SR offers several advantages for low-power designs. Its rail-to-rail output ensures maximum signal swing, critical for battery-powered systems. The wide supply voltage range accommodates various power sources, from 2.7V to 5.5V. Other notable features include low input bias current (typically 1 pA), low offset voltage (3 mV max), and a gain bandwidth product of 1 MHz. These characteristics make it suitable for precision applications such as sensor interfaces, active filters, and signal conditioning circuits.

Application Areas

This operational amplifier is widely used in portable medical devices, handheld test equipment, and IoT sensors due to its low power consumption. It is also employed in automotive electronics for signal processing in low-voltage systems. Industrial applications include process control interfaces, transducer amplifiers, and data acquisition systems. Consumer electronics like smartphones, tablets, and wearables leverage its small footprint and efficiency for audio and sensor signal conditioning.

Maintenance and Precautions

LMV358TP-SR LMV358TP 3PEAK思瑞浦 SOP8 放大器 原装正品深圳市芯齐壹科技有限公司

To ensure optimal performance, avoid exposing the LMV358TP-SR to supply voltages beyond its rated maximum (5.5V). Proper decoupling capacitors (0.1 µF) near the supply pins are recommended to minimize noise. PCB layout should prioritize short traces for high-impedance inputs to reduce parasitic capacitance. For applications with high gain, ensure adequate thermal management to prevent drift in precision circuits. Storage should be in anti-static packaging to avoid ESD damage.

商家经验真实案例 · 安全可信
IGBT替换指南
本文深入解析IGBT模块的替换原则,从参数匹配到散热考量,提供实用替换策略,帮助工程师在设备维护中做出合理选择,确保系统稳定运行。

B2B Procurement Guide

When sourcing the LMV358TP-SR, verify the manufacturer (Texas Instruments or authorized distributors) to ensure authenticity. Bulk pricing typically ranges from $0.10 to $0.50 per unit, depending on quantity and supplier agreements. Key procurement considerations include lead time (commonly 8–12 weeks for large orders), packaging (tape and reel for automated assembly), and compliance with RoHS directives. Evaluate alternative part numbers (e.g., LMV321 for single op-amp needs) for cost or availability advantages.

Related Manufacturers