Overview
Industrial-grade nylon, a subset of polyamide (PA) polymers, is engineered for demanding mechanical and thermal applications. Unlike standard nylon, it undergoes additional processing (e.g., reinforcement with glass fibers) to enhance load-bearing capacity and dimensional stability. First commercialized by DuPont in the 1930s, industrial variants now include PA6, PA66, and PA12, each tailored for specific stress and environmental conditions. It accounts for approximately 35% of engineering plastic usage globally due to its versatility.
Physical and Chemical Properties
Industrial nylon exhibits a crystalline structure that provides high tensile strength (up to 90 MPa) and elongation at break (15–300%). Its low coefficient of friction (0.1–0.3) makes it ideal for moving parts. Chemically, it resists hydrocarbons, alkalis, and diluted acids but degrades in strong oxidizers. Moisture absorption (up to 8% by weight) can affect dimensional accuracy, requiring pre-drying before processing. Thermal stability ranges from -40°C to 120°C (higher for glass-filled grades).
Main Applications
Primary uses include automotive components (e.g., radiator end tanks, intake manifolds) where metal replacement reduces weight. In machinery, it’s used for wear strips, conveyor belts, and self-lubricating bearings. Industrial textiles benefit from its UV-stabilized variants for filtration screens and hopper linings. Emerging applications include 3D-printed functional prototypes and drone frames, leveraging its strength-to-weight ratio.
Safety and Storage
While non-toxic, machining generates fine dust requiring NIOSH-approved respirators. Processors should use local exhaust ventilation to maintain airborne levels below 10 mg/m³. Store in sealed containers with desiccants to prevent moisture absorption. Prolonged UV exposure causes embrittlement; stabilized grades or opaque packaging is recommended. Bulk storage temperatures should not exceed 30°C to prevent premature aging.
B2B Procurement Guide
Key specifications to confirm: tensile modulus (1–3 GPa), Izod impact strength (50–150 J/m), and heat deflection temperature (60–200°C). Glass-filled grades (30–50% content) offer higher rigidity but lower machinability. Order samples to test processing parameters like drying time (typically 4–6 hours at 80°C). For large orders, negotiate MOQs (commonly 1–5 tons) and lead times (2–8 weeks). Certifications like ISO 9001 and UL listings indicate consistent quality.
Related Manufacturers
- 主营：PA66、POM、PA6、TPU
- 主营：植毛刷、条刷辊、毛料刷、尼龙麻花刷、弹簧刷、条形刷辊、铝合金条刷、内绕弹簧毛刷、PVC毛刷板、缝隙刷、工业毛刷辊、果蔬清洗刷辊、剑麻纱布辊、铝合金板刷、皮带刷、外绕式弹簧刷、缠绕条刷、清洗抛光刷子、球头刷
- 主营：塑胶原料
- 主营：耐高温材料、LCP、PPA、尼龙原料、PC、PC/ABS、PPS、EVA、PP、POM、POE、PA6、PA66、TPU、PET、ABS、聚丙烯、PA12、PBT、PPO、PPE、合金料、LDPE、万华化学tpu、HDPE
- 主营：十溴二苯乙烷、三溴新戊醇、溴化钠、溴化钾照相级、氢溴酸、溴化钙、溴化钾、溴化铵、溴乙烷、2-溴丙烷、三(三溴新戊基)磷酸、二溴新戊二醇、聚丙烯酸五溴苄基酯、溴化锌、溴化SBS、甲基八溴醚
- 主营：研磨刷、凸齿轮、吸水海绵、尼龙丝研磨轮、含磨料尼龙针刷、抛光工具、手动拉丝轮、六角钉齿轮、火山灰磨刷轮、高稳定性配件、高效研磨工具、研磨系列刷轮、不织布研磨轮、抛光研磨工具、研磨高切削刷轮、耐热海绵吸水辊、切削不织布刷轮
- 主营：尼龙棒、pp板、pp棒
- 主营：塑胶原料
- 主营：cnc手板定制、模型制作、金属cnc、尼龙材料、手板加工、3d打印手板、Cnc手板
- 主营：奇美ABS塑胶原料、TPV耐高温密封原料、台湾台化ABS高刚性、尼龙PA66加纤塑料、美国杜邦PA66尼龙、韩国锦湖ABS通用级、陶氏POE增韧级、乐天化学EVA热熔级、热塑性弹性体TPU、日本东丽PPS耐高温、日本宝理POM赛钢、SarlinkTPV、可降解塑料PLA、沙伯基础PC聚碳酸酯、韩国SKPP聚丙烯、韩国LGABS耐高温、奇美HIPS高抗冲、SABIC PC高透、TPV热塑性硫化橡胶、美国陶氏EAA热熔胶、POM聚甲醛塑料、薄膜TPU塑料、齿轮POM塑料、美国杜邦EMA高柔韧、埃克森LLDPE薄膜
- 主营：工程塑料、特种工程塑料、改性塑料
- 主营：雕白块、雕白粉、三乙醇胺
- 主营：电子绝缘件尼龙、工程塑料、特种工程塑胶、热塑性弹性体
- 主营：PC、POM、PA66、TPU、PC/ABS、ABS、PCTG
- 主营：输送线、刮刀板、耐磨upe、尼龙板、尼龙轮、耐磨-pe、pa6棒管、耐磨板、支腿垫、耐磨条、输送机、法兰盘、灌装机、板材upe、橡胶辊、聚丙烯、链条垫、聚氨酯、含硼板、硫酸槽、条垫轨、塑料板、pom滚轮、pvc板材、送设备
- 主营：tb-6000-85、mp-1580-l3、tk-4001-85uv、g7410-1000-00