Overview
The integrated denitrification filter represents an advanced wastewater treatment technology that merges biological nitrogen removal with deep-bed filtration in a single tank. These systems are particularly valuable for municipal and industrial facilities needing to achieve stringent total nitrogen limits below 10 mg/L. Unlike conventional multi-stage treatment trains, the integrated design reduces footprint by 40-60% while maintaining treatment efficiency. Modern versions employ specialized plastic media that host denitrifying bacteria while simultaneously filtering suspended solids. The technology gained prominence in the 2010s as regulators intensified nitrogen discharge limits, especially in sensitive watersheds and coastal areas. Leading manufacturers offer modular configurations handling flows from 50 to 10,000 m³/day.
Structure and Working Principle
Structurally, the system consists of a watertight vessel containing stratified filtration media—typically 2-3 mm polyethylene beads or porous ceramic granules. Wastewater enters from the top, passing through an anoxic zone where facultative bacteria convert nitrates to nitrogen gas using methanol or other carbon sources. The lower section functions as a deep-bed filter, trapping particles as small as 5-10 microns. Automatic backwashing occurs at preset headloss levels (usually 1.5-2.5 m), with air-scouring followed by water rinsing to dislodge accumulated solids. Some advanced models incorporate real-time nitrate probes to optimize carbon dosage and backwash frequency.
Key Features
Space efficiency stands out as the primary advantage, with complete nitrogen removal achievable in a single tank versus traditional multi-tank systems. The simultaneous filtration eliminates the need for separate clarifiers or sand filters, reducing civil works costs by approximately 30%. Energy consumption is notably low (0.1-0.3 kWh/m³) compared to membrane bioreactors. Smart controls allow remote adjustment of backwash cycles based on actual loading rather than fixed timers, saving up to 20% in operating water usage. The media's large surface area (300-500 m²/m³) supports robust bacterial growth without clogging issues common in fixed-film reactors.
Application Areas
These filters are extensively deployed in municipal wastewater plants upgrading to meet Class IV discharge standards (TN<15 mg/L). They're particularly effective for treating effluent from oxidation ditches or sequencing batch reactors before final discharge. Industrial applications include food processing wastewater (especially meat and dairy), landfill leachate, and aquaculture systems. In water reuse projects, they serve as pretreatment for reverse osmosis by removing nitrogen that could cause membrane biofouling. Some coastal cities install them in pump stations to treat combined sewer overflows during heavy rains.
Maintenance and Precautions
Routine maintenance involves monthly inspection of distribution nozzles and quarterly media depth measurements to detect compaction or loss. The carbon source dosing system requires weekly calibration—underdosing reduces denitrification while overdosing increases effluent BOD. Operators should monitor backwash water turbidity; persistent high values (>20 NTU) indicate media wear or improper air-scour intensity. In cold climates, tank insulation or greenhouse enclosures may be needed to maintain optimal biological activity (15-30°C). Media replacement is typically needed every 8-12 years depending on influent solids loading.
B2B Procurement Guide
When sourcing these systems, buyers should verify performance data from at least three reference plants with similar wastewater characteristics. Key specifications to compare include: empty bed contact time (EBCT, ideally 20-40 minutes), nitrogen removal efficiency at design flow (target >85%), and backwash water consumption (% of treated flow). For large projects, consider pilot testing with actual wastewater over 2-3 months. Contract terms should include performance guarantees for effluent quality (TN, SS) and maximum energy/chemical consumption. Modular skid-mounted units offer faster deployment but may have higher per-unit costs than site-built concrete tanks.
