Aicaigou LogoB2B Wiki

INA128UA/2K5

Updated: 2026-07-21

Overview

The INA128UA/2K5 is a precision instrumentation amplifier manufactured by Texas Instruments. Designed for accurate signal amplification in demanding environments, this IC features low noise, high common-mode rejection ratio (CMRR), and excellent DC precision. As a surface-mount device in SOIC-8 packaging, it's widely used in industrial measurement systems, medical equipment, and sensor interfaces where small differential signals need to be amplified while rejecting interference.

Structure and Working Principle

The INA128UA/2K5 consists of three op-amps in a classic instrumentation amplifier configuration with precision laser-trimmed resistors. The device amplifies the voltage difference between its two inputs while rejecting signals common to both inputs. The gain can be set from 1 to 10,000 using a single external resistor. Internal protection diodes guard against input overvoltages, making it suitable for harsh industrial environments where transient voltages may occur.

Key Features

Key specifications include a low offset voltage (50μV max), low drift (0.5μV/°C), and high CMRR (120dB min). The wide supply voltage range (±2.25V to ±18V) allows flexibility in various system designs. The device operates over the industrial temperature range (-40°C to +85°C) and features low quiescent current (700μA max), making it suitable for battery-powered applications where power efficiency is critical.

Application Areas

Primary applications include medical instrumentation (ECG amplifiers, patient monitors), industrial process controls (strain gauge amplifiers, thermocouple interfaces), and test/measurement equipment. In the automotive sector, it's used for sensor signal conditioning in pressure monitoring systems and position sensors. The aerospace industry employs these amplifiers in flight data acquisition systems and structural health monitoring.

Maintenance and Precautions

Proper handling requires ESD precautions - use grounded workstations and wrist straps. Avoid exceeding absolute maximum ratings for input voltages and power supply ranges. For optimal performance, follow PCB layout guidelines including proper grounding, decoupling capacitors close to power pins, and minimizing parasitic capacitance at the inputs. Thermal considerations are generally minimal due to the device's low power dissipation.

B2B Procurement Guide

When procuring INA128UA/2K5 components, verify authenticity as counterfeit semiconductors are common. Authorized distributors and franchised partners are recommended sources. Consider ordering samples for testing before large purchases. Lead times can vary (typically 6-12 weeks for large quantities), so plan procurement accordingly. Some suppliers may offer alternative packaging (tubes, reels) - specify your requirements clearly.

Related Manufacturers