Aicaigou LogoB2B WikiIndustrial Encyclopedia

ISO7841DWR

Updated: 2026-07-22

Overview

The ISO7841DWR is a digital isolator manufactured by Texas Instruments, designed to provide robust signal isolation in industrial and automotive applications. It features reinforced isolation with a high withstand voltage, ensuring reliable performance in environments with electrical noise or high voltages. This isolator supports bidirectional communication and is available in a wide-body SOIC package, making it suitable for space-constrained designs. Its high-speed data transmission capability (up to 100 Mbps) and low power consumption make it a preferred choice for modern industrial systems.

Structure and Working Principle

AO4453 场效应管 WDJ 封装SOP8 批次新年份 电子元器件深圳市三浩实创科技有限公司

The ISO7841DWR utilizes capacitive isolation technology to achieve galvanic separation between input and output circuits. This technology ensures signal integrity while blocking high-voltage transients and ground loops. The device consists of two dies separated by a isolation barrier, which provides the necessary voltage isolation. The input side converts digital signals into a high-frequency carrier, which is transmitted across the barrier and reconstructed on the output side. This method ensures minimal signal distortion and high noise immunity.

商家经验真实案例 · 安全可信
电子管6x5参数
本文详细介绍电子管6x5的基本参数、典型应用场景以及使用时的注意事项,帮助读者全面了解这款电子管的性能特点。

Key Features

The ISO7841DWR offers several standout features, including reinforced isolation rated up to 5 kV RMS and a high common-mode transient immunity (CMTI) of 100 kV/µs. These specifications make it highly reliable in noisy industrial environments. Additionally, the device operates over a wide temperature range (-40°C to +125°C), ensuring performance in extreme conditions. Its low power consumption (typical supply current of 1.7 mA per channel at 1 Mbps) helps reduce overall system energy usage.

Application Areas

The ISO7841DWR is widely used in industrial automation systems, such as PLCs, motor drives, and robotics, where signal isolation is critical for safety and performance. It is also employed in renewable energy systems, including solar inverters and battery management systems. In automotive applications, this isolator is used in electric vehicle (EV) powertrains and charging infrastructure to ensure reliable communication between high-voltage and low-voltage domains.

Maintenance and Precautions

MT47H128M8SH-25E:M Micron FBGA 25+ 电子元器件 质量稳定 原厂深圳市航芯国际半导体有限公司

To maintain optimal performance, ensure the ISO7841DWR is operated within its specified voltage and temperature ranges. Proper PCB layout is essential to avoid compromising the isolation barrier; maintain adequate creepage and clearance distances. Avoid exposing the device to moisture or contaminants, as these can degrade isolation performance. Regularly inspect for signs of physical damage or overheating, especially in high-stress applications.

商家经验真实案例 · 安全可信
设备功耗怎么算
本文详细解析设备功耗的计算方法,包括额定功率与实际功耗的区别、连续工作与间歇工作的能耗差异,以及如何通过简单公式估算日常用电量。

B2B Procurement Guide

When procuring the ISO7841DWR, verify the supplier's authenticity to avoid counterfeit products. Texas Instruments or authorized distributors are recommended sources. Bulk purchases typically offer cost savings, with prices ranging approximately $2.50 to $4.00 per unit. Consider lead times and inventory availability, especially for large-scale projects. Request samples for testing to ensure compatibility with your application. Check for compliance with relevant industry standards, such as UL, CSA, and VDE.

Related Manufacturers