Overview
Laminated Material Special PP is a modified polypropylene formulation optimized for bonding layers in multi-material composites. Unlike standard PP, it incorporates additives to enhance surface energy and promote adhesion to substrates like paper, foil, or textiles. The material is widely used in industries requiring durable, lightweight laminates with aesthetic appeal. Developed to address delamination issues in high-stress environments, this PP grade undergoes specialized polymerization and compounding processes. Its molecular structure balances flexibility and rigidity, ensuring compatibility with both extrusion coating and adhesive lamination techniques.
Physical and Chemical Properties
This PP variant exhibits a melt flow index (MFI) of 10-25 g/10min (230°C/2.16kg), suitable for uniform coating applications. Its crystallinity ranges between 50-60%, contributing to dimensional stability during thermal processing. The material’s surface tension is modified to >38 dynes/cm for improved wettability. Chemically, it resists acids, alkalis, and most organic solvents below 80°C. The modified polymer chains include polar groups (e.g., maleic anhydride grafts) that enable covalent bonding with polar substrates. Thermal degradation begins at 260°C, with a Vicat softening point of 150-155°C.
Main Applications
In packaging, this PP is the base layer for stand-up pouches and retortable food containers due to its heat-seal performance. The automotive sector uses it for interior trim laminates, where it bonds fabric to ABS or PP substrates without additional adhesives. Decorative applications include synthetic wood veneers and printed laminates for furniture. Its low odor emission and compliance with EU 10/2011 food contact regulations make it suitable for microwaveable food trays. Emerging uses include solar panel backsheets and medical packaging.
Safety and Storage
While non-hazardous under normal conditions, processing above 200°C may release volatile organic compounds (VOCs). Adequate ventilation is recommended during extrusion or hot pressing. NFPA ratings are Health 1, Flammability 1, Reactivity 0. Pellets should be stored in original packaging at <30°C and <60% relative humidity. Prolonged exposure to humid environments (>24 hours) requires pre-drying at 80°C for 2-4 hours before processing to prevent bubbling. Shelf life is typically 12 months from manufacture when stored properly.
B2B Procurement Guide
Key specifications to confirm include MFI variance (±2g/10min), peel strength (>3N/15mm width), and FDA compliance if for food contact. For large orders (>20MT), request batch testing reports for thermal stability (OIT >30min at 190°C) and color consistency (Delta E <1.5). Suppliers often provide technical support for processing parameters—typical extrusion temperatures are 190-220°C with chill roll settings at 15-25°C. Consider regional logistics: pellets are commonly shipped in 25kg bags or 1MT jumbo bags with moisture barrier liners.
Related Manufacturers
- 主营：[]
- 主营：塑胶原料、通用塑料、特种塑料
- 主营：PP、POM、pc、PA66、POE、ABS、PPS、PBT、PA6
- 主营：F20-03、m90-44、m90-45、聚丙烯pp、PC-1100、pom100p、pom500p、pom900p、云天化pom、宝理pom、旭化成pom、杜邦pom、巴斯夫pa66、杜邦pa66、聚甲醛原料、埃克森美孚POE、美国苏威PPSU、科思创PC、沙伯基础PC、李长荣聚丙烯、路博润TPU、埃克森ldpe、巴塞尔ldpe、韩华ldpe、日本三菱pom
- 主营：通用塑料、工程塑料、特种塑料
- 主营：TPE、包胶TPE、三菱PC、超高透明PP材料、高透明PP、超透明PP、透明PP
- 主营：吸音棉、玄武岩、吸声体、pp防粘无纺布、阻燃板、反光膜、隔热布、隔音棉、氯丁胶、隔热纸、硅胶布、玻璃棉、呼吸纸、地板革、岩棉毡、聚丙烯、空调机、海绵管、玻纤布、弹性垫、橡塑板、聚笨板、营养土、吸音毡、橡胶垫、锅炉保
- 主营：转移膜、防雾膜、标签膜、层压膜、离型材料、模切材料、消光膜、保护膜、厚光膜、高光膜、离型膜、绝缘板、覆铜板、合成纸、基材膜、珠光膜、镭射纸、热封膜、快递白膜、光哑薄膜