Related Manufacturers
- 主营：聚丙烯酰胺、聚合氯化铝、活性炭、S型反硝化滤转、火山岩滤料、陶粒滤料、填料
- 主营：高剪机、加药系统、刮吸泥机、纤维转盘滤池、反硝化滤池、内进水微滤机、高密度沉淀池、回转式格栅机、纤维转盘过滤器、沉淀池、磁分离机、格栅、气浮机、砂水分离器
- 主营：[]
- 主营：水泥滤板快滤池、悬浮球填料、配套可调节滤头
- 主营：粉末活性炭、蜂窝活性炭、絮凝剂、反硝化、聚合氯化铝、聚丙烯酰胺、石英砂、无烟煤、Pac、Pam、除臭剂、脱色絮凝剂、纤维球、弹性填料
- 主营：一体化污水处理设备、焚烧炉、气浮机、曝气生物滤池、污水处理设备、斜管沉淀池、斜管沉淀器、溶气气浮机、生活污水处理设、屠宰污水处理设备、食品厂污水处理设备、化工污水处理设备、转盘过滤器、多介质过滤器、垃圾焚烧炉、生活垃圾焚烧炉、医院污水处理设备、生活污水处理设备、高密度沉淀池
- 主营：厌氧塔、吸泥机、旋转钟、生产BAF曝气生物滤池、螺旋砂、气浮机、过滤机、沉淀池、dtro垃圾、pp喷淋塔、污水预处、斜管斜板、溶气气浮、加药装置、厌氧装置、废水处理、机械格栅、沙场污水、机械加速、垃圾压缩、一体化设备、河道治理、高密度沉淀池、养殖废水处理、钟式沉沙机
- 主营：一体化污水处理设备、电絮凝设备、多点布水器、重力无阀滤池、核桃壳过滤器
- 主营：石英砂、火山岩、竹炭、反硝化、松树皮、陶粒、铸造石用英砂、斜管填料、火山石、沸石、活性炭、聚丙烯酰胺、聚合氯化铝、葡萄糖、悬浮球、空心球、彗星填料、硫酸铁、水处理石英砂、喷砂除锈、河道治理、尾水处理、污水处理厂、园林景观、流化床填料
- 主营：博渝环保、磁混凝设备、水分布滤砖、反硝化滤池、平板生物填料、点对点布水器
- 主营：PE污水处理设备、PE净化槽、厨余堆肥桶、反硝化、厨余垃圾堆肥、户外厨余堆肥、塑料制品定制、农村生活污水处理设备、一体化污水处理设备
- 主营：过滤器、刮渣机、格栅机、反硝化滤池、滗水器、除污机、叠螺机、过滤机、输送机、水器定制、旋转支撑、电动推杆、滗水装置、河道治理、污泥处理、杂物清理、河道格栅、气浮一体机、河道捞渣机、滚筒微滤机、浅层气浮设备、不锈钢滗析器、处理分离设备、行车式刮泥机、污泥储存料仓
- 主营：各类污水处理设备、真空过滤设备、厌氧反应器、一体化反硝化滤池、一体化污水处理设备、电絮凝气浮机、带式真空过滤机、加药装置等、过滤器、脱水设备、全自动加药装置、废水处理设备
- 主营：砂水分离器、旋流除砂器、一体化净水器、滤布滤池、刮泥机
- 主营：火山岩、斜管填料、松树皮、反硝化、泡沫滤珠、竹炭、陶粒、除臭箱填料、沸石、聚苯乙烯泡沫颗粒、活性碳、石英砂、生物填料、彗星滤料、流化床、空心球、喷砂除锈
- 主营：玻璃钢、气浮机、一体化pe、厌氧滤池、一体化pp、中水处理、景区酒店、厌氧滤罐、成套泵站、加压泵站、提升泵站、医疗污水、排涝泵站、预制泵站、智能泵站、雨水泵站、污水泵站、养猪污水、一体化污水、一体化预制、污水提升器、饭店隔油池、自来水泵站、一体化智能、整治污水站
- 主营：超磁分离水体净化一体化装备、磁沉淀水体净化一体化装备、拼装式污水处理厂、BAF(曝气生物滤池)一体化装备、反硝化深床滤池一体化装备、高效除氟一体化装备、深度除氟药剂
- 主营：玻璃钢、grp泵站、一体化pp、厌氧滤池、一体化ps、厌氧滤罐、一体化grp、预制泵站、提升泵站、污水泵站、泵站设备、水洗厂污水、污水净化槽、一体化智能、一体化污水、厌氧反应器、一体化预制、一体化雨水、加油站污水、污水处设备、一体化泵站、生物反应器、污水处理站、塑料清洗污水、污水处理系统
- 主营：管浮体、养鱼桶、600孔径、反硝化滤砖、孵化桶、线浮体、搅拌罐、搅拌桶、滤砖-pe、抽砂管、水泥桶、加药桶、泵浮体、印染桶、浮泵泵、搅拌机、砂管浮、浮箱-pe、hdpe滤砖、pe滚塑浮、底pe储罐、pe管道线、pe养殖桶、pe酸洗槽、管pe浮筒
- 主营：低温蒸发净化系统、厌氧氨氧化、IC厌氧反应器、曝气生物滤池、高效脱氮池、沼气火炬、蒸汽脱硝、废水处理设备、废气处理设备