Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

ISO1176DWR

Updated: 2026-08-05

Overview

The ISO1176DWR is a galvanically isolated CAN transceiver designed for industrial and automotive applications. It provides robust communication in electrically noisy environments while complying with ISO 11898-2 standards. The device integrates signal conditioning, isolation, and bus protection in a single package. Manufactured using advanced semiconductor technology, this transceiver offers superior performance compared to non-isolated alternatives. Its isolated design prevents ground loops and protects sensitive electronics from voltage spikes, making it particularly valuable in heavy industrial settings and automotive systems.

Structure and Working Principle

ISO1176DWR 数字信号隔离模块 TI/德州仪器 封装SOP16 批次22+1深圳市龙宏电子科技有限公司

The ISO1176DWR consists of three main functional blocks: a logic interface, isolation barrier, and CAN bus driver. The isolation barrier uses capacitive or magnetic coupling to transmit signals while maintaining electrical separation between circuits. When transmitting, the device converts single-ended logic signals from a microcontroller into differential CAN bus signals. For reception, it performs the inverse operation while providing common-mode noise rejection. The integrated isolation barrier withstands up to 5kV RMS for 1 minute, ensuring reliable operation in harsh conditions.

商家经验真实案例 · 安全可信
烧录泡沫文化三极管
本文探讨了烧录泡沫文化三极管的概念及其在工业领域的应用,分析了其技术特点与潜在价值,为相关行业提供了新的视角和思考。

Key Features

This transceiver offers several technical advantages including high electromagnetic immunity (up to 200V/m), low emissions for EMC compliance, and wide operating voltage range (3V to 5.5V). The device supports data rates up to 1Mbps while consuming minimal power. Additional features include thermal shutdown protection, undervoltage lockout, and dominant timeout functions. The integrated failsafe features ensure the CAN bus enters a predictable state during fault conditions, preventing network disruption in critical applications.

Application Areas

Primary applications include industrial automation systems, heavy equipment control, automotive subsystems (especially EV and hybrid vehicles), and building automation. The isolation properties make it suitable for medical equipment and renewable energy systems where different ground potentials exist. In automotive contexts, it's commonly used in battery management systems, powertrain control, and advanced driver assistance systems. Industrial uses include PLC communications, motor control networks, and distributed I/O systems operating in electrically noisy environments.

Maintenance and Precautions

ISO1176TDWR 数字隔离器 TI德州仪器 封装SOIC16 批号26+深圳市中芯巨能电子有限公司

While the ISO1176DWR requires minimal maintenance, proper installation is crucial. Ensure adequate PCB spacing for isolation requirements and use recommended decoupling capacitors. Avoid bending or stressing the package to prevent damage to internal isolation structures. During handling, observe standard ESD precautions. For optimal performance, maintain clean power supplies and follow manufacturer-recommended layout guidelines. In high-temperature applications, consider thermal management to prevent exceeding maximum junction temperature specifications.

商家经验真实案例 · 安全可信
s8550三极管电源接法
本文详细解析s8550三极管与电源的正确连接方式,包括引脚识别、典型电路配置及常见应用场景,帮助读者掌握这一基础电子元件的使用方法。

B2B Procurement Guide

When sourcing ISO1176DWR transceivers, verify the manufacturer's quality certifications (typically IATF 16949 for automotive applications). Request detailed specifications including isolation voltage rating and operating temperature range. Consider purchasing from authorized distributors to ensure genuine components, especially important for mission-critical applications. Lead times can vary from 8-16 weeks depending on market conditions, so plan procurement accordingly. For prototype quantities, many distributors offer sample programs with reduced minimum order quantities.

Related Manufacturers