Aicaigou LogoB2B Wiki

LMC6464AIMX

Updated: 2026-09-13

Overview

The LMC6464AIMX is a quad CMOS operational amplifier from Texas Instruments, optimized for low-voltage and battery-powered applications. Its design emphasizes precision and energy efficiency, making it suitable for medical instrumentation, portable electronics, and industrial control systems. The op-amp operates over a wide supply voltage range (2.7V to 15V) and features minimal power consumption (typically 20µA per channel). Its rail-to-rail output swing ensures maximum dynamic range in signal chains, while its high input impedance minimizes loading effects on sensitive sensors.

Structure and Working Principle

The LMC6464AIMX integrates four independent op-amps in a single package, each leveraging CMOS technology for low noise and high input impedance. Internal circuitry includes differential input stages and push-pull output drivers, enabling stable performance across varying loads. Its working principle relies on amplifying voltage differences between inputs while maintaining linearity. The device includes built-in ESD protection (up to 2kV) and latch-up immunity, ensuring robustness in harsh environments. Critical parameters like offset voltage (typically 3mV) and gain bandwidth (1.2MHz) define its precision capabilities.

Key Features

Key advantages of the LMC6464AIMX include ultra-low power consumption (ideal for IoT devices), rail-to-rail output for full signal utilization, and a wide operating temperature range (-40°C to 125°C). Its CMOS architecture eliminates crossover distortion common in bipolar op-amps. Additional features include a high common-mode rejection ratio (CMRR) of 85dB and a low input bias current (1pA), critical for high-impedance sensor interfaces. The device is available in industry-standard packages (e.g., SOIC-14), facilitating easy integration into existing designs.

Application Areas

The LMC6464AIMX is widely deployed in medical devices such as ECG monitors and glucose meters, where precision and low power are paramount. Industrial uses include process control systems and strain gauge amplifiers, leveraging its noise immunity. Consumer applications span wearable tech and handheld instruments, benefiting from its compact form factor. Automotive systems (e.g., battery management) also utilize this op-amp for its reliability under temperature extremes.

Maintenance and Precautions

To ensure longevity, avoid exposing the LMC6464AIMX to voltages beyond its rated supply range (absolute maximum: 16V). Proper PCB layout practices—such as minimizing trace lengths and using decoupling capacitors—reduce noise interference. ESD precautions are critical during handling; use grounded workstations and anti-static packaging. For high-precision applications, calibrate offset voltages externally if necessary. Storage should adhere to moisture-sensitive level (MSL) guidelines to prevent oxidation.

B2B Procurement Guide

When sourcing the LMC6464AIMX, prioritize authorized distributors like Texas Instruments’ certified partners to avoid counterfeit components. Bulk purchases (reels of 2,500 units) often reduce per-unit costs by 15-20%. Evaluate suppliers based on lead times (typically 6-8 weeks for non-stock orders) and certifications (e.g., ISO 9001). Request samples to verify performance in your specific application. Consider alternative part numbers (e.g., LMC6462 for dual-channel needs) for design flexibility.

Related Manufacturers