LM339A-TR

Overview

The LM339A-TR is a quad differential comparator integrated circuit (IC) manufactured by Texas Instruments and other semiconductor companies. It is designed for precision voltage comparison tasks in industrial, automotive, and consumer electronics. The device operates over a wide voltage range (2V to 36V), making it versatile for diverse applications. Its low power consumption and high input impedance are key advantages. The LM339A-TR is available in surface-mount packages like SOIC-14, which is suitable for automated assembly processes. It is widely used in circuits requiring analog signal comparison, such as battery monitors, oscillators, and level detectors. The IC’s robust design ensures reliable performance even in harsh environments.

Structure and Working Principle

LM339A-TR LM339A 3PEAK思瑞浦 TSSOP14 比较器原装正品

深圳市芯齐壹科技有限公司

The LM339A-TR consists of four independent voltage comparators with open-collector outputs. Each comparator compares two input voltages: the non-inverting (+) and inverting (-) inputs. When the voltage at the + input exceeds the - input, the output switches to a high-impedance state; otherwise, it sinks current to ground. Internal circuitry includes a differential input stage, gain stage, and output driver. The open-collector outputs allow wired-OR configurations for logic applications. The device does not include internal hysteresis, which may require external components for noise immunity in certain designs. Its response time is typically 1.3 µs, suitable for medium-speed applications.

商家经验真实案例 · 安全可信

3000w电机配多大控制器

本文解析3000W电机匹配控制器的关键参数，包括功率适配原则、过载保护机制和散热需求，帮助用户合理选择控制器规格。

Key Features

The LM339A-TR offers a wide single-supply voltage range (2V to 36V) or dual supplies (±1V to ±18V), accommodating diverse system requirements. Its low supply current (0.8 mA per comparator) makes it ideal for battery-powered devices. The IC also features a low input bias current (25 nA) and offset voltage (2 mV), ensuring high accuracy. Other notable features include a common-mode input range extending to ground, ESD protection, and a temperature range of -40°C to +125°C. The open-drain outputs enable flexible interfacing with digital logic (e.g., TTL, CMOS). These attributes make the LM339A-TR a preferred choice for cost-sensitive yet performance-critical designs.

Application Areas

The LM339A-TR is extensively used in voltage monitoring circuits, such as overvoltage/undervoltage detectors in power supplies and battery management systems. Its fast response suits applications like zero-crossing detectors in AC systems and pulse-width modulation (PWM) controllers. In consumer electronics, it appears in touch switches, LED drivers, and audio equipment. Industrial applications include motor control, sensor interfaces, and alarm systems. Automotive systems leverage its reliability for fuel injection controls and dashboard indicators. The IC’s versatility also extends to DIY projects, such as light-activated triggers and analog-to-digital converters.

Maintenance and Precautions

LM339A-TR 电子元器件 3PEAK/思瑞浦封装TSSOP14 批次24+

世平微商贸(深圳)有限公司

To ensure longevity, avoid exposing the LM339A-TR to voltages beyond its absolute maximum ratings (e.g., 36V supply voltage). Proper decoupling capacitors (0.1 µF) near the power pins are recommended to suppress noise. For stable operation, minimize trace lengths for high-impedance inputs to reduce parasitic capacitance. When designing PCBs, separate analog and digital grounds to prevent coupling interference. If hysteresis is needed, add external resistors to the feedback loop. Storage conditions should adhere to standard moisture-sensitive level (MSL) guidelines, typically at <40°C and <90% relative humidity for long-term reliability.

商家经验真实案例 · 安全可信

sf-s233r粉盒型号

本文解析sf-s233r粉盒型号的适用机型、使用寿命及兼容性，帮助用户了解该型号碳粉盒的关键特性与实际使用中的注意事项。

B2B Procurement Guide

When procuring LM339A-TR in bulk, verify the manufacturer’s authenticity to avoid counterfeit parts. Key distributors include Texas Instruments, ON Semiconductor, and STMicroelectronics. Lead times vary; plan for 8–12 weeks for large orders during peak demand. Compare datasheets for minor variations in specs (e.g., input offset voltage) between brands. Pricing tiers depend on quantity: 1,000-unit orders may cost ~$0.15/unit, while 10,000+ units could drop to ~$0.10. Consider reel packaging (e.g., 2,500 units per reel) for automated assembly. Request samples for prototype validation before full-scale procurement.