Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

LMV324I

Updated: 2026-07-24

Overview

The LMV324I is a quad-channel, low-voltage operational amplifier from Texas Instruments, widely used in portable and battery-powered electronics. It operates at a supply voltage range of 2.7V to 5.5V, making it suitable for modern low-power designs. As a CMOS-based op-amp, it offers rail-to-rail output swing and low input bias current. These characteristics make it particularly useful in precision applications where power consumption and signal integrity are critical factors.

Structure and Working Principle

LMV324IPWR 运算放大器 TI/德州仪器 TSSOP-14 25/26+深圳市芯锐华科技有限公司

The LMV324I consists of four independent op-amps in a single IC package, sharing common power supply pins. Each amplifier features differential inputs and a single output stage capable of swinging close to both supply rails. The device uses CMOS technology to achieve its low-power characteristics, with typical quiescent current of 250μA per amplifier. Internal circuitry includes input protection diodes and compensation capacitors to ensure stability under various load conditions.

商家经验真实案例 · 安全可信
射频控制器是什么
本文通俗易懂地解释了射频控制器的工作原理、应用场景以及选择时的注意事项,帮助读者快速了解这一工业电子设备的核心部件。

Key Features

Primary features include an ultra-low input bias current (typically 1pA) and a wide gain bandwidth product of 1MHz. The rail-to-rail output stage allows for maximum dynamic range in low-voltage applications. Additional benefits include a high common-mode rejection ratio (CMRR) of 70dB and power supply rejection ratio (PSRR) of 90dB. These specifications make the LMV324I particularly suitable for precision measurement circuits and sensor interface applications.

Application Areas

Common applications include portable medical devices, handheld test equipment, and battery-powered instrumentation. The low-power characteristics make it ideal for always-on sensor nodes in IoT applications. In industrial settings, the LMV324I is frequently used in process control systems, particularly where multiple signal conditioning channels are required in space-constrained environments. Consumer electronics applications include audio processing and touch screen controllers.

Maintenance and Precautions

LMV324IPWR 通用放大器 TI 交流共模抑制 输入偏置电流深圳市龙宏电子科技有限公司

Proper handling includes standard ESD precautions typical for CMOS devices. The IC should be stored in anti-static packaging when not in use. For optimal performance, power supply decoupling capacitors (typically 0.1μF) should be placed close to the device pins. PCB layout should minimize parasitic capacitance at the inputs to prevent oscillation in high-impedance circuits.

商家经验真实案例 · 安全可信
提高整流管热稳定性
本文从材料选择、散热设计和工艺优化三个维度,深入解析提升整流管热稳定性的实用方法,帮助解决高温环境下的性能衰减问题。

B2B Procurement Guide

When procuring LMV324I in quantity, consider the package type (SOIC-14 or TSSOP-14) required for your application. Lead times may vary based on market conditions, so early planning is recommended. Quality assurance should include verification of lot date codes and proper storage conditions. For critical applications, consider requesting full datasheet specifications from the supplier to ensure compliance with your requirements.

Related Manufacturers