Aicaigou LogoB2B WikiIndustrial Encyclopedia

ISO7741DBQR

Updated: 2026-08-30

Overview

The ISO7741DBQR is a digital isolator manufactured by Texas Instruments, designed to provide high-performance signal isolation in industrial environments. It supports bidirectional communication and offers reinforced insulation, making it suitable for applications requiring robust noise immunity and safety compliance. This device is part of a family of isolators that meet international safety standards, including IEC 60747 and UL 1577. It is commonly used in systems where electrical isolation is critical to prevent ground loops, noise interference, or high-voltage hazards.

Structure and Working Principle

ISO7741DBQR TI/德州仪器 SSOP16半导体 2021+ 电子元器件代理深圳市创芯联盈电子有限公司

The ISO7741DBQR utilizes capacitive isolation technology to transmit digital signals across an isolation barrier. It consists of two separate silicon dies connected by isolation capacitors, which provide the necessary insulation while allowing data transmission. The device operates by modulating the input signal onto a high-frequency carrier, which crosses the isolation barrier via the capacitors. On the other side, the signal is demodulated to reproduce the original digital waveform. This method ensures low latency and high signal integrity while maintaining isolation.

商家经验真实案例 · 安全可信
电车快充口解析
本文详细解读新能源电车快充口的定义、工作原理及常见类型,帮助读者全面了解这一关键部件的功能与特点。

Key Features

The ISO7741DBQR offers several advantages for industrial applications. It provides up to 5000 VRMS isolation voltage, ensuring safety in high-voltage environments. The device also features low power consumption, typically drawing less than 1.7 mA per channel at 1 Mbps. Additional features include a wide operating temperature range (-40°C to +125°C), making it suitable for harsh industrial environments. The isolator supports data rates up to 100 Mbps, catering to high-speed communication requirements in modern automation systems.

Application Areas

This digital isolator is widely used in industrial automation systems, particularly in PLCs, motor drives, and power inverters. It provides essential isolation between control circuits and power stages, protecting sensitive electronics from high-voltage transients. Other common applications include isolated communication interfaces (RS-485, CAN), medical equipment, and renewable energy systems. The device's reliability and compliance with safety standards make it a preferred choice for critical isolation requirements.

Maintenance and Precautions

ISO7741DBQR 集成电路(IC) TI德州仪器 封装SSOP16 批号26+深圳市中芯巨能电子有限公司

The ISO7741DBQR requires minimal maintenance due to its solid-state design. However, proper PCB layout is crucial for optimal performance. Designers should maintain adequate creepage and clearance distances according to safety standards. When handling the device, observe standard ESD precautions to prevent damage to the sensitive semiconductor components. Avoid exposing the isolator to voltages beyond its specified ratings, as this may compromise the isolation barrier and device functionality.

商家经验真实案例 · 安全可信
U52电子管滤波电容选型
本文探讨U52电子管第一级滤波电容的合理容量选择,分析不同电路设计对滤波效果的影响,并提供实用选型建议,帮助优化电子管设备的电源稳定性。

B2B Procurement Guide

When procuring ISO7741DBQR isolators in bulk, verify the manufacturer's authenticity through authorized distributors. Texas Instruments provides quality assurance and technical support for genuine components. Consider lead times and minimum order quantities when planning purchases. For prototype or small-scale production, sample quantities are often available through distributor programs. Evaluate pricing tiers based on volume requirements, as significant discounts may apply for large orders.

Related Manufacturers