IMP811TEUS-T

Overview

The IMP811TEUS-T is a voltage detector designed for monitoring microprocessor power supplies. It ensures reliable system operation by generating a reset signal when the supply voltage falls below a predetermined threshold. This component is widely used in industrial controls, automotive electronics, and consumer devices. Manufactured with precision semiconductor technology, the IMP811TEUS-T offers low power consumption and high accuracy. Its compact SOT-23 package makes it suitable for space-constrained applications. The device is particularly valued for its reliability in critical systems where voltage stability is paramount.

Structure and Working Principle

深圳市鸿昌盛电子科技有限公司

The IMP811TEUS-T consists of a voltage reference, comparator, and output driver. When the monitored voltage drops below the threshold, the comparator triggers the output driver to assert a reset signal. This signal remains active until the voltage returns to a safe operating level. The device incorporates hysteresis to prevent false triggering during voltage fluctuations. Typical threshold options include 2.63V, 3.08V, and 4.38V, making it adaptable to various system requirements. The internal design ensures minimal current draw during both active and standby modes.

商家经验真实案例 · 安全可信

东莞全自动电感

本文探讨东莞地区全自动电感设备的特点、应用场景及选购要点，帮助工业采购者了解其核心优势与适配性，为设备选型提供参考。

Key Features

Key features of the IMP811TEUS-T include an operating voltage range of 1.2V to 5.5V, making it versatile for different applications. The device offers a typical accuracy of ±1.5% across the industrial temperature range (-40°C to +85°C). Additional benefits include a 140ms minimum reset timeout period and push-pull output configuration. The component's small form factor and RoHS compliance make it suitable for modern, environmentally conscious designs. These characteristics combine to provide reliable performance in demanding environments.

Application Areas

Primary applications include embedded systems, industrial controllers, and automotive electronics where reliable power monitoring is essential. The IMP811TEUS-T is commonly found in microcontroller-based designs, ensuring proper system initialization and recovery from power disturbances. Consumer electronics such as smart home devices and portable gadgets also benefit from this component's features. Its ability to operate across wide voltage ranges makes it particularly useful in battery-powered applications where voltage levels may vary significantly during operation.

Maintenance and Precautions

北京首天伟业科技有限公司

Proper handling of the IMP811TEUS-T requires attention to electrostatic discharge (ESD) protection during installation and maintenance. Soldering should be performed within recommended temperature profiles to prevent damage to the semiconductor components. When designing with this component, ensure adequate decoupling capacitors are placed near the power pins. The reset output should be properly terminated to avoid signal integrity issues. Regular system testing should include verification of the voltage detector's response to power fluctuations.

商家经验真实案例 · 安全可信

测10uh电感用多少频率

本文解析测量10μH电感时频率选择的关键要点，包括基础频率范围、寄生参数影响及高频测试技巧，帮助工程师获得准确测量结果。

B2B Procurement Guide

When procuring the IMP811TEUS-T in bulk, verify the manufacturer's certification and product traceability. Genuine components should be sourced from authorized distributors to avoid counterfeit products. Minimum order quantities typically range from 1,000 to 10,000 units for volume pricing. Lead times vary depending on market conditions but generally range from 8 to 12 weeks for large orders. Consider alternative part numbers from the same family (such as IMP811TEUS-T7) for design flexibility. Quality assurance documentation should be requested for critical applications.