Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

High-Temperature Insulating Cement

Updated: 2026-07-15

Overview

High-temperature insulating cement is an engineered refractory material composed of alumina-silicate binders, lightweight aggregates, and thermal stabilizers. Developed for industrial applications requiring sustained thermal insulation, it bridges the gap between conventional cement and ceramic fiber products. Unlike standard mortars, this specialty cement maintains structural integrity at continuous operating temperatures exceeding 1,200°C (2,192°F). Its unique formulation combines low thermal conductivity with mechanical strength, making it indispensable for energy-intensive industries.

Physical and Chemical Properties

建鑫 高温胶泥 保温棉粘接剂 耐高温无机粘合剂 硅酸铝胶 实力厂家河间市建鑫保温材料有限公司

The material exhibits a dry density range of 0.8-1.6 g/cm³, significantly lower than traditional refractory cements, contributing to its insulation efficiency. Thermal conductivity typically measures 0.15-0.35 W/m·K at 800°C (1,472°F), varying with composition. Chemically inert formulations resist acid/alkali corrosion (pH stability 4-12) and prevent thermal spalling through controlled porosity. The setting time ranges from 2-8 hours depending on ambient conditions, with full cure achieving compressive strengths of 5-15 MPa after heat treatment.

商家经验真实案例 · 安全可信
耐火浇注料配比
本文探讨耐火浇注料的配比原则,分析骨料、粉料和结合剂的优化组合方式,并分享提升施工性能的实用技巧,为工业窑炉内衬提供可靠解决方案。

Main Applications

Primary use cases include sealing joints in industrial furnaces, patching cracks in boiler insulation, and creating thermal barriers in petrochemical reactors. Metallurgical plants employ it for ladle and tundish linings where rapid temperature fluctuations occur. In power generation, it serves as backup insulation for steam pipes and turbine casings. Emerging applications include aerospace component testing rigs and waste incineration systems, where temperatures exceed 1,400°C (2,552°F) intermittently.

Safety and Storage

恒诚 隔热高温粘合剂 粘接耐高温硅酸铝保温材料 高 温胶泥 可定制廊坊恒诚保温材料有限公司

Dry powder forms require dust control measures during mixing - OSHA mandates local exhaust ventilation or P100 respirators. Cured material poses minimal risk unless mechanically disturbed, releasing respirable crystalline silica. Storage life in original packaging exceeds 12 months when kept below 30°C (86°F) and relative humidity under 65%. Bulk bags should be palletized and covered with moisture-proof sheeting. Partially used containers must be resealed with desiccant packs to prevent premature hydration.

商家经验真实案例 · 安全可信
高铝水泥耐火浇注料
本文解析高铝水泥耐火浇注料的特性与应用场景,探讨其耐高温原理与施工要点,并分享延长使用寿命的实用技巧。

B2B Procurement Guide

Industrial buyers should specify: 1) Maximum service temperature (continuous/intermittent) 2) Required thermal conductivity class per ASTM C447 3) Bonding method (air-setting, heat-activated) 4) Chemical compatibility with process gases. Quality indicators include third-party certifications like ISO 9001 and EN 1402-3. For large projects, request factory production control certificates and batch test reports. Consider regional suppliers for emergency repairs to minimize downtime from logistics delays.

Related Manufacturers