Overview
Lightweight ceramic fiber modules are pre-compressed insulation units made from alumina-silica ceramic fibers. They are engineered for rapid installation in high-temperature environments, expanding to fill gaps upon heating. These modules replace traditional refractory bricks due to their superior energy efficiency and durability. Developed in the mid-20th century, ceramic fiber technology revolutionized industrial insulation by reducing heat loss and furnace downtime. Modules are typically mounted using alloy anchors and can withstand temperatures up to 1,600°C (2,912°F), depending on the composition.
Physical and Chemical Properties
Ceramic fiber modules exhibit exceptional thermal stability, with a melting point near 1,760°C (3,200°F). Their low thermal conductivity (0.09–0.15 W/m·K at 1,000°C) minimizes heat transfer, while their fibrous structure resists thermal shock and mechanical stress. Chemically, they are inert to most acids and alkalis but may degrade in prolonged contact with hydrofluoric acid or strong alkalis at high temperatures. The material is non-combustible and complies with ASTM C892 standards for high-temperature fiber insulation.
Main Applications
These modules are widely used in steel industry reheating furnaces, petrochemical cracking units, and glass melting furnaces. Their lightweight nature reduces structural load, while their modular design simplifies maintenance. In power generation, they insulate boilers and exhaust systems. Niche applications include aerospace heat shields and automotive exhaust insulation. Custom shapes (e.g., wedge, hex) are available for complex geometries.
Safety and Storage
Handle with gloves and N95 masks to prevent skin/eye irritation from loose fibers. OSHA recommends limiting airborne fiber exposure below 1 fiber/cm³. Modules should be stored horizontally in original packaging to prevent deformation. Disposal follows local regulations for ceramic waste. Some grades are bio-soluble (e.g., alkaline earth silicate fibers), reducing health risks. Always consult SDS before use.
B2B Procurement Guide
Key procurement criteria include temperature rating (e.g., 1,260°C vs. 1,600°C grades), fiber type (standard or bio-soluble), and compression recovery rate (>90% for long service life). Leading manufacturers include Morgan Advanced Materials and Unifrax. Bulk orders (100+ modules) often attract 10–15% discounts. Verify supplier certifications (ISO 9001, ASTM compliance) and request test reports for thermal conductivity and shrinkage.
Related Manufacturers
- 主营：刚玉莫来石砖、烧结刚玉砖、氧化铝空心球砖、陶瓷纤维板毡模块、锆英石砖、铬刚玉砖、锆莫来石砖、硅线石砖、刚玉浇注料、铬刚玉浇注料、碳化硅浇注料
- 主营：陶瓷纤维板、陶瓷纤维毯、陶瓷纤维模块、耐火浇注料、纳米隔热板
- 主营：陶瓷纤维模块、陶瓷纤维板、陶瓷纤维棉、硅酸铝针刺毯、纳米隔热板、耐火浇注料
- 主营：蓄热烧嘴、火焰监测器、点火变压器、模块炉门、铝水真空泵、熔铝炉、流槽铝液位及冷却水监测控流
- 主营：高铝砖、粘土砖、耐火球、轻质保温砖、浇注料、耐火泥、莫来石刚玉砖、氧化铝空心球砖、耐火砖
- 主营：医用钢质门、医疗病房门、手术室电动门、钢质气密门、净化钢质门、气密医疗门、电动平移门、病房钢质门、钢制医疗门、医用门厂家、手术室平移门厂家、气密门厂家
- 主营：钢结构防火涂料、厚型钢结构防火涂料、室内外膨胀型防火涂料、阻火模块、防火板、厚型防火涂料、石膏基防火涂料、室外钢结构防火涂料、防火密封胶、防火泥、阻火包、薄型钢结构防火涂料、膨胀型钢结构防火涂料、室内膨胀型防火涂料、膨胀型防火涂料、超薄型钢结构防火涂料
- 主营：莫来石、锚固件、龟甲网、陶瓷纤维板、陶瓷纤维纸、可塑料、锚固砖、浇注料、耐酸砖、耐火粘土、耐酸胶泥、碳化硅砖、防火涂料、节能涂料、保温材料、抹面材料、耐火材料、隔热保温砖、高铝耐磨砖、纤维贴面块、纳米绝热板、黏土保温砖、耐火捣打料
- 主营：针刺保温毯、高温密封垫片、硅酸铝针刺毯、陶瓷纤维纸、陶瓷纤维毡、陶瓷纤维毯、硅酸铝纤维纸
- 主营：陶瓷基片、氧化铝陶瓷、高铝耐磨瓷片、氧化铝陶瓷基片、散热陶瓷基片、电子陶瓷基片、结构陶瓷、氧化铝陶瓷片、陶瓷基板
- 主营：玻镁板、防火板、阻火包、阻火模块、防火膨胀模块、轻集料混凝土、LC5.0型轻集料混凝土、LC7.5型轻集料混凝土、屋面垫层轻集料混凝土、柔性有机堵料、防火布、L型防火隔板、防火密封胶、防火泥、集装箱防火地板、挡烟垂壁防火布、弹性防火密封胶、防火隔板、硅钛防火布、720型阻火包、电缆桥架防火板、400型阻火包、250型阻火包、电缆防火涂料、钢结构防火涂料
- 主营：电缆防火涂料、钢结构防火涂料、防火板、阻火模块、防火泥、阻火包、硅酸钙防火板、纤维增强硅酸盐板、防火密封胶
- 主营：石墨基柔性接地体、离子接地极、降阻剂、接地模块、石墨烯合金接地装置、铜覆钢接地极、稀土合金接地棒、空腹式接地装置、柔性接地体、石墨烯接地、铜包钢、离子接地、稀土合金、石墨基柔性接地、环保型铝铜稀土合金接地、铝铜稀土合金接地
- 主营：岩棉板、保温板、岩棉铝箔板、硅酸铝纤维模块、外墙保温材料
- 主营：岩棉复合板、砂浆岩棉复合板、砂浆纸岩棉复合板、硅酸铝纤维模块、网织增强岩棉板、插丝岩棉复合板、岩棉管、玻璃棉板、玻璃棉卷毡、玻璃棉管、橡塑板、橡塑管、硅酸铝针刺毡、硅酸铝管壳、泡沫玻璃板、泡沫玻璃管
- 主营：密封垫、吸音棉、通风管、陶瓷纤维模块、玻璃板、玄武岩、反光膜、复合板、橡塑管、隔音棉、酚醛板、防水板、隔气膜、防火纸、电热毯、电焊布、硅胶布、玻璃棉、橡胶皮、纤维纸、隔热棉、呼吸纸、珍珠岩、鸡蛋棉、悬挂板、海绵板
- 主营：陶瓷纤维毯
- 主营：纤维块、隔热材料、纤维贴面块、陶瓷纤维模块、耐火纤维棉、多晶莫来石、莫来石纤维板、莫来石纤维棉
- 主营：粘土耐火砖、保温砖、耐火材料、轻质耐火砖、陶瓷纤维棉、硅酸铝陶瓷纤维模块、硅酸铝陶瓷纤维毯、硅酸铝陶瓷纤维棉、硅酸铝陶瓷纤维纸、粘土质耐火砖、浇注料、高铝砖、耐酸砖、烧结砖、防火板