Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Infrared CO₂ Sensor

Updated: 2026-07-22

Overview

Infrared CO2 sensors utilize non-dispersive infrared (NDIR) technology to measure carbon dioxide concentrations with high selectivity and stability. Unlike chemical sensors, NDIR sensors don't consume the sensing element, granting them a typical lifespan exceeding 10 years. These devices are critical for maintaining safe CO2 levels (usually below 1000 ppm in occupied spaces) and optimizing ventilation in buildings. Modern versions integrate smart features like temperature compensation and digital outputs (Modbus, I2C) for IoT applications.

Structure and Working Principle

防爆相机数码照相机红外摄像机环境应急行政执法装备配置青岛协诚创新环保科技有限公司

The sensor comprises an infrared emitter, optical chamber, interference filter (tuned to 4.26 µm), and a photodetector. CO2 molecules absorb specific IR wavelengths—the detector measures this absorption to calculate concentration via Beer-Lambert law. Advanced designs use dual-wavelength compensation to minimize drift from dust or aging. Some industrial models incorporate gas diffusion membranes to protect optics in harsh environments while maintaining measurement integrity.

商家经验真实案例 · 安全可信
生物毒性监测仪报警原因
本文解析生物毒性在线监测仪常见的报警原因,包括水质突变、设备故障及环境干扰,并提供针对性排查思路,帮助快速定位问题源头。

Key Features

Modern NDIR sensors achieve <±50 ppm accuracy even at 400 ppm (atmospheric baseline), with response times under 2 minutes. They're immune to cross-interference from other gases like methane or VOCs. Energy-efficient variants consume <3 mA, enabling battery operation. IP-rated housings (up to IP65) allow outdoor use. Some premium models include onboard data logging and wireless connectivity (LoRaWAN, Bluetooth) for remote monitoring networks.

Application Areas

HVAC systems use these sensors for demand-controlled ventilation, reducing energy costs by 20-30% versus fixed-rate systems. In agriculture, they monitor greenhouse CO2 for optimized plant growth (1000-1500 ppm ideal). Industrial safety applications include confined space monitoring (OSHA limits: 5000 ppm 8-hour TWA). Emerging uses include CO2-based occupancy detection in smart buildings and fermentation process control in breweries.

Maintenance and Precautions

华云GXH-3010E便携式红外线二氧化碳分析仪可以定制测量范围青岛路博建业环保科技有限公司

Annual calibration with certified gas (usually 1000 ppm CO2 in nitrogen) is recommended. Avoid mounting near air vents or heat sources that could distort measurements. For dirty environments (e.g., farms), use sensors with particle filters. Condensation can permanently damage optics—select heated versions (5-10°C above ambient) for high-humidity applications. Store unused units with protective caps.

商家经验真实案例 · 安全可信
废水检测黑科技
本文揭秘废水检测领域的前沿技术,从纳米传感器到AI分析系统,再到生物标记物追踪,展现现代科技如何让废水检测更智能、更精准,为环境保护提供新思路。

B2B Procurement Guide

For bulk purchases (50+ units), negotiate module-level pricing—expect 15-30% discounts. Verify supplier certifications (ISO 17025 calibration labs preferred). Lead times vary: 2-4 weeks for standard models, up to 12 weeks for customized industrial versions. Request sample testing with your specific gas mixture to validate performance. Consider total cost of ownership, including recalibration services (typically $50-$150 per sensor annually).

Related Manufacturers